Personal menu

Manufacturer:

FOSROC RENDEROC GP 25KG BAGS

A general purpose cementitious repair mortar which has been specifically engineered for vertical repair work. It can be applied in sections up to 70mm thickness in vertical locations and up to 60mm thickness in overhead locations in a single application and without the use of formwork. Unit Size: 25kg bag

Availability: 289 in stock

Depot Stock

Bury St Edmunds Depot	44 in stock
Kent Depot	31 in stock
Midlands Depot	51 in stock
Sheffield Depot	11 in stock
West London Depot	152 in stock

£37.37 excl tax

Qty:

i h

Overview
Specifications
Downloads
Product Disclaimer
Contact Us

Uses:
◇ For the reinstatement of concrete where low permeability characterisitcs are required but where high compressive strength is not the most important consideration.
◇ Renderoc GP has been specifically developed as a general purpose repair mortar that can also be used as a render coat.
◇ Renderoc GP is suitable for repair methods 3.1, 3.3, 4.4, 7.1, 7.2 as defined by BS EN 1504-3.

Advantages:
◇ Compatibility with concrete of compressive strength 20-35N/mm²
◇ Frequently obviates the need for formwork
◇ Extremely low permeability to water, carbon dioxide and chlorides
◇ Exceptional system of shrinkage compensation provides long-term dimensional stability
◇ Can be applied quickly and efficiently by wet spraying
◇ One component, pre-bagged to overcome site-batched variations
◇ Contains no chloride admixtures
◇ Shade can be varied with Renderoc Lightener/Darkener

Products specifications

Shelf Life	The product has a shelf life of 12 months from the date of manufacture if kept in dry storage in the original, unopened bags. If stored at high temperatures and/or high humidity the shelf life may be reduced to less than 6 months.
Coverage	Approximately 16 litres /25kg bag (approximately 1.6m² at 10 mm thickness)

Technical Datasheet

The product image(s) shown are for illustration purposes only and may not be an exact representation of the product.

The recommendations relating to the application and end-use of the products mentioned are based on our current knowledge and experience of the products when properly stored, handled and applied under normal conditions. All product specification, information and data made available on the website is subject to change. All information presented is believed to be accurate and reliable, but is given without guarantee, warranty or responsibility of any kind.

Your name *

Your email *

Subject: *

Enquiry *

Customers who bought this item also bought

FOSROC CONBEXTRA GP GROUT 25 KILO B

Fosroc Conbextra GP Grout is a high-flow, nonshrink cementitious grout, conforming to the requirements of BS EN 1504-3 Class R4 and BS EN 1504-6: Anchoring of a reinforcing steel bar. Used for grouting gap thicknesses 10 to 75mm. Unit Size: 25kg

Stock Status: 720 in stock

£11.51 excl tax

FOSROC RENDEROC LA55 25kgs Bag

A high performance, free flowing low alkali micro concrete conforming to the requirements of BS EN 1504-3 Class R4. Renderoc LA55 is designed for large volume repairs typically in excess of 25mm deep. Unit Size: 25kg bags

Stock Status: 181 in stock

£37.77 excl tax

FOSROC NITOPRIME ZINC RICH 800ml

An anti-corrosion primer for exposed steel reinforcement, for use with Fosroc concrete repair mortars. Unit Size: 800ml can

Stock Status: 17 in stock

£44.83 excl tax

GRACE B1 PRIMER 5 LITRE CAN

GCP Bituthene Primer B1 is a quick drying all temperature primer to enable same hour application of Bituthene membranes. Unit Size: 5 ltr can

Stock Status: 25 in stock

£39.48 excl tax

Products from the Same Manufacturer

FOSROC CONBEXTRA GP GROUT 25 KILO B

Stock Status: 720 in stock

£11.51 excl tax

FOSROC GX GUN 600cc (FOR FOILED PRODUCTS - SAUSAGES)

(FOR FOILED PRODUCTS - SAUSAGES)

Stock Status: 35 in stock

£65.17 excl tax

FOSROC LOKFIX E35S 300ml CARTRIDGE

Fosroc Lokfix E35S is a two component polyester anchoring material, supplied in single component cartridges with a static mixer nozzle. When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates. Unit Size: 300ml

Stock Status: Out of stock

£276.20 excl tax

FOSROC LOKFIX E55S 300ml CARTRIDGE

Fosroc Lokfix E55S is a two component vinyl-ester anchoring material, supplied in single component cartridges with a static mixer nozzle. When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates. Unit Size: 300ml

Stock Status: Out of stock

£293.15 excl tax

FOSROC LOKFIX E75 APPLICATOR GUN

Applicator gun for Lokfix E75 Unit Size: Each

Stock Status: Out of stock

£58.74 excl tax

FOSROC LOKFIX E77 585ml CARTRIDGE (sold by cartridge)

A two-component epoxy anchoring material, supplied in 3:1 ratio side-by-side cartridges with a static mixer nozzle. When applied it sets and cures to firmly secure a variety of steel fixings into concrete and solid masonry substrates. Unit Size: 385ml

Stock Status: Out of stock

£30.89 excl tax

FOSROC LOKFIX S25 2.5Ltr BLUE LID

A two component polyester anchoring grout supplied in pre-measured quantities. The material cures quickly to give consistent, high performance anchorages. It is a pourable grade, with a 25 minute gel time at 20°c for use in vertical down holes where the hole is 8 to 40mm greater in diameter than the bar. Unit Size: 2.5ltr

Stock Status: Out of stock

£66.38 excl tax

FOSROC MS300 SEALANT 600cc

A one part, high modulus sealant based on hybrid silyl modified polyether technology. It has a rapid rate of cure and forms a tough elastomer capable of supporting heavy wheel loads. It may be applied between 6mm and 20mm wide, for internal trafficked flush joints and up to 40mm wide, for non-tracked/recessed tracked joints. Unit Size: 600ml

Stock Status: 932 in stock

£11.45 excl tax

FOSROC MS60 SEALANT GREY 380CC

A one part, low modulus sealant based on hybrid silyl modified polyether technology. It is suitable for sealing joints in concrete, brickwork, blockwork, perimeter sealing around doors and windows, and non-trafficked floor joints. Unit Size: 380ml

Stock Status: Out of stock

£11.34 excl tax

FOSROC MULSEAL DP 25LTR

A single part bitumen latex emulsion, applied by brush or squeegee. The incorporation of rubber latex imparts elasticity to the dried coating. Mulseal DP is suitable for use on most building materials such as concrete, brickwork, metals and stone. Unit Size: 25ltr

Stock Status: Out of stock

£142.68 excl tax

FOSROC RENDEROC GP 25KG BAGS

Payment options