Personal menu

Manufacturer:

FOSROC NITOPRIME ZINC RICH 800ml

An anti-corrosion primer for exposed steel reinforcement, for use with Fosroc concrete repair mortars. Unit Size: 800ml can

Availability: 17 in stock

Depot Stock

Bury St Edmunds Depot	8 in stock
Kent Depot	2 in stock
Midlands Depot	6 in stock
Sheffield Depot	1 in stock
West London Depot	Out of stock

£44.83 excl tax

Qty:

i h

Overview
Specifications
Downloads
Product Disclaimer
Contact Us

Uses:
◇ Nitoprime Zincrich actively resists corrosion within the confines of the repair location and avoids the generation of incipient anodes in immediantly adjacent location.

Advantages:
◇ 'Active' zinc-rich system combats corrosion by electrochemical means
◇ Formulated for use with Renderoc repair products
◇ Single component product - easy to use with no restrictive pot life
◇ Time saving - touch dry after 15 to 45 minutes
◇ Economical - single component ensures almost no waste.

Products specifications

Coverage	8 m2 / litre
Unit Sizes Available	1.9 litre and 800ml cans
Shelf Life	Store in dry conditions in the original containers. Nitoprime Zincrich Plus and Fosroc Solvent 102 have a shelf life of 12 months if kept in a dry store in the original, unopened containers. If stored at high temperatures and/or high humidity conditions the shelf life may be reduced.

Technical Datasheet

The product image(s) shown are for illustration purposes only and may not be an exact representation of the product.

The recommendations relating to the application and end-use of the products mentioned are based on our current knowledge and experience of the products when properly stored, handled and applied under normal conditions. All product specification, information and data made available on the website is subject to change. All information presented is believed to be accurate and reliable, but is given without guarantee, warranty or responsibility of any kind.

Your name *

Your email *

Subject: *

Enquiry *

Customers who bought this item also bought

FOSROC RENDEROC S CONCRETE REPAIR 2

A high strength, polymer modified, cementitious repair material which has been specifically engineered for vertical or horizontal use. It can be applied up to 10mm thickness in vertical locations and up to 100mm thickness in horizontal locations in a single application. Unit Size: 25kg

Stock Status: 184 in stock

£40.31 excl tax

FOSROC RENDEROC GP 25KG BAGS

A general purpose cementitious repair mortar which has been specifically engineered for vertical repair work. It can be applied in sections up to 70mm thickness in vertical locations and up to 60mm thickness in overhead locations in a single application and without the use of formwork. Unit Size: 25kg bag

Stock Status: 289 in stock

£37.37 excl tax

FOSROC RENDEROC PRIMER 5kg (2 PARTS, BAG & BOTTLE)

A two component cementitious slurry material compromising specially selected cementitious powders and liquid polymer additives. The mixed slurry is applied to properly prepared concrete, the specific Renderoc repair material is then compacted into the primer whilst this is still wet. Unit Size: 4kg Part A & 1 ltr Part B, or 20kg Part A & 5 ltrs Part B

Stock Status: 83 in stock

£22.08 excl tax

Products from the Same Manufacturer

FOSROC CONBEXTRA GP GROUT 25 KILO B

Fosroc Conbextra GP Grout is a high-flow, nonshrink cementitious grout, conforming to the requirements of BS EN 1504-3 Class R4 and BS EN 1504-6: Anchoring of a reinforcing steel bar. Used for grouting gap thicknesses 10 to 75mm. Unit Size: 25kg

Stock Status: 720 in stock

£11.51 excl tax

FOSROC GX GUN 600cc (FOR FOILED PRODUCTS - SAUSAGES)

(FOR FOILED PRODUCTS - SAUSAGES)

Stock Status: 35 in stock

£65.17 excl tax

FOSROC LOKFIX E35S 300ml CARTRIDGE

Fosroc Lokfix E35S is a two component polyester anchoring material, supplied in single component cartridges with a static mixer nozzle. When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates. Unit Size: 300ml

Stock Status: Out of stock

£276.20 excl tax

FOSROC LOKFIX E55S 300ml CARTRIDGE

Fosroc Lokfix E55S is a two component vinyl-ester anchoring material, supplied in single component cartridges with a static mixer nozzle. When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates. Unit Size: 300ml

Stock Status: Out of stock

£293.15 excl tax

FOSROC LOKFIX E75 APPLICATOR GUN

Applicator gun for Lokfix E75 Unit Size: Each

Stock Status: Out of stock

£58.74 excl tax

FOSROC LOKFIX E77 585ml CARTRIDGE (sold by cartridge)

A two-component epoxy anchoring material, supplied in 3:1 ratio side-by-side cartridges with a static mixer nozzle. When applied it sets and cures to firmly secure a variety of steel fixings into concrete and solid masonry substrates. Unit Size: 385ml

Stock Status: Out of stock

£30.89 excl tax

FOSROC LOKFIX S25 2.5Ltr BLUE LID

A two component polyester anchoring grout supplied in pre-measured quantities. The material cures quickly to give consistent, high performance anchorages. It is a pourable grade, with a 25 minute gel time at 20°c for use in vertical down holes where the hole is 8 to 40mm greater in diameter than the bar. Unit Size: 2.5ltr

Stock Status: Out of stock

£66.38 excl tax

FOSROC MS300 SEALANT 600cc

A one part, high modulus sealant based on hybrid silyl modified polyether technology. It has a rapid rate of cure and forms a tough elastomer capable of supporting heavy wheel loads. It may be applied between 6mm and 20mm wide, for internal trafficked flush joints and up to 40mm wide, for non-tracked/recessed tracked joints. Unit Size: 600ml

Stock Status: 932 in stock

£11.45 excl tax

FOSROC MS60 SEALANT GREY 380CC

A one part, low modulus sealant based on hybrid silyl modified polyether technology. It is suitable for sealing joints in concrete, brickwork, blockwork, perimeter sealing around doors and windows, and non-trafficked floor joints. Unit Size: 380ml

Stock Status: Out of stock

£11.34 excl tax

FOSROC MULSEAL DP 25LTR

A single part bitumen latex emulsion, applied by brush or squeegee. The incorporation of rubber latex imparts elasticity to the dried coating. Mulseal DP is suitable for use on most building materials such as concrete, brickwork, metals and stone. Unit Size: 25ltr

Stock Status: Out of stock

£142.68 excl tax

FOSROC NITOPRIME ZINC RICH 800ml

Payment options