Personal menu

Manufacturer:

FOSROC RENDEROC LA55 25kgs Bag

Fosroc Renderoc LA55 ia high performance, free flowing low alkali micro concrete conforming to the requirements of BS EN 1504-3 Class R4.

Renderoc LA55 is designed for large volume repairs typically in excess of 25mm deep.

Unit Size: 25kg bags

Availability: 252 in stock

Depot Stock

Bury St Edmunds Depot	113 in stock
Kent Depot	31 in stock
Midlands Depot	96 in stock
Sheffield Depot	Out of stock
West London Depot	12 in stock

£37.77 excl tax

Qty:

i h

Overview
Specifications
Downloads
Product Disclaimer
Contact Us

Uses:
◇ For the reinstatement of reinforced concrete where low permeability characteristics are required and where high compressive strength is a consideration.
◇ Renderoc LA55 has been specifically developed for the repair of large areas of concrete where access is restricted or where reinforcement is congested. It can be applied in section thicknesses from 25-200mm.
◇ It is suitable for use where excellent chloride and carbon dioxide resistance is required or for repairs to concrete affected by alkali-silica reaction (ASR). Renderoc LA55 is alkaline in nature and will protect embedded steel reinforcement.
◇ Renderoc LA55 is suitable for repair methods 3.2, 4.4, 7.1, 7.2 as defined by BS EN 1504-3.

Advantages:
◇ Maximum compatibility with concrete of compressive strength 30-60 N/mm²
◇ Exceptional system of shrinkage compensation in plastic and hardened states - allows high application thickness
◇ Low alkali content minimises risk of alkali-silica reaction
◇ Exceptional bond to concrete substrates without independent primer
◇ Suitable for placement by pumping or pouring techniques into restricted locations
◇ Self-compacting nature eliminates honeycombing and displaces air without vibration
◇ High strength and low permeability provide maximum protection against carbon dioxide and chlorides
◇ Pre-bagged to overcome site-batched variations-only the site addition of clean water is required
◇ Contains no chloride admixtures
◇ Suitable for use with cathodic protection systems

Products specifications

Coverage	Approx. 12.0 litres / 25 kg bag
Shelf Life	The product has a shelf life of 12 months from the date of manufacture if kept in dry storage in the original, unopened bags. If stored at high temperatures and/or high humidity the shelf life may be reduced to less than 6 months.

Technical Datasheet

The product image(s) shown are for illustration purposes only and may not be an exact representation of the product.

The recommendations relating to the application and end-use of the products mentioned are based on our current knowledge and experience of the products when properly stored, handled and applied under normal conditions. All product specification, information and data made available on the website is subject to change. All information presented is believed to be accurate and reliable, but is given without guarantee, warranty or responsibility of any kind.

Your name *

Your email *

Subject: *

Enquiry *

Customers who bought this item also bought

FOSROC RENDEROC GP 25KG BAGS

Fosroc Renderoc GP is a general purpose cementitious repair mortar which has been specifically engineered for vertical repair work.

It can be applied in sections up to 70mm thickness in vertical locations and up to 60mm thickness in overhead locations in a single application and without the use of formwork.

Unit Size: 25kg bag

Stock Status: 331 in stock

£37.37 excl tax

FOSROC RENDEROC LA60 25kgs Bag

Fosroc Renderoc LA60 is a high performance free flowing low alkali micro concrete conforming to the requirements of Highways England Specfication for Highways Works and EN1504-3 Structural and Non-structural concrete Class R4.

Renderoc LA60 can typically be applied in thicknesses between 25 and 300mm whilst minimising risk of thermal cracking.

Unit Size: 25kg bag

Stock Status: 78 in stock

£45.42 excl tax

GRACE B1 PRIMER 5 LITRE CAN

GCP Bituthene Primer B1 is a quick drying all temperature primer to enable same hour application of Bituthene membranes. Unit Size: 5 ltr can

Stock Status: 24 in stock

£39.48 excl tax

GRACE BITUTHENE LM LIQUID MEMBRANE

GCP Bituthene LM is a two component elastomeric liquid applied detailing compound for use with GCP Applied Technologies waterproof membranes. Unit Size: 5.7 litre pack (Parts A & B)

Stock Status: 181 in stock

£171.74 excl tax

Products from the Same Manufacturer

FOSROC CONBEXTRA GP GROUT 25 KILO B

Fosroc Conbextra GP Grout is a high-flow, nonshrink cementitious grout, conforming to the requirements of BS EN 1504-3 Class R4 and BS EN 1504-6: Anchoring of a reinforcing steel bar.

Used for grouting gap thicknesses 10 to 75mm.

Unit Size: 25kg

Stock Status: 853 in stock

£11.51 excl tax

FOSROC GX GUN 600cc (FOR FOILED PRODUCTS - SAUSAGES)

(FOR FOILED PRODUCTS - SAUSAGES)

Stock Status: 36 in stock

£65.17 excl tax

FOSROC LOKFIX E35S 300ml CARTRIDGE

Fosroc Lokfix E35S is a two component polyester anchoring material, supplied in single component cartridges with a static mixer nozzle.
When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates.

Unit Size: 300ml

Stock Status: Out of stock

£276.20 excl tax

FOSROC LOKFIX E55S 300ml CARTRIDGE

Fosroc Lokfix E55S is a two component vinyl-ester anchoring material, supplied in single component cartridges with a static mixer nozzle.
When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates.

Unit Size: 300ml

Stock Status: Out of stock

£293.15 excl tax

FOSROC LOKFIX E75 APPLICATOR GUN

Applicator gun for Lokfix E75 Unit Size: Each

Stock Status: Out of stock

£58.74 excl tax

FOSROC LOKFIX E77 585ml CARTRIDGE (sold by cartridge)

Fosroc Lokfix E77 is a two-component epoxy anchoring material, supplied in 3:1 ratio side-by-side cartridges with a static mixer nozzle.
When applied it sets and cures to firmly secure a variety of steel fixings into concrete and solid masonry substrates.

Unit Size: 385ml

Stock Status: Out of stock

£30.89 excl tax

FOSROC LOKFIX S25 2.5Ltr BLUE LID

Fosroc Lokfix S25 is a two component polyester anchoring grout supplied in pre-measured quantities.

The material cures quickly to give consistent, high performance anchorages.

It is a pourable grade, with a 25 minute gel time at 20°c for use in vertical down holes where the hole is 8 to 40mm greater in diameter than the bar.

Unit Size: 2.5ltr

Stock Status: Out of stock

£66.38 excl tax

FOSROC MS300 SEALANT 600cc

Fosroc Nitoseal MS300 is a one part, high modulus sealant based on hybrid silyl modified polyether technology.
It has a rapid rate of cure and forms a tough elastomer capable of supporting heavy wheel loads.
It may be applied between 6mm and 20mm wide, for internal trafficked flush joints and up to 40mm wide, for non-tracked/recessed tracked joints.

Unit Size: 600ml

Stock Status: 989 in stock

£11.45 excl tax

FOSROC MS60 SEALANT GREY 380CC

Fosroc Nitoseal MS60 is a one part, low modulus sealant based on hybrid silyl modified polyether technology.
It is suitable for sealing joints in concrete, brickwork, blockwork, perimeter sealing around doors and windows, and non-trafficked floor joints.

Unit Size: 380ml

Stock Status: Out of stock

£11.34 excl tax

FOSROC MULSEAL DP 25LTR

Fosroc Mulseal DP is a single part bitumen latex emulsion, applied by brush or squeegee.
The incorporation of rubber latex imparts elasticity to the dried coating.
Mulseal DP is suitable for use on most building materials such as concrete, brickwork, metals and stone.

Unit Size: 25ltr

Stock Status: Out of stock

£142.68 excl tax

FOSROC RENDEROC LA55 25kgs Bag

Payment options