Flexprime PS100 is a solvent-based two component epoxy adhesion promoter and substrate primer. It is formulated to enhance the adhesion on porous and nonporous substrates.
Flexseal PU440 is a one component non sag polyurethane sealant which cures by reacting with air humidity to form a high modulus, tough & highly elastic sealant.
Unit Size: Each Suitable for vertical and horizontal joints.
A one part, high modulus sealant based on hybrid silyl modified polyether technology.
It has a rapid rate of cure and forms a tough elastomer capable of supporting heavy wheel loads.
It may be applied between 6mm and 20mm wide, for internal trafficked flush joints and up to 40mm wide, for non-tracked/recessed tracked joints.
Unit Size: 600ml
A high modulus, one component, PU sealant and adhesive which adheres strongly to most substrates and provides mechanical resistance.
Unit Size: 600ml cartridge
A one part, low modulus sealant based on hybrid silyl modified polyether technology.
It is suitable for sealing joints in concrete, brickwork, blockwork, perimeter sealing around doors and windows, and non-trafficked floor joints.
Unit Size: 380ml
A high modulus, one compenent, PU sealant and adhesive which adheres strongly to most substrates and provides mechanical resistance.
Unit Size: 300ml cartridge
A high modulus, one component, PU sealant and adhesive which adheres strongly to most substrates and provides mechanical resistance.
Unit Size: 600ml cartridge