Personal menu

Manufacturer:

FOSROC NITOBOND AR 5LTR

A modified acrylic emulsion which is specially designed for use as a bonding aid, curing agent and gauging liquid for cementitious systems. It is resistant to hydrolysis and can therefore be used for external application. Unit Size: 5ltr

Availability: 74 in stock

Depot Stock

Bury St Edmunds Depot	20 in stock
Kent Depot	8 in stock
Midlands Depot	13 in stock
Sheffield Depot	10 in stock
West London Depot	23 in stock

£116.86 excl tax

Sold in units of: BOTTLE

Qty:

i h

Overview
Specifications
Downloads
Product Disclaimer
Contact Us

Uses:
◇ Nitobond AR is recommended as a curing membrane for Renderoc repair mortars.
◇ It may also be used as an economical dust proofer and surface sealer for non-traffiked cementitious surfaces.

Advantages:
◇ Single component gauged as required - no site mixing
◇ Easy to use - ready to use straight from the container
◇ Cost effective - economical in use
◇ Curing aid - Nitobond AR can be used as a curing membrane for Renderoc systems.
◇ Simply brush onto concrete as a primer
◇ Provides excellent bond to concrete, masonry, stonework, plaster and block-board
◇ Improves tensile and compressive properties. Allows thin section applications.
◇ Compatible with all common hydraulic cements.

Products specifications

Shelf Life	Store in dry conditions at 5°-25°C. Shelf life is 12 months if stored in dry conditions. Protect from frost.

Technical Datasheet

The product image(s) shown are for illustration purposes only and may not be an exact representation of the product.

The recommendations relating to the application and end-use of the products mentioned are based on our current knowledge and experience of the products when properly stored, handled and applied under normal conditions. All product specification, information and data made available on the website is subject to change. All information presented is believed to be accurate and reliable, but is given without guarantee, warranty or responsibility of any kind.

Your name *

Your email *

Subject: *

Enquiry *

Customers who bought this item also bought

FOSROC RENDEROC LA60 25kgs Bag

A high performance free flowing low alkali micro concrete conforming to the requirements of Highways England Specfication for Highways Works and EN1504-3 Structural and Non-structural concrete Class R4. Renderoc LA60 can typically be applied in thicknesses between 25 and 300mm whilst minimising risk of thermal cracking. Unit Size: 25kg bag

Stock Status: 116 in stock

£47.14 excl tax

FOSROC RENDEROC S CONCRETE REPAIR 2

A high strength, polymer modified, cementitious repair material which has been specifically engineered for vertical or horizontal use. It can be applied up to 10mm thickness in vertical locations and up to 100mm thickness in horizontal locations in a single application. Unit Size: 25kg

Stock Status: 509 in stock

£41.85 excl tax

FOSROC RENDEROC HBS (25 KILO)

A high strength, high build concrete repair mortar which has been specifically engineered for vertical and overhead repair work. It can be applied in sections up to 40mm thickness in vertical locations and up to 30mm thickness in overhead locations in a single application without the use of formwork. Unit Size: 25kg

Stock Status: 82 in stock

£38.78 excl tax

Products from the Same Manufacturer

FOSROC CONBEXTRA GP GROUT 25 KILO B

Fosroc Conbextra GP Grout is a high-flow, nonshrink cementitious grout, conforming to the requirements of BS EN 1504-3 Class R4 and BS EN 1504-6: Anchoring of a reinforcing steel bar. Used for grouting gap thicknesses 10 to 75mm. Unit Size: 25kg

Stock Status: 2160 in stock

£11.51 excl tax

FOSROC GX GUN 600cc (FOR FOILED PRODUCTS - SAUSAGES)

(FOR FOILED PRODUCTS - SAUSAGES)

Stock Status: 50 in stock

£67.65 excl tax

FOSROC LOKFIX E35S 300ml CARTRIDGE

Fosroc Lokfix E35S is a two component polyester anchoring material, supplied in single component cartridges with a static mixer nozzle. When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates. Unit Size: 300ml

Stock Status: Out of stock

£276.20 excl tax

FOSROC LOKFIX E55S 300ml CARTRIDGE

Fosroc Lokfix E55S is a two component vinyl-ester anchoring material, supplied in single component cartridges with a static mixer nozzle. When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates. Unit Size: 300ml

Stock Status: Out of stock

£28.52 excl tax

FOSROC LOKFIX E75 APPLICATOR GUN

Applicator gun for Lokfix E75 Unit Size: Each

Stock Status: Out of stock

£60.97 excl tax

FOSROC LOKFIX E77 585ml CARTRIDGE (sold by cartridge)

A two-component epoxy anchoring material, supplied in 3:1 ratio side-by-side cartridges with a static mixer nozzle. When applied it sets and cures to firmly secure a variety of steel fixings into concrete and solid masonry substrates. Unit Size: 385ml

Stock Status: Out of stock

£30.89 excl tax

FOSROC LOKFIX S25 2.5Ltr BLUE LID

A two component polyester anchoring grout supplied in pre-measured quantities. The material cures quickly to give consistent, high performance anchorages. It is a pourable grade, with a 25 minute gel time at 20°c for use in vertical down holes where the hole is 8 to 40mm greater in diameter than the bar. Unit Size: 2.5ltr

Stock Status: Out of stock

£66.38 excl tax

FOSROC MS300 SEALANT 600cc

A one part, high modulus sealant based on hybrid silyl modified polyether technology. It has a rapid rate of cure and forms a tough elastomer capable of supporting heavy wheel loads. It may be applied between 6mm and 20mm wide, for internal trafficked flush joints and up to 40mm wide, for non-tracked/recessed tracked joints. Unit Size: 600ml

Stock Status: 856 in stock

£11.89 excl tax

FOSROC MS60 SEALANT GREY 380CC

A one part, low modulus sealant based on hybrid silyl modified polyether technology. It is suitable for sealing joints in concrete, brickwork, blockwork, perimeter sealing around doors and windows, and non-trafficked floor joints. Unit Size: 380ml

Stock Status: Out of stock

£11.34 excl tax

FOSROC MULSEAL DP 25LTR

A single part bitumen latex emulsion, applied by brush or squeegee. The incorporation of rubber latex imparts elasticity to the dried coating. Mulseal DP is suitable for use on most building materials such as concrete, brickwork, metals and stone. Unit Size: 25ltr

Stock Status: Out of stock

£148.09 excl tax

FOSROC NITOBOND AR 5LTR

Payment options