Search
Order hotline: 0844 800 2464
Email: sales@preconproducts.co.uk
- Categories
- Home Page
- My Account
- Concrete Accessories
- Ground & Slab Accessories
- Concrete Chemicals
- Formwork & Accessories
- Reinforcement
- Concrete Repair & Grout
-
Waterproofing
- Gas Protection
- Safety & Protection Products
- Flooring
- Ground Stabilisation
- Tools and Fixings
- Brickwork
- Expansion
- Sealing and Bonding
- News & Resources
Fosroc Concrete Repair
FOSROC CONBEXTRA GP GROUT 25 KILO B
Fosroc Conbextra GP Grout is a high-flow, nonshrink cementitious grout, conforming to the requirements of BS EN 1504-3 Class R4 and BS EN 1504-6: Anchoring of a reinforcing steel bar.
Used for grouting gap thicknesses 10 to 75mm.
Unit Size: 25kg
Stock Status:
720 in stock
£11.51 excl tax
FOSROC LOKFIX E35S 300ml CARTRIDGE
Fosroc Lokfix E35S is a two component polyester anchoring material, supplied in single component cartridges with a static mixer nozzle.
When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates.
Unit Size: 300ml
Stock Status:
Out of stock
£276.20 excl tax
FOSROC LOKFIX E55S 300ml CARTRIDGE
Fosroc Lokfix E55S is a two component vinyl-ester anchoring material, supplied in single component cartridges with a static mixer nozzle.
When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates.
Unit Size: 300ml
Stock Status:
Out of stock
£293.15 excl tax
FOSROC LOKFIX E75 APPLICATOR GUN
Applicator gun for Lokfix E75
Unit Size: Each
Stock Status:
Out of stock
£58.74 excl tax
FOSROC LOKFIX E77 585ml CARTRIDGE (sold by cartridge)
A two-component epoxy anchoring material, supplied in 3:1 ratio side-by-side cartridges with a static mixer nozzle.
When applied it sets and cures to firmly secure a variety of steel fixings into concrete and solid masonry substrates.
Unit Size: 385ml
Stock Status:
Out of stock
£30.89 excl tax
FOSROC LOKFIX S25 2.5Ltr BLUE LID
A two component polyester anchoring grout supplied in pre-measured quantities.
The material cures quickly to give consistent, high performance anchorages.
It is a pourable grade, with a 25 minute gel time at 20°c for use in vertical down holes where the hole is 8 to 40mm greater in diameter than the bar.
Unit Size: 2.5ltr
Stock Status:
Out of stock
£66.38 excl tax
FOSROC NITOBOND AR 5LTR
A modified acrylic emulsion which is specially designed for use as a bonding aid, curing agent and gauging liquid for cementitious systems.
It is resistant to hydrolysis and can therefore be used for external application.
Unit Size: 5ltr
Stock Status:
67 in stock
£112.58 excl tax
FOSROC NITOBOND EP 4.5KG (2 PART)
A 100% solids solvent-free epoxy resin containing pigments and fine filler.
It is supplied as a two-part material in pre-weighed quantities ready for on-site mixing and use.
Coloured components, white base and green hardener, provide visual evidence that adequate mixing is achieved.
Unit Size: 4.5kg
Stock Status:
48 in stock
£161.11 excl tax
FOSROC NITOBOND EP STD 2.5KG 2PART
A 100% solids solvent-free epoxy resin containing pigments and fine filler.
It is supplied as a two-part material in pre-weighed quantities ready for on-site mixing and use.
Coloured components, white base and green hardener, provide visual evidence that adequate mixing is achieved.
Unit Size: 2.5kg
Stock Status:
23 in stock
£88.86 excl tax
FOSROC NITOBOND HAR 5 LTR
A modified acrylic emulsion specially designed for use as a bonding aid and gauging liquid for cementitious systems.
Unit Size: 5 ltr
Stock Status:
47 in stock
£115.34 excl tax
FOSROC NITOCOTE CM210 GREY (2 Part Product)
A flexible two-component polymer cementitious coating, used for waterproofing water retaining structures and water excluding structures.
Unit Size: 18.2kg bag powder component, 5kg liquid polymer component
Available in grey and white.
Stock Status:
190 in stock
£132.11 excl tax
FOSROC NITOCOTE CM210 WHITE (2 Part Product)
A flexible two-component polymer cementitious coating, used for waterproofing water retaining structures and water excluding structures.
Unit Size: 18.2kg bag powder component, 5kg liquid polymer component
Available in grey and white.
Stock Status:
39 in stock
£132.11 excl tax
FOSROC NITOCOTE EP405 BLUE
A high build epoxy coating, non-toxic for application to damp surfaces.
Unit Size: 2.5kg packs
Stock Status:
46 in stock
£141.48 excl tax
FOSROC NITOCOTE EP405 WHITE
A high build epoxy coating, non-toxic for application to damp surfaces.
Unit Size: 2.5kg packs
Stock Status:
28 in stock
£141.48 excl tax
FOSROC NITOFIL LV (2x1.5 ltr Pack)
A low viscosity system for the injection of cracks between 0.3mm and 9mm wide in concrete and masonry, where both sides of the crack can be sealed to prevent resin drainage.
Unit Size: 3 ltr pack (2 x 1.5ltr units each consisting of base & hardener)
Stock Status:
53 in stock
£178.35 excl tax
FOSROC NITOFILL TH ( 1 Ltr) 2 Parts
A thixotropic epoxy resin injection grout developed for the injection of cracks 0-.5 to 9mm wide in concrete and masonry, and has been specially formulated to minimise the drainage of resin from cracks which are incompletely sealed.
Unit Size: 1 ltr pack
Stock Status:
Out of stock
£124.03 excl tax
FOSROC NITOKIT ACCESSORY PACK
Fosroc Nitokit Accessory pack contains an injection gun, plastic bucket, goggles and 5.5L nitokit surface sealant.
Unit Size: pack
Stock Status:
7 in stock
£209.88 excl tax
FOSROC NITOKIT LV (INCLUDES BELOW) (12 CARTRIDGES, 30 NIPPLES, 6 HOSES, 4 AIR RELEASE PINS)
A low viscosity system suitable for surface cracks down to 0.2mm and internal cracks to 0.1mm. Self contained pack containing cartridges, nipples, hoses and air release pins.
Unit Size: pack
Stock Status:
5 in stock
£694.57 excl tax
FOSROC NITOKIT SURFACE SEALER 5.5L
A two part filled epoxy used to seal over the cracks in structural materials such as concrete.
Unit Size: 5.5ltr
Stock Status:
10 in stock
£101.82 excl tax
FOSROC NITOKIT TH BASIC PACK
A thixotropic system which can be injected into open ended cracks. Depth and quantity of resin need to be controlled and minimum crack width is 2mm.
Unit Size: pack
Stock Status:
Out of stock
£694.57 excl tax
FOSROC NITOMORTAR HB (INDUSTRIAL)
Fosroc Nitomortar HB high build epoxy mortar is based on a high performance solvent-free epoxy resin system.
The special lightweight filler is specifically designed to give excellent 'hanging' properties for vertical and overhead work.
Unit Size: 9.3kg pack
Stock Status:
Out of stock
£214.22 excl tax
FOSROC NITOMORTAR PE 14 KILO PACK
A resin jointing and repair compound, based on a polyester resin system, for general purpose use.
Unit Size: 14kg
Stock Status:
10 in stock
£104.74 excl tax
FOSROC NITOMORTAR PE RESIN 2.7kg
A resin jointing and repair compound, based on a polyester resin system, for general purpose use.
Unit Size: 2.7kg can only
Stock Status:
Out of stock
£133.12 excl tax
.png)
.png)
Payment options
