Personal menu

Manufacturer:

GRACE B1 PRIMER 5 LITRE CAN

GCP Bituthene Primer B1 is a quick drying all temperature primer to enable same hour application of Bituthene membranes. Unit Size: 5 ltr can

Availability: 23 in stock

Depot Stock

Bury St Edmunds Depot	9 in stock
Kent Depot	2 in stock
Midlands Depot	5 in stock
Sheffield Depot	3 in stock
West London Depot	4 in stock

£39.48 excl tax

Qty:

i h

Overview
Specifications
Product Disclaimer
Downloads
Contact Us

Uses:
◇ Bituthene Primer B1 is a solvent based bituminous primer used to prepare substrates where Bituthene GP membranes are to be applied.
◇ Bituthene Primer B1 is used to prime dry concrete, dry wood and dry metal surfaces to which Bituthene membranes are to be applied.
◇ Bituthene B1 primer can be used at +5°c and above.

Advantages:
◇ Ideal for winter use
◇ Rapid drying
◇ High coverage - low cost per square meter
◇ Specially formulated to provide enhanced adhesion with Bituthene GP membrane
◇ Application at temperatures of +5°c and above

Products specifications

Unit Sizes Available	5 ltr can & 25 ltr can

The product image(s) shown are for illustration purposes only and may not be an exact representation of the product.

The recommendations relating to the application and end-use of the products mentioned are based on our current knowledge and experience of the products when properly stored, handled and applied under normal conditions. All product specification, information and data made available on the website is subject to change. All information presented is believed to be accurate and reliable, but is given without guarantee, warranty or responsibility of any kind.

Technical Datasheet

Your name *

Your email *

Subject: *

Enquiry *

Customers who bought this item also bought

FOSROC RENDEROC GP 25KG BAGS

Fosroc Renderoc GP is a general purpose cementitious repair mortar which has been specifically engineered for vertical repair work.

It can be applied in sections up to 70mm thickness in vertical locations and up to 60mm thickness in overhead locations in a single application and without the use of formwork.

Unit Size: 25kg bag

Stock Status: 297 in stock

£37.37 excl tax

FOSROC RENDEROC LA55 25kgs Bag

Fosroc Renderoc LA55 ia high performance, free flowing low alkali micro concrete conforming to the requirements of BS EN 1504-3 Class R4.

Renderoc LA55 is designed for large volume repairs typically in excess of 25mm deep.

Unit Size: 25kg bags

Stock Status: 302 in stock

£37.77 excl tax

GRACE BITUTHENE 4000 MEMBRANE 1x20

GCP Bituthene 4000 is a self-adhesive, cross-laminated HDPE waterproofing membrane with enhanced bonding characteristics. Unit Size: 1m x 20m roll

Stock Status: 113 in stock

£187.75 excl tax

GRACE BITUTHENE LM LIQUID MEMBRANE

GCP Bituthene LM is a two component elastomeric liquid applied detailing compound for use with GCP Applied Technologies waterproof membranes. Unit Size: 5.7 litre pack (Parts A & B)

Stock Status: 231 in stock

£171.74 excl tax

Products from the Same Manufacturer

GRACE 550MI KIT (8 X 5M=40M)

GCP Adcor 550MI kit is a double protection system for construction joints using 2-in-1 pre-applied, post injectable hydrophilic waterstop. Unit Size: Each box contains: Adcor 500MI 8 x 5m rolls (40m) Reinforced PVC tube 4m + 16 caps Blue Trumpets 16 pieces Adcor 550MI clips 175 pieces PVC tube clips 16 pieces

Stock Status: Out of stock

£2,022.28 excl tax

GRACE 6mm SERVIPAK 1.5mx1m

GCP Servipak protection boards are robust, bitumen impregnated boards, designed for permanent protection of Servidek. The boards are laid into "wet" Servidek liquid membrane to provide protection against damage from hot and cold applied finishes. Unit Size: 6mm x 1m 1.5m (1.5sqm)

Stock Status: Out of stock

£30.34 excl tax

GRACE ADCORE 500S WATERSTOP 5m ROL

GCP Adcor 500S is a thick sectioned, conformable, hydro-expansive waterstop for preventing water entry through joints in concrete substructures. Unit Size: 25mm x 20mm waterstop strip, supplied in 5m rolls

Stock Status: 552 in stock

£75.11 excl tax

GRACE ADCORE 500T WATERSTOP 5m ROL

GCP Adcor 500T is a thick sectioned, conformable, hydro-expansive waterstop for preventing saline and brackish water entry throughjoints in concrete substructures. Unit Size: 25mm x 20mm waterstop strip, supplied in 5m rolls

Stock Status: 1 in stock

£99.00 excl tax

GRACE ADCORE ADHESIVE 310cc CARTRIDGE

GCP Adcor Adhesive is for gluing Adcor 500S & Adcor 500T to smooth concrete, steel and plastic substrates. Supplied in cartridges for gun applications. Unit Size: 310ml cartridge

Stock Status: 770 in stock

£26.54 excl tax

GRACE ADCORE MASTIC 300cc CARTRIDGE

GCP Adcore Mastic is a hydrophilic mastic for use as a bedding bead on irregular concrete surfaces prior to the application of Adcor 500S or Adcor 500T. Unit Size: 310ml cartridge

Stock Status: 267 in stock

£61.20 excl tax

GRACE AEROFIL 1 10mmX2mX0.8m

GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades. Unit Size: 10mm x 0.8m x 2m (1.6m²)

Stock Status: 61 in stock

£26.68 excl tax

GRACE AEROFIL 1 20mmX2mX0.8m

GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades. Unit Size: 20mm x 0.8m x 2m (1.6m²)

Stock Status: 179 in stock

£51.69 excl tax

GRACE AEROFIL 1 25mmX2mX0.8m

GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades. Unit Size: 25mm x 0.8m x 2m (1.6m²)

Stock Status: 138 in stock

£63.86 excl tax

GRACE AEROFIL 2 10mmX2mX0.8m

GCP Aerofil 2 is a high density, compressible closed cell, polyethylene filler for movement joints in civil/structural works and water retaining structures Unit Size: 10mm x 0.8m x 2m (1.6m²)

Stock Status: 239 in stock

£44.71 excl tax

GRACE B1 PRIMER 5 LITRE CAN

Payment options