GCP Adcor 550MI kit is a double protection system for construction joints using 2-in-1 pre-applied, post injectable hydrophilic waterstop.
Unit Size:
Each box contains:
Adcor 500MI 8 x 5m rolls (40m)
Reinforced PVC tube 4m + 16 caps
Blue Trumpets 16 pieces
Adcor 550MI clips 175 pieces
PVC tube clips 16 pieces
GCP Servipak protection boards are robust, bitumen impregnated boards, designed for permanent protection of Servidek.
The boards are laid into "wet" Servidek liquid membrane to provide protection against damage from hot and cold applied finishes.
Unit Size: 6mm x 1m 1.5m (1.5sqm)
GCP Adcor 500S is a thick sectioned, conformable, hydro-expansive waterstop for preventing water entry through joints in concrete substructures.
Unit Size: 25mm x 20mm waterstop strip, supplied in 5m rolls
GCP Adcor 500T is a thick sectioned, conformable, hydro-expansive waterstop for preventing saline and brackish water entry throughjoints in concrete substructures.
Unit Size: 25mm x 20mm waterstop strip, supplied in 5m rolls
GCP Adcor Adhesive is for gluing Adcor 500S & Adcor 500T to smooth concrete, steel and plastic substrates.
Supplied in cartridges for gun applications.
Unit Size: 310ml cartridge
GCP Adcore Mastic is a hydrophilic mastic for use as a bedding bead on irregular concrete surfaces prior to the application of Adcor 500S or Adcor 500T.
Unit Size: 310ml cartridge
GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades.
Unit Size: 10mm x 0.8m x 2m (1.6m²)
GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades.
Unit Size: 20mm x 0.8m x 2m (1.6m²)
GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades.
Unit Size: 25mm x 0.8m x 2m (1.6m²)
GCP Aerofil 2 is a high density, compressible closed cell, polyethylene filler for movement joints in civil/structural works and water retaining structures
Unit Size: 10mm x 0.8m x 2m (1.6m²)
GCP Aerofil 2 is a high density, compressible closed cell, polyethylene filler for movement joints in civil/structural works and water retaining structures
Unit Size: 20mm x 0.8m x 2m (1.6m²)
GCP Aerofil 2 is a high density, compressible closed cell, polyethylene filler for movement joints in civil/structural works and water retaining structures
Unit Size: 25mm x 0.8m x 2m (1.6m²)
GCP Aerofil 2 is a high density, compressible closed cell, polyethylene filler for movement joints in civil/structural works and water retaining structures
Unit Size: 50mm x 0.8m x 2m (1.6m²)
GCP Bentorub MS Fixer is a 1 component, caulk applied elastic MS-polymer adhesive.
MS Fixer cures into an elastic compound with very good adhesion to most construction materials.
MS Fixer is specially developed as adhesive for the Colflex range of EPDM membranes.
Unit Size: 400cm³ sausages
GCP Betec 350 is a single component cementitious compound which is polymer modified and fibre reinforced. It is a rapid setting, high strength, waterproof compound used to seal tieholes that are created by formwork tie bars.
Unit Size: 8kg
GCP Betec Flex is a two component flexible crack bridging cement based coating designed for the waterproofing of new and existing structures such as basements, elevator pits, concrete tanks, reservoirs and planter boxes.
Unit Size:
A Component: 9kg plastic pails
B Component: 23kg bags
GCP Betec Flex is a two component flexible crack bridging cement based coating designed for the waterproofing of new and existing structures such as basements, elevator pits, concrete tanks, reservoirs and planter boxes.
Unit Size:
A Component: 9kg plastic pails
B Component: 23kg bags
GCP Betec NSM is a polymer-modified, fibre-reinforced, cementitious mortar for repairing and restoring concrete and masonry surfaces.
The incorporation of plastic fibres minimises the risk of shrinkage cracking and the polymers ensure density and durability in the hardened mortar.
Unit Size: 25kg
GCP Betec NSM is a polymer-modified, fibre-reinforced, cementitious mortar for repairing and restoring concrete and masonry surfaces.
The incorporation of plastic fibres minimises the risk of shrinkage cracking and the polymers ensure density and durability in the hardened mortar.
Unit Size: 25kg