Personal menu

Manufacturer:

GRACE BITUTHENE LM LIQUID MEMBRANE

GCP Bituthene LM is a two component elastomeric liquid applied detailing compound for use with GCP Applied Technologies waterproof membranes. Unit Size: 5.7 litre pack (Parts A & B)

Availability: 53 in stock

Depot Stock

Bury St Edmunds Depot	15 in stock
Kent Depot	2 in stock
Midlands Depot	19 in stock
Sheffield Depot	2 in stock
West London Depot	15 in stock

£229.96 excl tax

Qty:

i h

Overview
Specifications
Product Disclaimer
Downloads
Contact Us

Uses:
◇ Pile head terminations
◇ Terminations into DPC
◇ Pipe and rod penetrations
◇ Membrane continuity through masonry
◇ Internal and external corners

Advantages:
◇ Liquid applied - conforms to irregular profiles
◇ Waterproof - resistant to water vapour and water pressure
◇ Tough rubber-like - flexible and damage resistant
◇ Seamless - joint free membrane
◇ Chemical cure - The two parts of Bituthene LM (E) liquid membrane are mixed on site and troweled on to provide a simple and quick waterproofing and detailing aid in conjunction with Bituthene and Preprufe sheet membrane waterproofing systems.
◇ Cold applied - no hazardous flame required
◇ Preprufe & Bituthene membrane compatible - complements both waterproofing systems

Products specifications

Shelf Life	12 months

The product image(s) shown are for illustration purposes only and may not be an exact representation of the product.

The recommendations relating to the application and end-use of the products mentioned are based on our current knowledge and experience of the products when properly stored, handled and applied under normal conditions. All product specification, information and data made available on the website is subject to change. All information presented is believed to be accurate and reliable, but is given without guarantee, warranty or responsibility of any kind.

Technical Datasheet

Your name *

Your email *

Subject: *

Enquiry *

Customers who bought this item also bought

GRACE ADCORE 500S WATERSTOP 5m ROL

GCP Adcor 500S is a thick sectioned, conformable, hydro-expansive waterstop for preventing water entry through joints in concrete substructures. Unit Size: 25mm x 20mm waterstop strip, supplied in 5m rolls

Stock Status: 401 in stock

£91.43 excl tax

GRACE BITUTHENE 4000 MEMBRANE 1x20

GCP Bituthene 4000 is a self-adhesive, cross-laminated HDPE waterproofing membrane with enhanced bonding characteristics. Unit Size: 1m x 20m roll

Stock Status: 38 in stock

£287.62 excl tax

GRACE PREPRUFE 800PA LT 35x1.2m

GCP Preprufe 800PA LT is an advanced, self-adhesive Preprufe Membrane for protection of below ground structures. Preprufe 800PA Low Temperature (LT) Membrane for low temperature applications when surface and ambient temperatures are between -5°C and 20°C. Unit Size: 1.2m x 35m roll

Stock Status: 21 in stock

£943.73 excl tax

GRACE S2 PRIMER 5 LITRE CAN

GCP Bituthene Primer S2 is a rubber-based primer in solvent, specially formulated to provide good initial adhesion, for use with the Bituthene range of cold applied, self adhesive waterproof membranes. Unit Size: 5 ltr can

Stock Status: 14 in stock

£72.11 excl tax

Products from the Same Manufacturer

AQUATEK PLUG 10 KILO (was betec plug 10)

GCP Betec Plug is a quick setting, cementitious, waterproof plugging compound for stopping flowing/seeping water entry into sub-structures. Unit Size: 10kg

Stock Status: Out of stock

£83.20 excl tax

GRACE 550MI KIT (8 X 5M=40M)

GCP Adcor 550MI kit is a double protection system for construction joints using 2-in-1 pre-applied, post injectable hydrophilic waterstop. Unit Size: Each box contains: Adcor 500MI 8 x 5m rolls (40m) Reinforced PVC tube 4m + 16 caps Blue Trumpets 16 pieces Adcor 550MI clips 175 pieces PVC tube clips 16 pieces

Stock Status: Out of stock

£2,461.67 excl tax

GRACE 6mm SERVIPAK 1.5mx1m

GCP Servipak protection boards are robust, bitumen impregnated boards, designed for permanent protection of Servidek. The boards are laid into "wet" Servidek liquid membrane to provide protection against damage from hot and cold applied finishes. Unit Size: 6mm x 1m 1.5m (1.5sqm)

Stock Status: Out of stock

£30.34 excl tax

GRACE ADCORE 500S WATERSTOP 5m ROL

Stock Status: 401 in stock

£91.43 excl tax

GRACE ADCORE 500T WATERSTOP 5m ROL

GCP Adcor 500T is a thick sectioned, conformable, hydro-expansive waterstop for preventing saline and brackish water entry throughjoints in concrete substructures. Unit Size: 25mm x 20mm waterstop strip, supplied in 5m rolls

Stock Status: Out of stock

£120.50 excl tax

GRACE ADCORE ADHESIVE 310cc CARTRIDGE

GCP Adcor Adhesive is for gluing Adcor 500S & Adcor 500T to smooth concrete, steel and plastic substrates. Supplied in cartridges for gun applications. Unit Size: 310ml cartridge

Stock Status: 429 in stock

£32.31 excl tax

GRACE ADCORE MASTIC 300cc CARTRIDGE

GCP Adcore Mastic is a hydrophilic mastic for use as a bedding bead on irregular concrete surfaces prior to the application of Adcor 500S or Adcor 500T. Unit Size: 310ml cartridge

Stock Status: 199 in stock

£74.50 excl tax

GRACE AEROFIL 1 10mmX2mX0.8m

GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades. Unit Size: 10mm x 0.8m x 2m (1.6m²)

Stock Status: 36 in stock

£33.38 excl tax

GRACE AEROFIL 1 20mmX2mX0.8m

GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades. Unit Size: 20mm x 0.8m x 2m (1.6m²)

Stock Status: 90 in stock

£64.44 excl tax

GRACE AEROFIL 1 25mmX2mX0.8m

GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades. Unit Size: 25mm x 0.8m x 2m (1.6m²)

Stock Status: 44 in stock

£79.13 excl tax

GRACE BITUTHENE LM LIQUID MEMBRANE

Payment options