Personal menu

Manufacturer:

GRACE BITUTHENE 4000 MEMBRANE 1x20

GCP Bituthene 4000 is a self-adhesive, cross-laminated HDPE waterproofing membrane with enhanced bonding characteristics. Unit Size: 1m x 20m roll

Availability: 109 in stock

Depot Stock

Bury St Edmunds Depot	24 in stock
Kent Depot	15 in stock
Midlands Depot	20 in stock
Sheffield Depot	29 in stock
West London Depot	21 in stock

£187.75 excl tax

Qty:

i h

Overview
Specifications
Product Disclaimer
Downloads
Contact Us

Advantages:

◇ Cold-applied - fast, safe and simple application to substrates especially at low temperatures and saves application time.
◇ Suitable for application to "green" concrete - reduces programme schedules
◇ Moisture tolerant primer system - allows application in damp or marginal weather conditions
◇ Wide application temperature change - excellent bond to self and substrate from -5°c to +35°c
◇ Twin seal laps - adhesive and film sealing provides enhanced bond and additional security
◇ Cross-laminated high-density polyethylene carrier film - provides high tear strength, puncture and impact resistance
◇ Pre-marked overlaps - ensures quality of the overlaps and saves application time
◇ Gas resistance - contributes to methane, carbon dioxide and radon gas protection according to BS 8485, BRE Reports 211 (radon) and 212 (methane and carbon dioxide).

Products specifications

Coverage	8-10m² per litre depending on surface porosity
Shelf Life	Store in original packaging in dry conditions between 5°C & 30°C

The product image(s) shown are for illustration purposes only and may not be an exact representation of the product.

The recommendations relating to the application and end-use of the products mentioned are based on our current knowledge and experience of the products when properly stored, handled and applied under normal conditions. All product specification, information and data made available on the website is subject to change. All information presented is believed to be accurate and reliable, but is given without guarantee, warranty or responsibility of any kind.

Technical Datasheet

Your name *

Your email *

Subject: *

Enquiry *

Customers who bought this item also bought

GRACE B1 PRIMER 5 LITRE CAN

GCP Bituthene Primer B1 is a quick drying all temperature primer to enable same hour application of Bituthene membranes. Unit Size: 5 ltr can

Stock Status: 23 in stock

£39.48 excl tax

SOFT BRISTLE BROOM 300mm WIDE

A soft bristle broom for indoor and outdoor use, ideal for tight areas. Unit Size: Each

Stock Status: 37 in stock

£3.00 excl tax

Products from the Same Manufacturer

GRACE 550MI KIT (8 X 5M=40M)

GCP Adcor 550MI kit is a double protection system for construction joints using 2-in-1 pre-applied, post injectable hydrophilic waterstop. Unit Size: Each box contains: Adcor 500MI 8 x 5m rolls (40m) Reinforced PVC tube 4m + 16 caps Blue Trumpets 16 pieces Adcor 550MI clips 175 pieces PVC tube clips 16 pieces

Stock Status: Out of stock

£2,022.28 excl tax

GRACE 6mm SERVIPAK 1.5mx1m

GCP Servipak protection boards are robust, bitumen impregnated boards, designed for permanent protection of Servidek. The boards are laid into "wet" Servidek liquid membrane to provide protection against damage from hot and cold applied finishes. Unit Size: 6mm x 1m 1.5m (1.5sqm)

Stock Status: Out of stock

£30.34 excl tax

GRACE ADCORE 500S WATERSTOP 5m ROL

GCP Adcor 500S is a thick sectioned, conformable, hydro-expansive waterstop for preventing water entry through joints in concrete substructures. Unit Size: 25mm x 20mm waterstop strip, supplied in 5m rolls

Stock Status: 557 in stock

£75.11 excl tax

GRACE ADCORE 500T WATERSTOP 5m ROL

GCP Adcor 500T is a thick sectioned, conformable, hydro-expansive waterstop for preventing saline and brackish water entry throughjoints in concrete substructures. Unit Size: 25mm x 20mm waterstop strip, supplied in 5m rolls

Stock Status: 1 in stock

£99.00 excl tax

GRACE ADCORE ADHESIVE 310cc CARTRIDGE

GCP Adcor Adhesive is for gluing Adcor 500S & Adcor 500T to smooth concrete, steel and plastic substrates. Supplied in cartridges for gun applications. Unit Size: 310ml cartridge

Stock Status: 770 in stock

£26.54 excl tax

GRACE ADCORE MASTIC 300cc CARTRIDGE

GCP Adcore Mastic is a hydrophilic mastic for use as a bedding bead on irregular concrete surfaces prior to the application of Adcor 500S or Adcor 500T. Unit Size: 310ml cartridge

Stock Status: 231 in stock

£61.20 excl tax

GRACE AEROFIL 1 10mmX2mX0.8m

GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades. Unit Size: 10mm x 0.8m x 2m (1.6m²)

Stock Status: 61 in stock

£26.68 excl tax

GRACE AEROFIL 1 20mmX2mX0.8m

GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades. Unit Size: 20mm x 0.8m x 2m (1.6m²)

Stock Status: 176 in stock

£51.69 excl tax

GRACE AEROFIL 1 25mmX2mX0.8m

GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades. Unit Size: 25mm x 0.8m x 2m (1.6m²)

Stock Status: 138 in stock

£63.86 excl tax

GRACE AEROFIL 2 10mmX2mX0.8m

GCP Aerofil 2 is a high density, compressible closed cell, polyethylene filler for movement joints in civil/structural works and water retaining structures Unit Size: 10mm x 0.8m x 2m (1.6m²)

Stock Status: 239 in stock

£44.71 excl tax

GRACE BITUTHENE 4000 MEMBRANE 1x20

Payment options