Manufacturer:

GRACE S2 PRIMER 25 LITRE CAN

GCP Bituthene Primer S2 is a rubber-based primer in solvent, specially formulated to provide good initial adhesion, for use with the Bituthene range of cold applied, self adhesive waterproof membranes. Unit Size: 25 ltr can

Availability: 19 in stock

Depot Stock

Bury St Edmunds Depot	6 in stock
Kent Depot	2 in stock
Midlands Depot	4 in stock
Sheffield Depot	2 in stock
West London Depot	5 in stock

£243.71 excl tax

Qty:

i h

Overview
Specifications
Product Disclaimer
Downloads
Contact Us

Uses:
◇ Used to prime "green" concrete or damp to touch substrates, as well as masonry or wood surfaces, on which Bituthene 8000/8000S and 4000/4000S membranes will be applied.
◇ Primer S2 can be used on vertical and horizontal applications at -5°C or above

Advantages:
◇ All temperature application above -5°C
◇ Green and damp concrete tolerant
◇ Quick drying for fast membrane application
◇ Rubberised formulation for high adhesion
◇ Pink colour to ensure full coverage, aid identification and to avoid use of non-reccommended primer
◇ Compatible with Bituthene 4000 and 8000 series

Products specifications

Unit Sizes Available	5 ltr can or 25 ltr can

The product image(s) shown are for illustration purposes only and may not be an exact representation of the product.

The recommendations relating to the application and end-use of the products mentioned are based on our current knowledge and experience of the products when properly stored, handled and applied under normal conditions. All product specification, information and data made available on the website is subject to change. All information presented is believed to be accurate and reliable, but is given without guarantee, warranty or responsibility of any kind.

Technical Datasheet

Your name *

Your email *

Subject: *

Enquiry *

Products from the Same Manufacturer

GRACE 550MI KIT (8 X 5M=40M)

GCP Adcor 550MI kit is a double protection system for construction joints using 2-in-1 pre-applied, post injectable hydrophilic waterstop. Unit Size: Each box contains: Adcor 500MI 8 x 5m rolls (40m) Reinforced PVC tube 4m + 16 caps Blue Trumpets 16 pieces Adcor 550MI clips 175 pieces PVC tube clips 16 pieces

Stock Status: Out of stock

£2,022.28 excl tax

GRACE 6mm SERVIPAK 1.5mx1m

GCP Servipak protection boards are robust, bitumen impregnated boards, designed for permanent protection of Servidek. The boards are laid into "wet" Servidek liquid membrane to provide protection against damage from hot and cold applied finishes. Unit Size: 6mm x 1m 1.5m (1.5sqm)

Stock Status: Out of stock

£30.34 excl tax

GRACE ADCORE 500S WATERSTOP 5m ROL

GCP Adcor 500S is a thick sectioned, conformable, hydro-expansive waterstop for preventing water entry through joints in concrete substructures. Unit Size: 25mm x 20mm waterstop strip, supplied in 5m rolls

Stock Status: 666 in stock

£75.11 excl tax

GRACE ADCORE 500T WATERSTOP 5m ROL

GCP Adcor 500T is a thick sectioned, conformable, hydro-expansive waterstop for preventing saline and brackish water entry throughjoints in concrete substructures. Unit Size: 25mm x 20mm waterstop strip, supplied in 5m rolls

Stock Status: 1 in stock

£99.00 excl tax

GRACE ADCORE ADHESIVE 310cc CARTRIDGE

GCP Adcor Adhesive is for gluing Adcor 500S & Adcor 500T to smooth concrete, steel and plastic substrates. Supplied in cartridges for gun applications. Unit Size: 310ml cartridge

Stock Status: 996 in stock

£26.54 excl tax

GRACE ADCORE MASTIC 300cc CARTRIDGE

GCP Adcore Mastic is a hydrophilic mastic for use as a bedding bead on irregular concrete surfaces prior to the application of Adcor 500S or Adcor 500T. Unit Size: 310ml cartridge

Stock Status: 263 in stock

£61.20 excl tax

GRACE AEROFIL 1 10mmX2mX0.8m

GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades. Unit Size: 10mm x 0.8m x 2m (1.6m²)

Stock Status: 61 in stock

£26.68 excl tax

GRACE AEROFIL 1 20mmX2mX0.8m

GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades. Unit Size: 20mm x 0.8m x 2m (1.6m²)

Stock Status: 189 in stock

£51.69 excl tax

GRACE AEROFIL 1 25mmX2mX0.8m

GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades. Unit Size: 25mm x 0.8m x 2m (1.6m²)

Stock Status: 179 in stock

£63.86 excl tax

GRACE AEROFIL 2 10mmX2mX0.8m

GCP Aerofil 2 is a high density, compressible closed cell, polyethylene filler for movement joints in civil/structural works and water retaining structures Unit Size: 10mm x 0.8m x 2m (1.6m²)

Stock Status: 248 in stock

£44.71 excl tax

GRACE S2 PRIMER 25 LITRE CAN

Payment options