Search
Product Categories
    Menu Close
    Manufacturer:

    VISQUEEN AXIOM UNISEAL 15.6kg

    Visqueen Axiom UniSeal is a two component system both supplied in the same tin. The first component (Part A) is a bitumen-extended polyurethane fluid (15kg). The second component (Part B) is an accelerator hardener (0.6kg).

    Unit Size: 15.6kg
     
    Availability: 56 in stock
    Depot Stock
    Bury St Edmunds Depot 22 in stock
    Kent Depot 13 in stock
    Midlands Depot 10 in stock
    Sheffield Depot 8 in stock
    West London Depot 3 in stock
    £402.73 excl tax
    i h

    Uses:
    Visqueen Axiom UniSeal is specially formulated for waterproofing below ground structures.
    It is suitable for complex shapes, irregular profiles and angle fillets.
    It can be used to seal pipe penetrations and steel stanchions and around steel reinforcement.
    It can also be used on various surfaces including steel, timber, plywood, bitumen membranes, concrete and masonry.
    Visqueen Axiom UniSeal is a high performance liquid waterproofing membrane which meets the requirements of BS8102:2022 for Grades 1, 2 and 3, and is classified as a fully bonded Type A membrane.
    The product is not designed for use as a decorative finish and is not suitable for long periods of exposure to sunlight.


    Advantages:
    Agrement certifed - third party accreditation
    Type A Barrier Membrane (Tanking Membrane) - resistant to ground water in accordance with BS 8102:2022 Tough rubber like cure - perfect for detailing irregular profiles and penetrations
    Multiple applications - ideal for waterproofing blockwork and brickwork masonry substrates
    Unique curing properties - creates a fillet in just one pass, with no complicated build-ups
    Barrier properties - radon resistant

    Products specifications
    Shelf Life Visqueen Axiom UniSeal should be stored upright, undercover and in its original packaging. Store away from any sources of ignition in a well ventilated space at temperatures between 5ºC and 30ºC. To avoid the risk of spillage, always store and transport in a secure upright position. The unopened product has a minimum shelf life of 12 months. Once opened the product must be used within one hour. Care should be taken when handling the product in line with current manual handling regulations. Use in a well ventilated space away from any sources of ignition. Keep the container closed when not in use.
    Coverage Angle fllet coverage - in fllet applications the material should be at least 20mm thickness in the horizontal and vertical surfaces. Coverage is approximately 78 liner metres per 15.6kg tin. Render coat coverage - when used as a 2.5mm thick render coat (minimum thickness), coverage is approximately 6.24m²

    The product image(s) shown are for illustration purposes only and may not be an exact representation of the product.

    The recommendations relating to the application and end-use of the products mentioned are based on our current knowledge and experience of the products when properly stored, handled and applied under normal conditions. All product specification, information and data made available on the website is subject to change. All information presented is believed to be accurate and reliable, but is given without guarantee, warranty or responsibility of any kind.

    *
    *
    *
    *