Search
Order hotline: 0844 800 2464
Email: sales@preconproducts.co.uk
- Categories
- Home Page
- My Account
- Concrete Accessories
- Ground & Slab Accessories
- Concrete Chemicals
- Formwork & Accessories
- Reinforcement
- Concrete Repair & Grout
-
Waterproofing
- Gas Protection
- Safety & Protection Products
- Flooring
- Ground Stabilisation
- Tools and Fixings
- Brickwork
- Expansion
- Sealing and Bonding
- News & Resources
Products from the Same Manufacturer
FOSROC CONBEXTRA GP GROUT 25 KILO B
Fosroc Conbextra GP Grout is a high-flow, nonshrink cementitious grout, conforming to the requirements of BS EN 1504-3 Class R4 and BS EN 1504-6: Anchoring of a reinforcing steel bar.
Used for grouting gap thicknesses 10 to 75mm.
Unit Size: 25kg
Used for grouting gap thicknesses 10 to 75mm.
Unit Size: 25kg
Stock Status:
991 in stock
£11.51 excl tax
FOSROC GX GUN 600cc (FOR FOILED PRODUCTS - SAUSAGES)
(FOR FOILED PRODUCTS - SAUSAGES)
Stock Status:
44 in stock
£65.17 excl tax
FOSROC LOKFIX E35S 300ml CARTRIDGE
Fosroc Lokfix E35S is a two component polyester anchoring material, supplied in single component cartridges with a static mixer nozzle.
When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates.
Unit Size: 300ml
When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates.
Unit Size: 300ml
Stock Status:
Out of stock
£276.20 excl tax
FOSROC LOKFIX E55S 300ml CARTRIDGE
Fosroc Lokfix E55S is a two component vinyl-ester anchoring material, supplied in single component cartridges with a static mixer nozzle.
When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates.
Unit Size: 300ml
When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates.
Unit Size: 300ml
Stock Status:
Out of stock
£293.15 excl tax
FOSROC LOKFIX E75 APPLICATOR GUN
Applicator gun for Lokfix E75
Unit Size: Each
Stock Status:
Out of stock
£58.74 excl tax
FOSROC LOKFIX E77 585ml CARTRIDGE (sold by cartridge)
Fosroc Lokfix E77 is a two-component epoxy anchoring material, supplied in 3:1 ratio side-by-side cartridges with a static mixer nozzle.
When applied it sets and cures to firmly secure a variety of steel fixings into concrete and solid masonry substrates.
Unit Size: 385ml
When applied it sets and cures to firmly secure a variety of steel fixings into concrete and solid masonry substrates.
Unit Size: 385ml
Stock Status:
Out of stock
£30.89 excl tax
FOSROC LOKFIX S25 2.5Ltr BLUE LID
Fosroc Lokfix S25 is a two component polyester anchoring grout supplied in pre-measured quantities.
The material cures quickly to give consistent, high performance anchorages.
It is a pourable grade, with a 25 minute gel time at 20°c for use in vertical down holes where the hole is 8 to 40mm greater in diameter than the bar.
Unit Size: 2.5ltr
The material cures quickly to give consistent, high performance anchorages.
It is a pourable grade, with a 25 minute gel time at 20°c for use in vertical down holes where the hole is 8 to 40mm greater in diameter than the bar.
Unit Size: 2.5ltr
Stock Status:
Out of stock
£66.38 excl tax
FOSROC MS300 SEALANT 600cc
Fosroc Nitoseal MS300 is a one part, high modulus sealant based on hybrid silyl modified polyether technology.
It has a rapid rate of cure and forms a tough elastomer capable of supporting heavy wheel loads.
It may be applied between 6mm and 20mm wide, for internal trafficked flush joints and up to 40mm wide, for non-tracked/recessed tracked joints.
Unit Size: 600ml
It has a rapid rate of cure and forms a tough elastomer capable of supporting heavy wheel loads.
It may be applied between 6mm and 20mm wide, for internal trafficked flush joints and up to 40mm wide, for non-tracked/recessed tracked joints.
Unit Size: 600ml
Stock Status:
1015 in stock
£11.45 excl tax
FOSROC MS60 SEALANT GREY 380CC
Fosroc Nitoseal MS60 is a one part, low modulus sealant based on hybrid silyl modified polyether technology.
It is suitable for sealing joints in concrete, brickwork, blockwork, perimeter sealing around doors and windows, and non-trafficked floor joints.
Unit Size: 380ml
It is suitable for sealing joints in concrete, brickwork, blockwork, perimeter sealing around doors and windows, and non-trafficked floor joints.
Unit Size: 380ml
Stock Status:
Out of stock
£11.34 excl tax
FOSROC MULSEAL DP 25LTR
Fosroc Mulseal DP is a single part bitumen latex emulsion, applied by brush or squeegee.
The incorporation of rubber latex imparts elasticity to the dried coating.
Mulseal DP is suitable for use on most building materials such as concrete, brickwork, metals and stone.
Unit Size: 25ltr
The incorporation of rubber latex imparts elasticity to the dried coating.
Mulseal DP is suitable for use on most building materials such as concrete, brickwork, metals and stone.
Unit Size: 25ltr
Stock Status:
Out of stock
£142.68 excl tax
.png)
Payment options
