Personal menu

Manufacturer:

FOSROC NITOSEAL MS600 GREY 600cc

A civil engineering and water industry sealant is a one part medium modulus sealant based on hybrid silyl modified polyether technology. It has a fast rate of cure and forms a tough, highly durable and water resistant elastomer. Unit Size: 600ml

Availability: 2118 in stock

Depot Stock

Bury St Edmunds Depot	642 in stock
Kent Depot	285 in stock
Midlands Depot	828 in stock
Sheffield Depot	229 in stock
West London Depot	134 in stock

£15.68 excl tax

Qty:

i h

Overview
Specifications
Downloads
Product Disclaimer
Contact Us

Uses:
Nitoseal MS600 is suitable for sealing movement joints in buildings and civil engineering structures including joints that will be subject to intermittent or permanent immersion.
Typical applications include:
◇ Potable water tanks
◇ Reservoirs
◇ Sewage tanks
◇ Sea walls
◇ Basements
◇ Subways
◇ Parapets
◇ Bridges
◇ Superstructures

Advantages:
◇ Recommended for use in contact with potable water
◇ Meets key international standards
◇ Resistant to aerobic and anaerobic bacteriological attack
◇ Exhibits excellent water resistance
◇ Excellent resistance to dilute acides and alkalis
◇ Cures to a tough, elastic rubber seal
◇ Accomodates continuous and pronounced cyclic movement
◇ High resistance to ageing, reduces physical damage due to climatic extremes
◇ Single component yet fast rate of cure
◇ Easy to apply at low temperature
◇ Can be applied to damp substrates
◇ Isocyanate free technology

Products specifications

Shelf Life	Shelf life of 12 months if kept in a dry store at 10 – 20°C in original unopened packaging. If storedat hightemperatures and/ or high humidity, the shelf life may be significantly reduced.

Technical Datasheet

The product image(s) shown are for illustration purposes only and may not be an exact representation of the product.

The recommendations relating to the application and end-use of the products mentioned are based on our current knowledge and experience of the products when properly stored, handled and applied under normal conditions. All product specification, information and data made available on the website is subject to change. All information presented is believed to be accurate and reliable, but is given without guarantee, warranty or responsibility of any kind.

Your name *

Your email *

Subject: *

Enquiry *

Customers who bought this item also bought

FOSROC RENDEROC HB45 25 Kilo BAG

A high performance, hand/wet-spray applied, fibre reinforced high build, high strength, concrete reinstatement mortar conforming to the requirements of BS EN 1504-3 Class R4. Renderoc HB45 has been specifically engineered for vertical and overhead repair work. It can be applied in sections up to 80mm thickness in vertical locations and up to 70mm thickness in overhead locations in a single application without formwork. Unit Size: 25kg bag

Stock Status: 1922 in stock

£68.94 excl tax

FOSROC NITOSEAL MS2 PRIMER 750ml (2 PART PRODUCT)

A two component solvent based epoxy resin primer. Unit Size: 750ml

Stock Status: 34 in stock

£89.80 excl tax

FOSROC GX GUN 600cc (FOR FOILED PRODUCTS - SAUSAGES)

(FOR FOILED PRODUCTS - SAUSAGES)

Stock Status: 50 in stock

£67.65 excl tax

Five Star Cementitious Underwater High-Strength Grout 25kg

FIVE STAR UNDERWATER HS GROUT 25kg

Five Star Cementitious Underwater High-Strength Grout is an underwater pump grade, cement-based, non-shrink grout for pile restoration and similar applications. It is formulated with air release technology that combines high performance with the greatest reliability and meets the performance requirements of EN1504-3 (Class R4). Unit Size: 25kg

Stock Status: 21 in stock

£65.74 excl tax

Products from the Same Manufacturer

FOSROC CONBEXTRA GP GROUT 25 KILO B

Fosroc Conbextra GP Grout is a high-flow, nonshrink cementitious grout, conforming to the requirements of BS EN 1504-3 Class R4 and BS EN 1504-6: Anchoring of a reinforcing steel bar. Used for grouting gap thicknesses 10 to 75mm. Unit Size: 25kg

Stock Status: 2160 in stock

£11.51 excl tax

FOSROC GX GUN 600cc (FOR FOILED PRODUCTS - SAUSAGES)

(FOR FOILED PRODUCTS - SAUSAGES)

Stock Status: 50 in stock

£67.65 excl tax

FOSROC LOKFIX E35S 300ml CARTRIDGE

Fosroc Lokfix E35S is a two component polyester anchoring material, supplied in single component cartridges with a static mixer nozzle. When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates. Unit Size: 300ml

Stock Status: Out of stock

£276.20 excl tax

FOSROC LOKFIX E55S 300ml CARTRIDGE

Fosroc Lokfix E55S is a two component vinyl-ester anchoring material, supplied in single component cartridges with a static mixer nozzle. When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates. Unit Size: 300ml

Stock Status: Out of stock

£28.52 excl tax

FOSROC LOKFIX E75 APPLICATOR GUN

Applicator gun for Lokfix E75 Unit Size: Each

Stock Status: Out of stock

£60.97 excl tax

FOSROC LOKFIX E77 585ml CARTRIDGE (sold by cartridge)

A two-component epoxy anchoring material, supplied in 3:1 ratio side-by-side cartridges with a static mixer nozzle. When applied it sets and cures to firmly secure a variety of steel fixings into concrete and solid masonry substrates. Unit Size: 385ml

Stock Status: Out of stock

£30.89 excl tax

FOSROC LOKFIX S25 2.5Ltr BLUE LID

A two component polyester anchoring grout supplied in pre-measured quantities. The material cures quickly to give consistent, high performance anchorages. It is a pourable grade, with a 25 minute gel time at 20°c for use in vertical down holes where the hole is 8 to 40mm greater in diameter than the bar. Unit Size: 2.5ltr

Stock Status: Out of stock

£66.38 excl tax

FOSROC MS300 SEALANT 600cc

A one part, high modulus sealant based on hybrid silyl modified polyether technology. It has a rapid rate of cure and forms a tough elastomer capable of supporting heavy wheel loads. It may be applied between 6mm and 20mm wide, for internal trafficked flush joints and up to 40mm wide, for non-tracked/recessed tracked joints. Unit Size: 600ml

Stock Status: 856 in stock

£11.89 excl tax

FOSROC MS60 SEALANT GREY 380CC

A one part, low modulus sealant based on hybrid silyl modified polyether technology. It is suitable for sealing joints in concrete, brickwork, blockwork, perimeter sealing around doors and windows, and non-trafficked floor joints. Unit Size: 380ml

Stock Status: Out of stock

£11.34 excl tax

FOSROC MULSEAL DP 25LTR

A single part bitumen latex emulsion, applied by brush or squeegee. The incorporation of rubber latex imparts elasticity to the dried coating. Mulseal DP is suitable for use on most building materials such as concrete, brickwork, metals and stone. Unit Size: 25ltr

Stock Status: Out of stock

£148.09 excl tax

FOSROC NITOSEAL MS600 GREY 600cc

Payment options