Search
Product Categories
    Menu Close
    Manufacturer:

    SIKA MONOTOP 3020 25kg

    A 1-part, cementitious polymer modified, low shrinkage surfacing/ finishing mortar. It contains recycled waste materials and can reduce the carbon footprint application activity calculations. Unit Size: 25kg
     
    Availability: 54 in stock
    Depot Stock
    Bury St Edmunds Depot 25 in stock
    Kent Depot Out of stock
    Midlands Depot 29 in stock
    Sheffield Depot Out of stock
    West London Depot Out of stock
    £33.00 excl tax
    Sold in units of: BAGS
    i h

    Uses:
    ◇ Thin layer render
    ◇ Use as a concrete pore filler/ levelling mortar
    ◇ Repairing of minor defects (pores and honeycombed concrete)
    ◇ Structures requiring a Class R3,R2,R1 mortar
    ◇ For interior and exterior use

    Advantages:
    ◇ Uses recycled waste materials
    ◇ Layer thickness 1–5 mm
    ◇ Dust reduced
    ◇ Application up to 5 mm in 1 layer on vertical and horizontal applications
    ◇ High early strengths even at low temperatures
    ◇ Good surface finishing
    ◇ Low cracking sensitivity
    ◇ Sulphate resistant
    ◇ Hand and machine application (wet spray technique)
    ◇ Very good resistance to water and chloride penetration
    ◇ Compatible with Sikagard® overcoat systems
    ◇ Ready to mix with water
    ◇ Does not contain chlorides or other corrosion promoting additives
    ◇ A1 fire rating
    ◇ Class R3 of EN 1504-3
    ◇ Restoration work (Principle 3, method 3.1 and 3.3 of EN 1504-9)
    ◇ Preserving or restoring passivity (principle 7, method 7.1 and 7.2 of EN 1504-9)

    Products specifications
    Appearance Grey Powder
    Shelf Life 12 months from the date of production, product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +35 °C. Always refer to packaging.

    The product image(s) shown are for illustration purposes only and may not be an exact representation of the product.

    The recommendations relating to the application and end-use of the products mentioned are based on our current knowledge and experience of the products when properly stored, handled and applied under normal conditions. All product specification, information and data made available on the website is subject to change. All information presented is believed to be accurate and reliable, but is given without guarantee, warranty or responsibility of any kind.

    *
    *
    *
    *
    Customers who bought this item also bought
    Sika MonoTop®-4012 product image

    SIKA MONOTOP 4012 25kg

    A 1-part, cementitious, fibre reinforced, low shrinkage repair mortar. It contains recycled waste materials and can reduce the carbon footprint application activity calculations. Unit Size: 25kg bag
    Stock Status: 401 in stock
    £41.89 excl tax
    STOPPER Mini Formwork Plug

    FORMWORK STOPPER MINI 22 250pk

    The STOPPER Maxi is a solid plastic formwork sealing plug for tubes with an inner diameter of 21.5-23mm.

    STOPPER plugs were developed for pressure-tight sealing of fibre cement and plastic distance tubes.

    With the stopper, wall thicknesses made of fibre cement and plastic can be sealed pressure-tight on the inside.

    Unit Size: Bucket of 250 pieces
    Stock Status: 1 in stock
    £427.09 excl tax
    15mm Precon Backer Rod

    15mm PRECON BACKER ROD 550m

    Grey closed cell polyurethane (P.E.) backer rod for use in joints to reduce the depth. Varying sizes available.

    Unit Size: Each
    Stock Status: 7 in stock
    £139.43 excl tax
    Sika Monotop 1010 product image

    SIKA MONOTOP 1010 25kg

    A 1-part, cementitious, polymer modified coating material used as bonding primer and reinforcement corrosion protection. It contains recycled waste materials which leads to a reduced carbon footprint compared to an equivalent performing mortar. Unit Size: 25kg
    Stock Status: 39 in stock
    £44.34 excl tax