Manufacturer:

INSTARMAC ENVIROBED CD534 (Previously HA104)

High Performance Bedding Mortar

Instarmac Ultracrete Envirobed CD534 is an environmentally friendly alternative to resin-based materials, specifically formulated for the bedding of all access covers.

Unit Size: 18kg paper bag and 2.5 ltr bottle

Availability: 101 in stock

Depot Stock

Bury St Edmunds Depot	33 in stock
Kent Depot	28 in stock
Midlands Depot	Out of stock
Sheffield Depot	Out of stock
West London Depot	40 in stock

£49.86 excl tax

Qty:

i h

Overview
Specifications
Product Disclaimer
Downloads
Contact Us

Uses:
◇ Ultracrete Envirobed CD534 is supplied as a two-component system, which contains a blend of special cements, polymer graded aggregates and recycled glass.
◇ The combined components provide a high strength mortar, which can accomodate depths of 10-50mm in one pass.
◇ With superior compressive, tensile and flexural strengths reached after just 3 hours, Envirobed CD534 provides all the performance but none of the environmental hazards of traditional resinous materials, such as hazardous waste disposal.

Advantages:
◇ HAPAS Approved
◇ Conforms to HA104/09
◇ Can be used in wet conditions and in temperatures as low as 1°C
◇ BT LN550 and LN320 compliant
◇ 53N/mm² compressive strength in 3 hours
◇ 6.10N/mm² tensile strength at 3 hours
◇ No hazardous waste disposal
◇ Approved for use on the London Underground and Overground

Products specifications

Shelf Life	8 months if stored in closed original bags at temperatures between 5°C and 30°C. Avoid frost and sunlight.
Coverage	Approx 1 x 400mm x 400mm standard ironwork cover and frame @ 20mm dependent on bed depth, brickwork and substrate.

The product image(s) shown are for illustration purposes only and may not be an exact representation of the product.

The recommendations relating to the application and end-use of the products mentioned are based on our current knowledge and experience of the products when properly stored, handled and applied under normal conditions. All product specification, information and data made available on the website is subject to change. All information presented is believed to be accurate and reliable, but is given without guarantee, warranty or responsibility of any kind.

Technical Datasheet

Your name *

Your email *

Subject: *

Enquiry *

Product tags

bedding (1)

Products from the Same Manufacturer

Instarmac Ultratile ProLevel One product image

INSTAMAC LEVEL IT ONE

Deep Fill Floor Leveller

Instarmac Ultratile ProLevel One is a single part, high strength, rapid drying and curing cementitious smoothing and levelling compound.

Unit Size: 20kg

Stock Status: Out of stock

£15.83 excl tax

Instarmac Ultrascape Flowpoint Rapid Setting Grout product image

INSTAMAC RAPID SETTING GROUT GREY

Rapid Set Flowable Grout

Instarmac Ultrascape Flowpoint is a rapid set grout with high fluid consistency for early traficking that conforms to the strict demands of BS 7533.

Unit Size: 25kg paper bag

Stock Status: Out of stock

£12.31 excl tax

UltraCrete Instant Road Repair® 10mm product image

INSTANT ROAD REPAIR COLD LAY 10mm

UltraCrete Instant Road Repair® 10mm grade is designed for permanent repairs in type 3 and 4 roads.

Unit Size: 25kg foil bag and bucket

Stock Status: Out of stock

£15.35 excl tax

INSTARMAC ENVIROBED CD534 (Previously HA104)

INSTAMAC LEVEL IT ONE

INSTAMAC RAPID SETTING GROUT GREY

INSTANT ROAD REPAIR COLD LAY 10mm

Payment options