Personal menu

Manufacturer:

GRACE HYDRODUCT CF08 2.4M X 20M

GCP Hydroduct CF is a high density polyethylene combined cavity former and vapour barriers for drained BS 8102:2009 Type C basement construction. Hydroduct CF 20 is used for forming drained cavities horizontally and vertically. Hydroduct CF 08 is used for forming drained cavities horizontally and vertically in lower risk applications. Unit Size: Hydroduct CF 20: 2m x 20m roll Hydroduct CF 08: 2.4m x 20m roll

Availability: Out of stock

Depot Stock

Bury St Edmunds Depot	Out of stock
Kent Depot	Out of stock
Midlands Depot	Out of stock
Sheffield Depot	Out of stock
West London Depot	Out of stock

£488.49 excl tax

Sold in units of: ROLL

Qty:

i h

Overview
Specifications
Product Disclaimer
Downloads
Contact Us

Uses:
◇ Hydroduct CF is a highly efficient, cost effective drained cavity former.
◇ When installed against the internal face of concrete floors and walls Hydroduct CF will provide a continuous drainage path that must linked with the site internal drainage system.

Advantages:
◇ Design flexibility - Hydroduct cavity drain systems can be combined with GCP Preprufe membranes or Adprufe waterproofing admixture to provide enhanced protection in critical applications providing compliance with NHBC Chapter 5.4 combined system requirements from a single source
◇ Separates finishes from structure - reduces the risk of water ingress
◇ Waterproofing security - allows inspection and leak remediation before installation
◇ Economical - easy to install
◇ High strength - load transfer through dimpled design
◇ Chemical resistant - high density polyethylene resists all common groundwater contaminants
◇ Cost effective - reduces lost internal space relative to traditiona; drainage mediums

Products specifications

Unit Sizes Available	Hydroduct CF 20: 2m x 20m roll, Hydroduct CF 08: 2.4m x 20m roll

The product image(s) shown are for illustration purposes only and may not be an exact representation of the product.

The recommendations relating to the application and end-use of the products mentioned are based on our current knowledge and experience of the products when properly stored, handled and applied under normal conditions. All product specification, information and data made available on the website is subject to change. All information presented is believed to be accurate and reliable, but is given without guarantee, warranty or responsibility of any kind.

Technical Datasheet

Your name *

Your email *

Subject: *

Enquiry *

Products from the Same Manufacturer

GRACE 550MI KIT (8 X 5M=40M)

GCP Adcor 550MI kit is a double protection system for construction joints using 2-in-1 pre-applied, post injectable hydrophilic waterstop. Unit Size: Each box contains: Adcor 500MI 8 x 5m rolls (40m) Reinforced PVC tube 4m + 16 caps Blue Trumpets 16 pieces Adcor 550MI clips 175 pieces PVC tube clips 16 pieces

Stock Status: Out of stock

£2,022.28 excl tax

GRACE 6mm SERVIPAK 1.5mx1m

GCP Servipak protection boards are robust, bitumen impregnated boards, designed for permanent protection of Servidek. The boards are laid into "wet" Servidek liquid membrane to provide protection against damage from hot and cold applied finishes. Unit Size: 6mm x 1m 1.5m (1.5sqm)

Stock Status: Out of stock

£30.34 excl tax

GRACE ADCORE 500S WATERSTOP 5m ROL

GCP Adcor 500S is a thick sectioned, conformable, hydro-expansive waterstop for preventing water entry through joints in concrete substructures. Unit Size: 25mm x 20mm waterstop strip, supplied in 5m rolls

Stock Status: 564 in stock

£75.11 excl tax

GRACE ADCORE 500T WATERSTOP 5m ROL

GCP Adcor 500T is a thick sectioned, conformable, hydro-expansive waterstop for preventing saline and brackish water entry throughjoints in concrete substructures. Unit Size: 25mm x 20mm waterstop strip, supplied in 5m rolls

Stock Status: 1 in stock

£99.00 excl tax

GRACE ADCORE ADHESIVE 310cc CARTRIDGE

GCP Adcor Adhesive is for gluing Adcor 500S & Adcor 500T to smooth concrete, steel and plastic substrates. Supplied in cartridges for gun applications. Unit Size: 310ml cartridge

Stock Status: 770 in stock

£26.54 excl tax

GRACE ADCORE MASTIC 300cc CARTRIDGE

GCP Adcore Mastic is a hydrophilic mastic for use as a bedding bead on irregular concrete surfaces prior to the application of Adcor 500S or Adcor 500T. Unit Size: 310ml cartridge

Stock Status: 267 in stock

£61.20 excl tax

GRACE AEROFIL 1 10mmX2mX0.8m

GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades. Unit Size: 10mm x 0.8m x 2m (1.6m²)

Stock Status: 61 in stock

£26.68 excl tax

GRACE AEROFIL 1 20mmX2mX0.8m

GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades. Unit Size: 20mm x 0.8m x 2m (1.6m²)

Stock Status: 179 in stock

£51.69 excl tax

GRACE AEROFIL 1 25mmX2mX0.8m

GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades. Unit Size: 25mm x 0.8m x 2m (1.6m²)

Stock Status: 138 in stock

£63.86 excl tax

GRACE AEROFIL 2 10mmX2mX0.8m

GCP Aerofil 2 is a high density, compressible closed cell, polyethylene filler for movement joints in civil/structural works and water retaining structures Unit Size: 10mm x 0.8m x 2m (1.6m²)

Stock Status: 239 in stock

£44.71 excl tax

GRACE HYDRODUCT CF08 2.4M X 20M

Payment options