Personal menu

Manufacturer:

GRACE HYDRODUCT 220 1.25X32m

GCP Hydroduct 200 is a polypropylene non-woven filter fabric on one face of a 12mm studded drainage core with a pressure dissipation plastic film bonded to the other face. Applied to walls of basements that have been waterproofed with Bituthene membranes. Also applied to existing basement walls and permanent shuttering prior to the application of Preprufe membranes. Unit Size: 1.25m x 32m x 12mm

Availability: Out of stock

Depot Stock

Bury St Edmunds Depot	Out of stock
Kent Depot	Out of stock
Midlands Depot	Out of stock
Sheffield Depot	Out of stock
West London Depot	Out of stock

£964.71 excl tax

Qty:

i h

Overview
Product Disclaimer
Contact Us

Uses:
◇ As an alternative to traditional 'French' drains around the perimeter of basement structure
◇ With waterproofing membranes on walls of basement structures

Advantages:
◇ Polystyrene resists creep under long term loading - drainage capacity maintained
◇ High flow capacity - can drain 5.29 litres/sec/m when backfilled to a depth of 5m
◇ Geotextile filter fabric prevents soil particles entering drainage core - minimises risk of clogging
◇ Rot proof - unaffected by immersion in water and resistant to dilute concentrations of chemicals
◇ No drainage aggregates needed - excavated soil re-used as backfil.

The product image(s) shown are for illustration purposes only and may not be an exact representation of the product.

The recommendations relating to the application and end-use of the products mentioned are based on our current knowledge and experience of the products when properly stored, handled and applied under normal conditions. All product specification, information and data made available on the website is subject to change. All information presented is believed to be accurate and reliable, but is given without guarantee, warranty or responsibility of any kind.

Your name *

Your email *

Subject: *

Enquiry *

Products from the Same Manufacturer

GRACE 550MI KIT (8 X 5M=40M)

GCP Adcor 550MI kit is a double protection system for construction joints using 2-in-1 pre-applied, post injectable hydrophilic waterstop. Unit Size: Each box contains: Adcor 500MI 8 x 5m rolls (40m) Reinforced PVC tube 4m + 16 caps Blue Trumpets 16 pieces Adcor 550MI clips 175 pieces PVC tube clips 16 pieces

Stock Status: Out of stock

£2,022.28 excl tax

GRACE 6mm SERVIPAK 1.5mx1m

GCP Servipak protection boards are robust, bitumen impregnated boards, designed for permanent protection of Servidek. The boards are laid into "wet" Servidek liquid membrane to provide protection against damage from hot and cold applied finishes. Unit Size: 6mm x 1m 1.5m (1.5sqm)

Stock Status: Out of stock

£30.34 excl tax

GRACE ADCORE 500S WATERSTOP 5m ROL

GCP Adcor 500S is a thick sectioned, conformable, hydro-expansive waterstop for preventing water entry through joints in concrete substructures. Unit Size: 25mm x 20mm waterstop strip, supplied in 5m rolls

Stock Status: 557 in stock

£75.11 excl tax

GRACE ADCORE 500T WATERSTOP 5m ROL

GCP Adcor 500T is a thick sectioned, conformable, hydro-expansive waterstop for preventing saline and brackish water entry throughjoints in concrete substructures. Unit Size: 25mm x 20mm waterstop strip, supplied in 5m rolls

Stock Status: 1 in stock

£99.00 excl tax

GRACE ADCORE ADHESIVE 310cc CARTRIDGE

GCP Adcor Adhesive is for gluing Adcor 500S & Adcor 500T to smooth concrete, steel and plastic substrates. Supplied in cartridges for gun applications. Unit Size: 310ml cartridge

Stock Status: 770 in stock

£26.54 excl tax

GRACE ADCORE MASTIC 300cc CARTRIDGE

GCP Adcore Mastic is a hydrophilic mastic for use as a bedding bead on irregular concrete surfaces prior to the application of Adcor 500S or Adcor 500T. Unit Size: 310ml cartridge

Stock Status: 231 in stock

£61.20 excl tax

GRACE AEROFIL 1 10mmX2mX0.8m

GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades. Unit Size: 10mm x 0.8m x 2m (1.6m²)

Stock Status: 61 in stock

£26.68 excl tax

GRACE AEROFIL 1 20mmX2mX0.8m

GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades. Unit Size: 20mm x 0.8m x 2m (1.6m²)

Stock Status: 176 in stock

£51.69 excl tax

GRACE AEROFIL 1 25mmX2mX0.8m

GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades. Unit Size: 25mm x 0.8m x 2m (1.6m²)

Stock Status: 138 in stock

£63.86 excl tax

GRACE AEROFIL 2 10mmX2mX0.8m

GCP Aerofil 2 is a high density, compressible closed cell, polyethylene filler for movement joints in civil/structural works and water retaining structures Unit Size: 10mm x 0.8m x 2m (1.6m²)

Stock Status: 239 in stock

£44.71 excl tax

GRACE HYDRODUCT 220 1.25X32m

Payment options