Personal menu

Manufacturer:

GRACE BETEC FLEX PART B

GCP Betec Flex is a two component flexible crack bridging cement based coating designed for the waterproofing of new and existing structures such as basements, elevator pits, concrete tanks, reservoirs and planter boxes.

Unit Size:
A Component: 9kg plastic pails
B Component: 23kg bags

Availability: 78 in stock

Depot Stock

Bury St Edmunds Depot	24 in stock
Kent Depot	10 in stock
Midlands Depot	Out of stock
Sheffield Depot	22 in stock
West London Depot	22 in stock

£81.32 excl tax

Sold in units of: EACH

Qty:

i h

Overview
Specifications
Product Disclaimer
Downloads
Contact Us

Uses:
◇ Concrete surface protection coating according EN 1504-2 principle 2.2 Moisture Control.
◇ Waterproofing of concrete and masonry structures which are susceptible to movements under positive or negative water pressure
◇ Horizontal and vertical applications in water reservoirs, tanks, tunnels, basements etc

Advantages:
◇ Excellent adhesion
◇ Water vapour permeable
◇ Crack bridging to Class A3
◇ Permanent flexible
◇ UV-resistant
◇ Fast application
◇ High yield
◇ Application by brush or spray equipment to internal and external surfaces
◇ Application to a damp substrate
◇ Equipment can be cleaned with water
◇ Cement based
◇ Solvent free

Products specifications

Shelf Life	12 months, should be stored in a cool dry environment.

The product image(s) shown are for illustration purposes only and may not be an exact representation of the product.

The recommendations relating to the application and end-use of the products mentioned are based on our current knowledge and experience of the products when properly stored, handled and applied under normal conditions. All product specification, information and data made available on the website is subject to change. All information presented is believed to be accurate and reliable, but is given without guarantee, warranty or responsibility of any kind.

Technical Datasheet

Your name *

Your email *

Subject: *

Enquiry *

Products from the Same Manufacturer

GRACE 550MI KIT (8 X 5M=40M)

GCP Adcor 550MI kit is a double protection system for construction joints using 2-in-1 pre-applied, post injectable hydrophilic waterstop.

Unit Size:
Each box contains:
Adcor 500MI 8 x 5m rolls (40m)
Reinforced PVC tube 4m + 16 caps
Blue Trumpets 16 pieces
Adcor 550MI clips 175 pieces
PVC tube clips 16 pieces

Stock Status: Out of stock

£2,022.28 excl tax

GRACE 6mm SERVIPAK 1.5mx1m

GCP Servipak protection boards are robust, bitumen impregnated boards, designed for permanent protection of Servidek.

The boards are laid into "wet" Servidek liquid membrane to provide protection against damage from hot and cold applied finishes.

Unit Size: 6mm x 1m 1.5m (1.5sqm)

Stock Status: Out of stock

£30.34 excl tax

GRACE ADCORE 500S WATERSTOP 5m ROL

GCP Adcor 500S is a thick sectioned, conformable, hydro-expansive waterstop for preventing water entry through joints in concrete substructures.

Unit Size: 25mm x 20mm waterstop strip, supplied in 5m rolls

Stock Status: 541 in stock

£75.11 excl tax

GRACE ADCORE 500T WATERSTOP 5m ROL

GCP Adcor 500T is a thick sectioned, conformable, hydro-expansive waterstop for preventing saline and brackish water entry throughjoints in concrete substructures.

Unit Size: 25mm x 20mm waterstop strip, supplied in 5m rolls

Stock Status: 1 in stock

£99.00 excl tax

GRACE ADCORE ADHESIVE 310cc CARTRIDGE

GCP Adcor Adhesive is for gluing Adcor 500S & Adcor 500T to smooth concrete, steel and plastic substrates.
Supplied in cartridges for gun applications.

Unit Size: 310ml cartridge

Stock Status: 595 in stock

£26.54 excl tax

GRACE ADCORE MASTIC 300cc CARTRIDGE

GCP Adcore Mastic is a hydrophilic mastic for use as a bedding bead on irregular concrete surfaces prior to the application of Adcor 500S or Adcor 500T.

Unit Size: 310ml cartridge

Stock Status: 218 in stock

£61.20 excl tax

GRACE AEROFIL 1 10mmX2mX0.8m

GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades.

Unit Size: 10mm x 0.8m x 2m (1.6m²)

Stock Status: 57 in stock

£26.68 excl tax

GRACE AEROFIL 1 20mmX2mX0.8m

GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades.

Unit Size: 20mm x 0.8m x 2m (1.6m²)

Stock Status: 101 in stock

£51.69 excl tax

GRACE AEROFIL 1 25mmX2mX0.8m

GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades.

Unit Size: 25mm x 0.8m x 2m (1.6m²)

Stock Status: 177 in stock

£63.86 excl tax

GRACE AEROFIL 2 10mmX2mX0.8m

GCP Aerofil 2 is a high density, compressible closed cell, polyethylene filler for movement joints in civil/structural works and water retaining structures

Unit Size: 10mm x 0.8m x 2m (1.6m²)

Stock Status: 163 in stock

£44.71 excl tax

GRACE BETEC FLEX PART B

Payment options