Personal menu

Manufacturer:

GRACE BENTORUB MS FIXER 400cc

GCP Bentorub MS Fixer is a 1 component, caulk applied elastic MS-polymer adhesive. MS Fixer cures into an elastic compound with very good adhesion to most construction materials. MS Fixer is specially developed as adhesive for the Colflex range of EPDM membranes. Unit Size: 400cm³ sausages

Availability: Out of stock

Depot Stock

Bury St Edmunds Depot	Out of stock
Kent Depot	Out of stock
Midlands Depot	Out of stock
Sheffield Depot	Out of stock
West London Depot	12 in stock

£21.47 excl tax

Qty:

i h

Overview
Specifications
Product Disclaimer
Downloads
Contact Us

Uses:
◇ Application of Colflex membranes.
◇ Sealing the edges of Colfex membranes
◇ Gluing Bentorub + and Bentorub Salt bentonite strips to dry and moist substrates.
◇ Gluing Swellseal 3V/8V waterproofing strips to dry and moist substrates
◇ Sealing joints between wall and slab
◇ Sealing joints in slabs
◇ As adhesive for steel and wood

Advantages:
◇ Multi purpose 1-component adhesive
◇ Very good adhesion to most construction materials
◇ MS Fixer can be applied to rough and moist surfaces
◇ MS Fixer cures into an elastic rubber like compound
◇ MS Fixer resists humid conditions during curing
◇ Good overall chemical resistance
◇ Solvent free
◇ Easy to apply using a standard caulking gun
◇ Good UV-resistance

Products specifications

Shelf Life	12 months

The product image(s) shown are for illustration purposes only and may not be an exact representation of the product.

The recommendations relating to the application and end-use of the products mentioned are based on our current knowledge and experience of the products when properly stored, handled and applied under normal conditions. All product specification, information and data made available on the website is subject to change. All information presented is believed to be accurate and reliable, but is given without guarantee, warranty or responsibility of any kind.

Technical Datasheet

Your name *

Your email *

Subject: *

Enquiry *

Products from the Same Manufacturer

AQUATEK PLUG 10 KILO (was betec plug 10)

GCP Betec Plug is a quick setting, cementitious, waterproof plugging compound for stopping flowing/seeping water entry into sub-structures. Unit Size: 10kg

Stock Status: 5 in stock

£83.20 excl tax

GRACE 550MI KIT (8 X 5M=40M)

GCP Adcor 550MI kit is a double protection system for construction joints using 2-in-1 pre-applied, post injectable hydrophilic waterstop. Unit Size: Each box contains: Adcor 500MI 8 x 5m rolls (40m) Reinforced PVC tube 4m + 16 caps Blue Trumpets 16 pieces Adcor 550MI clips 175 pieces PVC tube clips 16 pieces

Stock Status: Out of stock

£2,461.67 excl tax

GRACE 6mm SERVIPAK 2 x 1m

GCP Servipak protection boards are robust, bitumen impregnated boards, designed for permanent protection of Servidek. The boards are laid into "wet" Servidek liquid membrane to provide protection against damage from hot and cold applied finishes. Unit Size: 6mm x 1m 1.5m (1.5sqm)

Stock Status: Out of stock

£49.24 excl tax

GRACE ADCORE 500S WATERSTOP 5m ROL

GCP Adcor 500S is a thick sectioned, conformable, hydro-expansive waterstop for preventing water entry through joints in concrete substructures. Unit Size: 25mm x 20mm waterstop strip, supplied in 5m rolls

Stock Status: 408 in stock

£91.43 excl tax

GRACE ADCORE 500T WATERSTOP 5m ROL

GCP Adcor 500T is a thick sectioned, conformable, hydro-expansive waterstop for preventing saline and brackish water entry throughjoints in concrete substructures. Unit Size: 25mm x 20mm waterstop strip, supplied in 5m rolls

Stock Status: Out of stock

£120.50 excl tax

GRACE ADCORE ADHESIVE 310cc CARTRIDGE

GCP Adcor Adhesive is for gluing Adcor 500S & Adcor 500T to smooth concrete, steel and plastic substrates. Supplied in cartridges for gun applications. Unit Size: 310ml cartridge

Stock Status: 447 in stock

£32.31 excl tax

GRACE ADCORE MASTIC 300cc CARTRIDGE

GCP Adcore Mastic is a hydrophilic mastic for use as a bedding bead on irregular concrete surfaces prior to the application of Adcor 500S or Adcor 500T. Unit Size: 310ml cartridge

Stock Status: 90 in stock

£74.50 excl tax

GRACE AEROFIL 1 10mmX2mX0.8m

GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades. Unit Size: 10mm x 0.8m x 2m (1.6m²)

Stock Status: 33 in stock

£33.38 excl tax

GRACE AEROFIL 1 20mmX2mX0.8m

GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades. Unit Size: 20mm x 0.8m x 2m (1.6m²)

Stock Status: 47 in stock

£64.44 excl tax

GRACE AEROFIL 1 25mmX2mX0.8m

GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades. Unit Size: 25mm x 0.8m x 2m (1.6m²)

Stock Status: 84 in stock

£79.13 excl tax

GRACE BENTORUB MS FIXER 400cc

Payment options