GRACE AEROFIL 2 25mmX2mX0.8m

Uses:
◇ Aerofil 2 is designed for water retaining structures such as reservoirs, sea walls subject to thermal movement and wave action, and heavily trafficked floors such as pedestrian areas, factory flooring and elevated structures.
◇ It's high compressive strength and density combined with low load transfer characteristics make it ideal for creating joints in large in-situ concrete sections without distortion from wet concrete and vibrating techniques.
◇ Its inherent compressive strength and stiffness provides excellent resistant to water pressure so that the subsequent surface sealant is supported to prevent adhesion failure at the shoulders of the joint.

Advantages:
◇ High density - provides support for surface sealants subject to hydrostatic pressure
◇ Non-extruding - will not be displaced by compressive loads and movement
◇ Resilient - will not distort under load from wet concrete
◇ Deformable - accpets movement with low load transfer
◇ Recovery - 95% after 25% compression
◇ Closed cell - prevents water absorption
◇ Chemically resistant - inert to most dilute acids and alkalis, resistant to oil and hydrocarbons, rot proof