Search
Product Categories
    Menu Close
    Manufacturer:

    ARDEX A35 MIX 25kg

    A pre-blended mix of Ardex A 35 cement and graded sand to produce ultra-rapid drying floor screeds for internal locations. Unit Size: 25kg
     
    Availability: 21 in stock
    Depot Stock
    Bury St Edmunds Depot 21 in stock
    Kent Depot Out of stock
    Midlands Depot Out of stock
    Sheffield Depot Out of stock
    West London Depot Out of stock
    £38.02 excl tax
    Sold in units of: BAGS
    i h

    Uses:
     
    Pre-Blended Ultra Rapid Drying Cement For Internal Screeds

    Advantages:
     
    Pre-blended with graded sand for convenience - just add water
     
    Passes BRE Screed (ISCR) Testing after 6 hours
     
    After one day achieves the acceptable minimum compressive and tensile bending strengths attained by an ordinary cement screed after 28 days
     
    Can be walked on after 3 hours, and floor coverings can be installed after just 24 hours irrespective of thickness.



     

    Products specifications
    Coverage Approximately 0.5m2 at 25mm thick per 25kg unit
    Shelf Life ARDEX A 35 MIX contains a reducing agent to control the level of Chromium VI when mixed prior to use. ARDEX A 35 MIX must be stored in unopened packaging, clear of the ground in cool dry conditions and protected from excessive draught. If stored correctly, as detailed above, and used within 12 months of the date shown on the packaging, the activity of the reducing agent (added to control the level of soluble Chromium VI) will be maintained and this product will contain, when mixed with water, no more than 0.0002% (2ppm) soluble Chromium VI of the total dry weight of the cement content of this product. Use of the product after the end of the declared storage period may increase the risk of allergic reaction

    The product image(s) shown are for illustration purposes only and may not be an exact representation of the product.

    The recommendations relating to the application and end-use of the products mentioned are based on our current knowledge and experience of the products when properly stored, handled and applied under normal conditions. All product specification, information and data made available on the website is subject to change. All information presented is believed to be accurate and reliable, but is given without guarantee, warranty or responsibility of any kind.

    *
    *
    *
    *