Sikalastic®-8800 is a two part, elastic, 100 % solids, very fast curing and coloured pure polyurea liquid applied membrane with good chemical resistance.
Unit Size: Part A=212kg, Part B=191kg
Sikalastic® Primer-01 is a two-component, low odour, rapid curing, high solids, PUA/PU hybrid primer for consistent and durable adhesion of Sikalastic® Systems on cement based substrates.
Unit Sizes: 4.5ltr (Part A=3.48ltr, Part B=1.02ltr)
Sikalastic® Metal Primer is a two-component, anticorrosive primer for exposed metal substrates and blocking primer over bituminous felts and coatings.
Unit Size: 5ltr (Part A=2.5ltr, Part B=2.5ltr)
Sikalastic® Primer-01 is a two-component, low odour, rapid curing, high solids, PUA/PU hybrid primer for consistent and durable adhesion of Sikalastic® Systems on cement based substrates.
Unit Sizes: 11.5ltr (Part A=8.89ltr, Part B=2.61ltr)
SikaProof® A-12 is an embossed polyolefin FPO sheet membrane for pre-applied fully bonded below ground waterproofing of reinforced concrete structures.
Unit Sizes: 1m x 20m
SikaProof® A-12 is an embossed polyolefin FPO sheet membrane for pre-applied fully bonded below ground waterproofing of reinforced concrete structures.
Unit Sizes: 2m x 20m
This product is not purchasable on the website. Please call or email to place your order.
SikaProof® A Edge is a preformed L-shaped SikaProof® A membrane sheet in 1.0 m width folded in 50/50 cm with a self-adhesive strip on both sides for a faster and easier application of perimeter edges, corners and connections.
Unit Size: 1m x 20m
SikaProof® A-05 is a fully bonded, composite sheet membrane waterproofing system for reinforced concrete structures.
It consists of an embossed polyolefin (FPO) based membrane laminated with a unique sealant and a non-woven fleece with a self-adhesive strip on the longitudinal side for the overlap.
Unit Sizes: 1m x 30m
SikaProof® A-05 is a fully bonded, composite sheet membrane waterproofing system for reinforced concrete structures.
It consists of an embossed polyolefin (FPO) based membrane laminated with a unique sealant and a non-woven fleece with a self-adhesive strip on the longitudinal side for the overlap.
Unit Sizes: 2m x 30m
This product is not purchasable on the website. Please call or email to place your order.
SikaProof® A-08 is an embossed polyolefin FPO sheet membrane for pre-applied fully bonded below ground waterproofing of reinforced concrete structures.
Unit Sizes: 1m x 25m
SikaProof® A-08 is an embossed polyolefin FPO sheet membrane for pre-applied fully bonded below ground waterproofing of reinforced concrete structures.
Unit Sizes: 2m x 25m
This product is not purchasable on the website. Please call or email to place your order.
SikaProof® A Edge is a preformed L-shaped SikaProof® A membrane sheet in 1.0 m width folded in 50/50 cm with a self-adhesive strip on both sides for a faster and easier application of perimeter edges, corners and connections.
Unit Size: 1m x 25m
SikaProof® ExTape-150 is a self-adhesive tape based on a butyl adhesive for external jointing and detailing on SikaProof® A & P membrane systems.
The tape is composed of a yellow carrier film and a divided release liner.
Unit Size: Length 20m x Width 150mm
SikaProof® P-12 is a flexible polyolefin (FPO) self-adhesive sheet membrane. Designed to be used for post-applied fully bonded below ground waterproofing of existing reinforced concrete structures.
Unit Size: 1m x 20m
SikaProof® Patch-200 B is a single-sided, self-adhesive tape based on SikaProof® membrane, laminated with a butyl adhesive covered with a release liner.
Unit Size: 200mm x 20m
SikaProof® Primer-01 is a synthetic rubber based, solvent-dispersed, primer for use as an integral component of the SikaProof®/ SikaBits® self-adhesive sheet membrane waterproofing systems.
Unit Sizes: 12.5kg
SikaProof® Primer-01 is a synthetic rubber based, solvent-dispersed primer. Designed to be used as an integral component of the SikaProof®/ SikaBits® self-adhesive sheet membrane waterproofing systems.
Unit Sizes: 5kg
SikaProof® Tape‐150 A is a self‐adhesive tape, based on a polyacrylate adhesive on a yellow carrier film coated with the SikaProof A fully bonded system.
Unit Sizes: 150mm x 25m roll
SikaSwell® A is a rectangular acrylic sealing profile. It swells in contact with water to seal all types of construction joints and penetrations in concrete structures.
Unit Size: 20mm x 5mm x 20m
SikaSwell® A is a rectangular acrylic sealing profile. It swells in contact with water to seal all types of construction joints and penetrations in concrete structures.
Unit Size: 20mm x 10mm x 10m
SikaSwell® A Ring is an acrylic sealing ring profile. It swells in contact with water to seal spacer bars / tie bars / tie rods.
Unit Size: Internal Diameter=18mm, External diameter=20mm
SikaSwell® A Ring is an acrylic sealing ring profile. It swells in contact with water to seal spacer bars / tie bars / tie rods.
Unit Size: Internal Diameter=26mm, External diameter=28mm
SikaSwell® A Ring is an acrylic sealing ring profile. It swells in contact with water to seal spacer bars / tie bars / tie rods.
Unit Size: Internal Diameter=43mm, External diameter=45mm
SikaSwell® S-2 is a 1-part polyurethane hydrophilic sealant which swells in contact with water to seal all types of construction joints and penetrations in concrete structures.
Unit Size: 600ml