A flexible waterproofing tape based on modified flexible Polyolefin (FPO) with advanced adhesion properties.
It has red masking tape on one side for easier application over expansion joits.
Unit Size: 1 roll of 25m length
Varying widths available: 10, 20, 30cm
A flexible waterproofing tape based on modified flexible Polyolefin (FPO) with advanced adhesion properties. It has red masking tape on one side for easier application over expansion joits.
Unit Size: 1 roll of 25m length, thickness 1mm
Varying widths available: 10, 20, 30cm
A flexible waterproofing tape based on modified flexible Polyolefin (FPO) with advanced adhesion properties.
It has red masking tape on one side for easier application over expansion joints.
Unit Size: 25m long x 2mm thick x 200mm width
A 2 part, polyurea/polyurethane-hybrid primer for cementitious substrates.
The rapid curing performance allows overcoating of Sika Liquid Applied Membrane (LAM) roofing systems after 30 minutes.
Unit Size: 11.5ltr (Part A=9ltr, Part B=2.5ltr)
A one part polymer modified cement based waterproof coating comprising of special cement based components and admixtures.
When mixed with water a slurry or mortar material is produced for direct application to a variety of construction substrates.
Unit Size: 25kg bag
A flexible waterproofing tape on polyvinyl chloride (PVC) with advanced adhesion properties.
The tape seals construction and connection joints on concrete or metal substrates.
Unit Sizes: 1.6mm thickness x 30m length x 220mm width
A high density polyethylene (HDPE), heavy duty drainage and protection sheet with 10mm high dimples on the bottom layer and a bonded geotextile (PP) filtration layer on the top layer.
Unit Size: 2,44m width x 12,50m length
Sika 1 Finishing Mortar is part of the Sika 1 Pre-Bagged Structural Waterproofing System.
These special mortars are pre-bagged kiln dried blends of specially graded aggregates and cements, with waterproofing admixtures, packaged in 4 grades at the appropriate mix ratios for optimum application performance and durability.
Unit Size: 25kg
The Sika flexible jetting eye has been designed to allow cleaning of the channel system and also an inspection port.
The unique flexible upstand jetting point can be easily bent to allow the channel to be used in a wall port system.
It also has the benefit of allowing slabs to be laid whilst still being easily accessible afterwards.
The Sika Fuko Injection Junction Box can be installed in concrete construction joints to waterproof them and also to seal any cracks or voids in the joint areas.
Unit Size: Box of 5
A re-injectable hose for sealing various construction and connection joints in watertight concrete structures.
Unit Size: Supplied as a Combi-pack in a cardboard box containing:
▹ 200m SikaFuko VT 1
▹ 10m green PVC-hose (inlet)
▹ 10m white PVC-hose (outlet)
▹ Accessories: (2m connecting pipe, 4m heat shrink sleeve, x 50 closure plugs, 1 can of glue, 1 roll of tape, x 800 fasttening clips)
A 2 component polymer modified bituminous flexible thick coating extended with fibre for waterproofing against dampness and moisture ingress.
Unit Size: 32kg (Part A-Liquid=24kg, Part B-Powder=8kg)
A 2-part epoxy based thixotropic adhesive for bonding the Sikadur-Combiflex® SG modified flexible Polyolefin (FPO) waterproofing tapes to different substrates.
Unit Size: 6kg (A+B)
A two part, elastic, 100% solids, very fast curing and coloured Polyurethane/ Polyurea-Hybrid liquid applied membrane with moderate chemical resistance.
Unit Size: Part A=211kg, Part B=202kg