Fosroc Waterproofing

A cold applied, flexible, high performance waterproofing and radon barrier membrane, incorporating a cross laminated HDPE carrier film with a polymer modified bitumen compound. Unit Size: 1m x 20m

A high performance methane, radon and carbon dioxide resisting, self-adhesive waterproof membrane for basements and below ground structures. It incorporates an aluminium layer and a polymer modified bitumen compound on a high strength polymer backing film. Unit Size: 1m x 20m

Fosroc Proofex Angle Fillets are strips fixed at all floor and wall junctions with a 6mm bead of Nitoseal MB175.

Fosroc Cavitydrain membranes are manufactured from chemically resistant high density polyethylene in a range of stud depths designed to permit high water flow through a permanent void formed against a substrate. Fosroc Proofex Cavitydrain 80 is a space saving solution for vertical applications in conjunction with internal blockwork walls and dry lining systems. Unit Size: 2.07m x 20m

A two-component, fast-setting, flexible and tough epoxy system. Unit Size: 6 x 560ml sachet units (includes 3 static mixers)

A robust, pre-applied, fully bonded, gas-resistant, waterproofing membrane for use in below ground, reinforced concrete structures. Unit Size: 1.27m x 30m

A reinforced, double sided waterproof adhesive tape for sealing and jointing roll ends, cut edges and corner pieces. Unit Size: 200mm x 10m x 1.5mm

A 125mm corner piece made from polyethylene membrane with a 100mm butyl selvedge for use in conjuction with Proofex L Section.

A 125mm corner piece made from polyethylene membrane with a 100mm butyl selvedge for use in conjuction with Proofex L Section.

A 10m long x 250mm wide section of polyethylene with 2butyl selvedge strips. It is used by bending at 90° along its length for application between horizontal and vertical membrane to provide waterproofing continuity and it also connects with internal and external corner pieces. Proofex L section is supplied with a butyl "closure" strip at each end. Unit Size: 125mm x 125mm x 10m

A two component bituminous liquid membrane for waterproofing of underground structures and intricate details in conjunction with Proofex waterproofing systems. Unit Size: 28kg pack

A reinforcing mesh for use in conjunction with Proofex LM for angles and pipe penetrations etc. Unit Size: 100mm x 50m

A bitumen impregnated board, designed to protect membranes from damage through backfilling and trafficking.

A geocomposite drainage sheet with a 8mm thick HDPE cuspated core and non-woven polypropylene geotextiles, recommended for most building and civil engineering drainage applications. Unit Size: 2.4m x 20m roll

A pre-formed pipe collar with a flat based to simplify pipe penetration details. Available in standard diameters 110mm and 160mm.

A pre-formed pipe collar with a flat based to simplify pipe penetration details. Available in standard diameters 110mm and 160mm.

A BBA approved high performance, totally gas-impervious, reinforced membrane. It is a black/white, multi-layer, low density polyethylene, ground gas resistant based membrane with an integral aluminium foil layer and a polypropylene reinforcing grid. Unit Size: 2m x 50m roll This product is not purchasable on the website. Please call or email to place your order.

A 50mm wide double-sided butyl tape for sealing lap joint and for use in detailing work. Unit Size: 50mm x 30m x 1.5mm

A high performance epoxy waterproof resin for detailing of waterproofing and ground gas protection systems. It is a three component system consisting of base resin, liquid hardener and specially graded inert fillers. It is suitable for thicknesses from 20-100mm. Unit Size: 15 ltr packs containing liquid, base and hardener.

An externally placed waterstop for use where the joint line coincides with a change in level of the slab soffit. Unit Size: 3m lengths

Fosroc Supercast Predimax Injection Hose comprises of a double-walled, patented PVC hose specially formulated to be durable, robust and fully resistant to continuous immersion in ground water, saline, sewage, alkalis, acids, petrol, diesel and alcohol. Unit Size: 100m roll plus kit items detailed in TDS

Fosroc Supercast Rearguard sections incorporate a flat top center box, allowing movement to be accommodated in expansion joints. They also provide a seat to support joint fillers. Unit Size: 150mm x 12m Roll