Concrete Repair & Grout

A high strength, polymer modified, cementitious repair material which has been specifically engineered for vertical or horizontal use. It can be applied up to 10mm thickness in vertical locations and up to 100mm thickness in horizontal locations in a single application. Unit Size: 25kg

A high performance, multi-purpose cementitious protective coating, fairing and levelling mortar for applications from feather edge to 5mm, conforming to the requirements of BS EN 1504-3 Class R4. Unit Size: 20kg powder & 5 ltr liquid

Deep Fill Floor Leveller

Instarmac Ultratile ProLevel One is a single part, high strength, rapid drying and curing cementitious smoothing and levelling compound.

Unit Size: 20kg

A one-part, early ultra high strength grout with special shrinkage compensating components, which give a non-shrink grout in both the plastic and harden states. Unit Size: 25kg

.

A cementitious epoxy resin compensated 3-component coating material with corrosion inhibitor, used as bonding primer and reinforcement corrosion protection. Unit Size: 20kg (A=1.14kg, B=2.86kg, C=16kg)

A one part, high flow, rapid strength cementitious grout. Unit Size: 25kg bag

A surface applied mixed corrosion inhibitor, designed for use as an impregnation of steel reinforced concrete. Unit Size: 25ltr

A 1-part, cementitious, polymer modified coating material used as bonding primer and reinforcement corrosion protection. It contains recycled waste materials which leads to a reduced carbon footprint compared to an equivalent performing mortar. Unit Size: 25kg

A one component cement based polymer modified general purpose repair and reprofiling mortar, meeting the requirements of Class R3 of BS EN 1504-3. Unit Size: 25kg bag

A 1-part, cementitious polymer modified, low shrinkage surfacing/ finishing mortar. It contains recycled waste materials and can reduce the carbon footprint application activity calculations. Unit Size: 25kg

A 1-part, cementitious, fibre reinforced, low shrinkage repair mortar. It contains recycled waste materials and can reduce the carbon footprint application activity calculations. Unit Size: 25kg bag

A 1-component, fibre reinforced, low shrinkage repair mortar meeting the requirement of class-R4 of EN 1504-3. Unit Size: 25kg

A cement based, one component flowable repair mortar (High Flow) containing shrinkage compensators and high range water-reducing agents, meeting the requirements of Class R4 of BS EN 1504-3. Unit Size: 25kg bag

A one component cement based polymer modified high build repair and reprofiling mortar, meeting the requirements of Class R3 of BS EN1504-3. Unit Size: 25kg bag

A one component fast setting cementitious repair mortar, meeting the requirements of Class R4 of BS EN 1504-3. Unit Size: 25kg bag

A high solids, one part, clear sodium silicate based liquid to cure, harden and seal fresh or hardened concrete. Unit Sizes: 205ltr

A high solids, one part, clear sodium silicate based liquid to cure, harden and seal fresh or hardened concrete. Unit Sizes: 25 ltr

A one part flowable shrinkage compensated general purpose cementitious grout. Meets the requirements of EN 1504-6: Anchoring of reinforcing bars. Unit Size: 25kg bag

A 1-part, cementitious, fast hardening free flowing grout which is shrinkage compensated and achieves high early and final strengths. Unit Size: 25kg bag

A 1-component, very rapid-setting, early-strength gaining, magnesium phosphate-based patching and repair mortar for concrete. Unit Size: 22.7kg

Weber-Tec Bedding Mortar is a polyester-based mortar consisting of three 3 components used for fixing manhole frames, airport landing lights, duct frames and precast concrete units. Formulated for easy mixing and placement which provides a durable, chemically resistant bedding and fixing material. Unit Size: 25kg bucket consisting of 3 parts.

Adoplug is a cementitious repair, sealing and wall tie filling mortar. Unit Size: 8kg

Ardex Ardurapid A 45 is a rapid drying and hardening slump free mortar for internal repairs. The mixed mortar sets after 15 minutes and can be trafficked after just 90 minutes regardless of thickness at 20°C.

Unit Size: 11kg