Search
Order hotline: 0844 800 2464
Email: sales@preconproducts.co.uk
- Categories
- Home Page
- My Account
- Concrete Accessories
- Ground & Slab Accessories
- Concrete Chemicals
- Formwork & Accessories
- Reinforcement
- Concrete Repair & Grout
-
Waterproofing
- Gas Protection
- Safety & Protection Products
- Flooring
- Ground Stabilisation
- Tools and Fixings
- Brickwork
- Expansion
- Sealing and Bonding
- News & Resources
Concrete Repair & Grout
FOSROC LOKFIX E55S 300ml CARTRIDGE
Fosroc Lokfix E55S is a two component vinyl-ester anchoring material, supplied in single component cartridges with a static mixer nozzle.
When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates.
Unit Size: 300ml
When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates.
Unit Size: 300ml
Stock Status:
Out of stock
£293.15 excl tax
FOSROC LOKFIX E75 APPLICATOR GUN
Applicator gun for Lokfix E75
Unit Size: Each
Stock Status:
Out of stock
£58.74 excl tax
FOSROC LOKFIX E77 585ml CARTRIDGE (sold by cartridge)
Fosroc Lokfix E77 is a two-component epoxy anchoring material, supplied in 3:1 ratio side-by-side cartridges with a static mixer nozzle.
When applied it sets and cures to firmly secure a variety of steel fixings into concrete and solid masonry substrates.
Unit Size: 385ml
When applied it sets and cures to firmly secure a variety of steel fixings into concrete and solid masonry substrates.
Unit Size: 385ml
Stock Status:
Out of stock
£30.89 excl tax
FOSROC LOKFIX S25 2.5Ltr BLUE LID
Fosroc Lokfix S25 is a two component polyester anchoring grout supplied in pre-measured quantities.
The material cures quickly to give consistent, high performance anchorages.
It is a pourable grade, with a 25 minute gel time at 20°c for use in vertical down holes where the hole is 8 to 40mm greater in diameter than the bar.
Unit Size: 2.5ltr
The material cures quickly to give consistent, high performance anchorages.
It is a pourable grade, with a 25 minute gel time at 20°c for use in vertical down holes where the hole is 8 to 40mm greater in diameter than the bar.
Unit Size: 2.5ltr
Stock Status:
Out of stock
£66.38 excl tax
FOSROC NITOBOND AR 5LTR
Fosroc Nitobond AR is a modified acrylic emulsion which is specially designed for use as a bonding aid, curing agent and gauging liquid for cementitious systems.
It is resistant to hydrolysis and can therefore be used for external application.
Unit Size: 5ltr
It is resistant to hydrolysis and can therefore be used for external application.
Unit Size: 5ltr
Stock Status:
66 in stock
£112.58 excl tax
FOSROC NITOBOND EP 4.5KG (2 PART)
Fosroc Nitobond EP is a 100% solids solvent-free epoxy resin containing pigments and fine filler.
It is supplied as a two-part material in pre-weighed quantities ready for on-site mixing and use.
Coloured components, white base and green hardener, provide visual evidence that adequate mixing is achieved.
Unit Size: 4.5kg
It is supplied as a two-part material in pre-weighed quantities ready for on-site mixing and use.
Coloured components, white base and green hardener, provide visual evidence that adequate mixing is achieved.
Unit Size: 4.5kg
Stock Status:
73 in stock
£161.11 excl tax
FOSROC NITOBOND EP STD 2.5KG 2PART
Fosroc Nitobond EP is a 100% solids solvent-free epoxy resin containing pigments and fine filler.
It is supplied as a two-part material in pre-weighed quantities ready for on-site mixing and use.
Coloured components, white base and green hardener, provide visual evidence that adequate mixing is achieved.
Unit Size: 2.5kg
It is supplied as a two-part material in pre-weighed quantities ready for on-site mixing and use.
Coloured components, white base and green hardener, provide visual evidence that adequate mixing is achieved.
Unit Size: 2.5kg
Stock Status:
43 in stock
£88.86 excl tax
FOSROC NITOBOND HAR 5 LTR
Fosroc Nitobond HAR is a modified acrylic emulsion specially designed for use as a bonding aid and gauging liquid for cementitious systems.
Unit Size: 5 ltr
Unit Size: 5 ltr
Stock Status:
51 in stock
£115.34 excl tax
FOSROC NITOCOTE CM210 GREY (2 Part Product)
Fosroc Nitocote CM210 is a flexible two-component polymer cementitious coating, used for waterproofing water retaining structures and water excluding structures.
Unit Size: 18.2kg bag powder component, 5kg liquid polymer component
Available in grey and white.
Unit Size: 18.2kg bag powder component, 5kg liquid polymer component
Available in grey and white.
Stock Status:
188 in stock
£132.11 excl tax
FOSROC NITOCOTE CM210 WHITE (2 Part Product)
Fosroc Nitocote CM210 is a flexible two-component polymer cementitious coating, used for waterproofing water retaining structures and water excluding structures.
Unit Size: 18.2kg bag powder component, 5kg liquid polymer component
Available in grey and white.
Unit Size: 18.2kg bag powder component, 5kg liquid polymer component
Available in grey and white.
Stock Status:
45 in stock
£132.11 excl tax
FOSROC NITOCOTE EP405 BLUE
Fosroc Nitocote EP405 is a high build epoxy coating, non-toxic for application to damp surfaces.
Unit Size: 2.5kg packs
Unit Size: 2.5kg packs
Stock Status:
Out of stock
£141.48 excl tax
FOSROC NITOCOTE EP405 WHITE
Fosroc Nitocote EP405 is a high build epoxy coating, non-toxic for application to damp surfaces.
Unit Size: 2.5kg packs
Unit Size: 2.5kg packs
Stock Status:
46 in stock
£141.48 excl tax
FOSROC NITOFIL LV (2x1.5 ltr Pack)
Fosroc Nitofill LV is a low viscosity system for the injection of cracks between 0.3mm and 9mm wide in concrete and masonry, where both sides of the crack can be sealed to prevent resin drainage.
Unit Size: 3 ltr pack (2 x 1.5ltr units each consisting of base & hardener)
Unit Size: 3 ltr pack (2 x 1.5ltr units each consisting of base & hardener)
Stock Status:
48 in stock
£178.35 excl tax
FOSROC NITOFILL TH ( 1 Ltr) 2 Parts
Fosroc Nitofill TH is a thixotropic epoxy resin injection grout developed for the injection of cracks 0-.5 to 9mm wide in concrete and masonry, and has been specially formulated to minimise the drainage of resin from cracks which are incompletely sealed.
Unit Size: 1 ltr pack
Unit Size: 1 ltr pack
Stock Status:
Out of stock
£124.03 excl tax
FOSROC NITOKIT ACCESSORY PACK
Fosroc Nitokit Accessory pack contains an injection gun, plastic bucket, goggles and 5.5L nitokit surface sealant.
Unit Size: pack
Unit Size: pack
Stock Status:
2 in stock
£209.88 excl tax
FOSROC NITOKIT LV (INCLUDES BELOW) (12 CARTRIDGES, 30 NIPPLES, 6 HOSES, 4 AIR RELEASE PINS)
Fosroc Nitokit LV is a low viscosity system suitable for surface cracks down to 0.2mm and internal cracks to 0.1mm. Self contained pack containing cartridges, nipples, hoses and air release pins.
Unit Size: pack
Unit Size: pack
Stock Status:
1 in stock
£694.57 excl tax
FOSROC NITOKIT SURFACE SEALER 5.5L
Fosroc Nitokit Surface Sealant is a two part filled epoxy used to seal over the cracks in structural materials such as concrete.
Unit Size: 5.5ltr
Unit Size: 5.5ltr
Stock Status:
5 in stock
£101.82 excl tax
FOSROC NITOKIT TH BASIC PACK
Fosroc Nitokit TH is a thixotropic system which can be injected into open ended cracks. Depth and quantity of resin need to be controlled and minimum crack width is 2mm.
Unit Size: pack
Unit Size: pack
Stock Status:
Out of stock
£694.57 excl tax
FOSROC NITOMORTAR HB (INDUSTRIAL)
Fosroc Nitomortar HB high build epoxy mortar is based on a high performance solvent-free epoxy resin system.
The special lightweight filler is specifically designed to give excellent 'hanging' properties for vertical and overhead work.
Unit Size: 9.3kg pack
The special lightweight filler is specifically designed to give excellent 'hanging' properties for vertical and overhead work.
Unit Size: 9.3kg pack
Stock Status:
Out of stock
£214.22 excl tax
FOSROC NITOMORTAR PE 14 KILO PACK
Fosroc Nitomortar PE is a resin jointing and repair compound, based on a polyester resin system, for general purpose use.
Unit Size: 14kg
Unit Size: 14kg
Stock Status:
1 in stock
£104.74 excl tax
FOSROC NITOMORTAR PE RESIN 2.7kg
Fosroc Nitomortar PE is a resin jointing and repair compound, based on a polyester resin system, for general purpose use.
Unit Size: 2.7kg can only
Unit Size: 2.7kg can only
Stock Status:
11 in stock
£133.12 excl tax
FOSROC NITOMORTAR S INDUSTRIAL 16KG
Fosroc Nitomortar S is a high strength epoxy mortar, based on a high qaulity solvent-free epoxy resin system.
The special silica aggregates provide high strength and excellent abrasion resistance.
Unit Size: 16kg
The special silica aggregates provide high strength and excellent abrasion resistance.
Unit Size: 16kg
Stock Status:
20 in stock
£114.57 excl tax
FOSROC NITOPRIME ZINC RICH 1.9 Ltr
Fosroc Nitoprime Zincrich is an anti-corrosion primer for exposed steel reinforcement, for use with Fosroc concrete repair mortars.
Unit Size: 1.9ltr and 800ml cans
Unit Size: 1.9ltr and 800ml cans
Stock Status:
45 in stock
£97.06 excl tax
.png)
.png)
Payment options
