GCP Preprufe 160R is unique composite sheets comprised of a thick HDPE film, pressure sensitive adhesive, and weather resistant protecting coating.
Unit Size: Roll
GCP Preprufe 160 Flex is a pre-applied flexible waterproof membrane that develops an adhesive bond to poured concrete for irregular permanent formwork.
Unit Size: 1.2m x 35m roll
GCP Preprufe 300R is unique composite sheets comprised of a thick HDPE film, pressure sensitive adhesive, and weather resistant protecting coating.
Unit Size: Roll
GCP Preprufe 800PA LT is an advanced, self-adhesive Preprufe Membrane for protection of below ground structures. Preprufe 800PA Low Temperature (LT) Membrane for low temperature applications when surface and ambient temperatures are between -5°C and 20°C.
Unit Size: 1.2m x 35m roll
GCP Preprufe Tape is a reinforced pressure sensitive tape incorporating Preprufe coating for continuous concrete adhesion at taped edges and details. Preprufe Tape LT is for temperatures between -5°c and 30°C.
Unit Size: 100mm x 15m roll
GCP Bituthene Primer S2 is a rubber-based primer in solvent, specially formulated to provide good initial adhesion, for use with the Bituthene range of cold applied, self adhesive waterproof membranes.
Unit Size: 25 ltr can
GCP Bituthene Primer S2 is a rubber-based primer in solvent, specially formulated to provide good initial adhesion, for use with the Bituthene range of cold applied, self adhesive waterproof membranes.
Unit Size: 5 ltr can
GCP Preprufe SC1 Primer is a non-bituminous, quick drying, damp and green concrete tolerant, solvent based primer for use with Preprufe 800PA cold applied, self-adhesive waterproof membrane.
Unit Size: 20 litre can
GCP Serviseal AT 240 is an important advance in concrete joint protection which combines Active Technology with the conventional mechancial properties of PVC waterstops, developed for water exclusing and retaining structures such as basements, reservoirs, sewage treatment works etc.
Unit Size: 7.5 m long coil
GCP Slipstrip 2 is low capacity bearing slips made from dense extruded polyethylene sheet for fixed end rotation joints or as a low friction, structural slip membrane.
Unit Size: 300mm wide, 1.5mmn thick x 25m rolls
GCP Bituthene Primer W2 is a water-based surface conditioner specially formulated to prepare concrete, masonry and wood surfaces for the systems. Primer W2 is a low VOC water-based alternative primer for all GCP post-applied membranes.
Unit Size: 5 litre can
Juta GP Primer is a quick drying, cold applied bituminous solution designed to penetrate and seal porous surfaces prior to the application of covering materials.
Unit Size: 5 ltr and 25 ltr
Juta GP Primer is a quick drying, cold applied bituminous solution designed to penetrate and seal porous surfaces prior to the application of covering materials.
Unit Size: 5 ltr and 25 ltr
JUTA GP Titanbond Edge Strip is a specially designed narrow width roll of the GP Titanbond for use on kicker details, or transitions areas from horizontal to vertical.
Unit Size: 1m x 25m
Juta Hydrolock is a mechanically bonded Geosynthetic Clay Liner (GCL) composite of pulverised bentonite embedded between two layers of geotextile.
The internal 5kg of natural sodium bentonite swells in contact with water to form a low permeability waterproofing barrier.
Unit Size: 1.15m x 5.1m