Waterproofing

A one part flowable shrinkage compensated general purpose cementitious mortar for waterproofing applications. Unit Size: 25kg

Sika Plaster Plugs can be used with Sika mesh membrane systems and have a serrated head which can take plaster or dot and dab.

.

Sika®-1 Pre-bag Render Mortar is part of the Sika® 1 Pre-Bagged Structural Waterproofing System. Unit Size: 25kg

Sika®-1 Pre-bag Spritz Mortar is part of the Sika® 1 Pre Bagged Structural Waterproofing System. Unit Size: 25kg

Sika® Brick plugs are 10mm fixings to use with membrane systems, with the advantage of a rubber seal already attached. Unit Size: 200 per box

A 2-part epoxy based thixotropic adhesive for bonding the Sikadur-Combiflex® SG modified flexible Polyolefin (FPO) waterproofing tapes to different substrates. Unit Size: 6kg (A+B)

BASF Masterseal 930 is a joint waterproofing bandage and epoxy resin adhesive. Unit Size: 200 x 1mm x 20m

A one-component, crack-bridging, fibre-reinforced mortar, based on cement modified with special alkali-resistant polymers. Unit Size: 20kg bag

A two component, solvent free, highly elastic, low odour polyurea hybrid waterproofing membrane. Unit Size: 25kg (Part A= 9.2kg, Part B=15.8kg)

A two part, elastic, 100% solids, very fast curing and coloured Polyurethane/ Polyurea-Hybrid liquid applied membrane with moderate chemical resistance. Unit Size: Part A=211kg, Part B=202kg

A two part, elastic, 100 % solids, very fast curing and coloured pure polyurea liquid applied membrane with good chemical resistance. Unit Size: Part A=212kg, Part B=191kg

A two-component, low odour, rapid curing, high solids, PUA/PU hybrid primer for consistent and durable adhesion of Sikalastic® Systems on cement based substrates. Unit Sizes: 4.5ltr (Part A=3.48ltr, Part B=1.02ltr)

A two-component, anticorrosive primer for exposed metal substrates and blocking primer over bituminous felts and coatings. Unit Size: 5ltr (Part A=2.5ltr, Part B=2.5ltr)

A two-component, low odour, rapid curing, high solids, PUA/PU hybrid primer for consistent and durable adhesion of Sikalastic® Systems on cement based substrates. Unit Sizes: 11.5ltr (Part A=8.89ltr, Part B=2.61ltr)

An embossed polyolefin FPO sheet membrane for pre-applied fully bonded below ground waterproofing of reinforced concrete structures. Unit Sizes: 1m x 20m

An embossed polyolefin FPO sheet membrane for pre-applied fully bonded below ground waterproofing of reinforced concrete structures. Unit Sizes: 2m x 20m This product is not purchasable on the website. Please call or email to place your order.

A preformed L-shaped SikaProof® A membrane sheet in 1.0 m width folded in 50/50 cm with a self-adhesive strip on both sides for a faster and easier application of perimeter edges, corners and connections. Unit Size: 1m x 20m

A fully bonded, composite sheet membrane waterproofing system for reinforced concrete structures. It consists of an embossed polyolefin (FPO) based membrane laminated with a unique sealant and a non-woven fleece with a self-adhesive strip on the longitudinal side for the overlap. Unit Sizes: 1m x 30m

A fully bonded, composite sheet membrane waterproofing system for reinforced concrete structures. It consists of an embossed polyolefin (FPO) based membrane laminated with a unique sealant and a non-woven fleece with a self-adhesive strip on the longitudinal side for the overlap. Unit Sizes: 2m x 30m This product is not purchasable on the website. Please call or email to place your order.

An embossed polyolefin FPO sheet membrane for pre-applied fully bonded below ground waterproofing of reinforced concrete structures. Unit Sizes: 1m x 25m

An embossed polyolefin FPO sheet membrane for pre-applied fully bonded below ground waterproofing of reinforced concrete structures. Unit Sizes: 2m x 25m This product is not purchasable on the website. Please call or email to place your order.

A preformed L-shaped SikaProof® A membrane sheet in 1.0 m width folded in 50/50 cm with a self-adhesive strip on both sides for a faster and easier application of perimeter edges, corners and connections. Unit Size: 1m x 25m

A self-adhesive tape based on a butyl adhesive for external jointing and detailing on SikaProof® A & P membrane systems. The tape is composed of a yellow carrier film and a divided release liner. Unit Size: Length 20m x Width 150mm

A double-sided, self-adhesive tape based on a butyl rubber adhesive covered with a release liner Unit Size: 50mm x 20m

A flexible polyolefin (FPO) self-adhesive sheet membrane. Designed to be used for post-applied fully bonded below ground waterproofing of existing reinforced concrete structures. Unit Size: 1m x 20m

A single-sided, self-adhesive tape based on SikaProof® membrane, laminated with a butyl adhesive covered with a release liner. Unit Size: 200mm x 20m

A synthetic rubber based, solvent-dispersed, primer for use as an integral component of the SikaProof®/ SikaBits® self-adhesive sheet membrane waterproofing systems. Unit Sizes: 12.5kg

A synthetic rubber based, solvent-dispersed primer. Designed to be used as an integral component of the SikaProof®/ SikaBits® self-adhesive sheet membrane waterproofing systems. Unit Sizes: 5kg

A self‐adhesive tape, based on a polyacrylate adhesive on a yellow carrier film coated with the SikaProof A fully bonded system. Unit Sizes: 150mm x 25m roll

A rectangular acrylic sealing profile. It swells in contact with water to seal all types of construction joints and penetrations in concrete structures. Unit Size: 20mm x 5mm x 20m

A rectangular acrylic sealing profile. It swells in contact with water to seal all types of construction joints and penetrations in concrete structures. Unit Size: 20mm x 10mm x 10m

An acrylic sealing ring profile. It swells in contact with water to seal spacer bars / tie bars / tie rods. Unit Size: Internal Diameter=18mm, External diameter=20mm

An acrylic sealing ring profile. It swells in contact with water to seal spacer bars / tie bars / tie rods. Unit Size: Internal Diameter=26mm, External diameter=28mm

An acrylic sealing ring profile. It swells in contact with water to seal spacer bars / tie bars / tie rods. Unit Size: Internal Diameter=43mm, External diameter=45mm

A 1-part polyurethane hydrophilic sealant which swells in contact with water to seal all types of construction joints and penetrations in concrete structures. Unit Size: 600ml

A two part polymer modified cementitious waterproof mortar slurry comprising of a liquid polymer and a cement based mix incorporating special admixtures. Unit Sizes: 25kg (20kg bag & 5kg pail)

Triton Aqua Channel is part of a cavity drain system and designed to be used in conjunction with Platon cavity drain membranes. Unit Size: 2m

Visqueen Ultimate Double Sided Jointing Tape is a double sided butyl based compound with an oversize quick release fm. Unit Size: 100mm x 15m roll

A blend of high-grade silicates and wetting agents, held in suspension with water as a carrier. Unit Size: 25kg drums

A grey, single component liquid damp proof and waterproof membrane. Unit Size: 20kg tins

A clear, single component polyurethane based primer. Unit Size: 4kg tin

A two component system both supplied in the same tin. The first component (Part A) is a bitumen-extended polyurethane fluid (15kg). The second component (Part B) is an accelerator hardener (0.6kg). Unit Size: 15.6kg

A PVC moulded drainage conduit, which should be fitted around the periphery of an internal floor at the vulnerable wall/floor junction. . Any water entering the building through walls or curved softs is controlled behind the membrane and enters the channel through the pre-drilled 19mm holes before being diverted to the mechanical (sump and pump) or natural drainage point. Unit Size: 2m lengths, 80mm wide, 50mm deep

A small PVC moulded connector piece to link two lengths of CD Channel.

A PVC moulded unit used to provide cleaning, inspection, and maintenance access to the water channel system.

A single sided butyl rubber self adhesive tape. Unit Size: 150mm x 10m

Visqueen EcoMembrane DPM is manufactured from a minimum 90% recycled polyethylene. Unit Sizes: 0.3mm x 4m x 25m roll, 0.5mm x 4m x 12.5m

A flexible black plastic strip, 2m long, 25mm high and 2mm thick. The strip is pre-drilled at 150mm centres with 8mm diameter holes (13 holes per strip). The strip are supplied individually.

Visqueen Gas Resistant Self Adhesive Membrane is a foil lined modifed bitumen rubber membrane with a self adhesive coating protected by a removable polyethylene release flm. Unit Size: 1m x 20m

A heavy duty, traditional DPC and cavity tray system manufactured with a polyester reinforced carrier, rubber modifed bituminous coating and surfaced on both sides with a fne silica sand. Unit Size: Supplied in 8m length rolls 1000mm wide

A heavy duty, traditional DPC and cavity tray system manufactured with a polyester reinforced carrier, rubber modifed bituminous coating and surfaced on both sides with a fne silica sand. Unit Size: Supplied in 8m length rolls 450mm wide

A heavy duty, traditional DPC and cavity tray system manufactured with a polyester reinforced carrier, rubber modifed bituminous coating and surfaced on both sides with a fne silica sand. Unit Size: Supplied in 8m length rolls 600mm wide

A robust co-polymer thermoplastic membrane, 0.5mm thick, yellow in colour. Unit Size: 4m x 12.5m center folded roll

A black elastomeric bituminous priming solution. Unit Size: 5ltr tin

Swellable hydrophilic polymer waterstops. Manufactured from thermoplastic synthetic rubber, the products are lightweight and highly flexible. Unit Size: 10m long strips, 20mm wide and 10mm high.

Swellable hydrophilic polymer waterstops. Manufactured from thermoplastic synthetic rubber, the products are lightweight and highly flexible. Unit Sizes: IGW5 Waterstop = 10m long strips, 20mm wide and 5mm high.

A crystalline waterproofing admixture powder consisting of a blend of specially selected chemicals. When combined with ready mix concrete at batching plant, it produces a crystalline reaction which enhances water resistance and durability of the cured concrete. Unit Size: A tub consisting of six 4.1 kg soluble bags and used in the ratio of 1:1 i.e. one 4.1kg bag for each 1m³ of concrete.

A swellable hydrophilic polymer waterstop. Manufactured from thermoplastic synthetic rubber, the product is lightweight and highly flexible. The strap is coloured orange for ease of recognition. Visqueen IGW Pipe Strap is supplied in packs of 5 straps.

Visqueen Masonry Plugs are made from Polyoxymethylene (10mm diameter and 75mm in length) Unit Size: 100 per box

A fexible stainless steel strip, 1240mm long, 25mm high, with 8mm pre-drilled holes spaced at 150mm centres. There are 9 holes per strip and the strips are supplied in packs of 17 items. Unit Size: 21m pk

A flexible 0.6mm composite damp proof course and cavity tray system. It is supplied in 20m rolls and available in a wide-variety of widths. Unit Size: 450mm x 20m roll

A flexible 0.6mm composite damp proof course and cavity tray system. It is supplied in 20m rolls and available in a wide-variety of widths. Unit Size: 500mm x 20m roll

A flexible 0.6mm composite damp proof course and cavity tray system. It is supplied in 20m rolls and available in a wide-variety of widths. Unit Size: 600mm x 20m roll

A flexible 0.6mm composite damp proof course and cavity tray system. It is supplied in 20m rolls and available in a wide-variety of widths. Unit Size: 700mm x 20m roll

A flexible 0.6mm composite damp proof course and cavity tray system. It is supplied in 20m rolls and available in a wide-variety of widths. Unit Size: 800mm x 20m roll

Aa flexible 0.6mm composite damp proof course and cavity tray system. It is supplied in 20m rolls and available in a wide-variety of widths. Unit Size: 900mm x 20m roll

A grey cementitious compound containing portland cement, graded quartz sands, aggregates and chemical additives. Unit Size: 25kg tin

A 1mm thick, robust co-extruded waterproofng membrane. It is coloured grey on the upper surface and black on the reverse. The grey surface is textured to aid adhesion to cast concrete. Unit Size: 2.44m x 41m

A single sided high strength aluminium tape coated with a high bond acrylic adhesive and a removable release flm protecting the adhesive coating. Unit Size: 75mm x 15m

A modifed bitumen rubber membrane with a self adhesive coating protected by a removable polyethylene release flm. It is dark grey on the upper surface. Unit Size: 1m x 20m roll

A modifed bitumen rubber tanking membrane. It has a sanded fnish to the top surface and a heat dispersible flm on the underside. Unit Size: 1m x 8m roll

Visqueen UDG Corner Units (unit dimension 150mm x 150mm x 150mm) should be positioned at the external corners of the crate system

Visqueen Urban Drainage Geomembrane is a 100% recycled polyethylene geomembrane, black in colour, 0.5mm thick and supplied in multi folded rolls. Unit Size: 4m x 12.5m

Visqueen High Performance Urban Drainage Geomembrane is a robust thermoplastic geomembrane, black in colour, 1mm thick and supplied in single wound rolls (not folded). Unit Size: 1.4m x 50m

Visqueen Ultimate Gas DPC utilises Visqueen's Advanced Barrier Technology. The DPC is a 0.5mm thick, flexible 7 layer co-extruded film providing volatile organic compound (VOC) and ground gas resistance. The DPC has an embossed/debossed fnish, is coloured gold/white and can be installed with either surface facing upwards. Unit Size: 20m x 500mm rolls

Visqueen Ultimate Gas DPC utilises Visqueen's Advanced Barrier Technology. The DPC is a 0.5mm thick, flexible 7 layer co-extruded film providing volatile organic compound (VOC) and ground gas resistance. The DPC has an embossed/debossed fnish, is coloured gold/white and can be installed with either surface facing upwards. Unit Size: 20m x 600mm rolls

Visqueen Ultimate Gas DPC utilises Visqueen's Advanced Barrier Technology. The DPC is a 0.5mm thick, flexible 7 layer co-extruded film providing volatile organic compound (VOC) and ground gas resistance. Unit Size: 600mm x 20m

Visqueen Ultimate Gas DPC utilises Visqueen's Advanced Barrier Technology. The DPC is a 0.5mm thick, flexible 7 layer co-extruded film providing volatile organic compound (VOC) and ground gas resistance. The DPC has an embossed/debossed fnish, is coloured gold/white and can be installed with either surface facing upwards. Unit Size: 750mm X 20m roll

Visqueen Ultimate Gas DPC utilises Visqueen's Advanced Barrier Technology. The DPC is a 0.5mm thick, flexible 7 layer co-extruded film providing volatile organic compound (VOC) and ground gas resistance. Unit Size: 850mm x 20m

Visqueen Ultimate Gas DPC utilises Visqueen's Advanced Barrier Technology. The DPC is a 0.5mm thick, flexible 7 layer co-extruded film providing volatile organic compound (VOC) and ground gas resistance. The DPC has an embossed/debossed fnish, is coloured gold/white and can be installed with either surface facing upwards. Unit Size: 900mm X 20m roll

A 1.0mm thick high density polyethylene (HDPE) profiled sheet with approximate 20 mm high studs . Unit Size: 2m x 20m roll

A double-sided butyl rubber tape. Unit Size: 10mm x 5m - 2 per box

A double-sided butyl rubber tape Unit Size: 25mm x 20m

A 0.5mm thick high density polyethylene (HDPE) profiled sheet with approximate 7 mm high studs. Unit Size: roll of 2.07m x 20m with a 70mm flange edge on one side to aid jointing

A high performance sodium bentonite and butyl rubber. Unit Size: The waterstop bar is 20mm x 25mm x 5m long

A swellable high performance, one component, of-white polyurethane adhesive supplied in 310ml cartridges. Unit Size: 310ml

A double sided butyl based compound with an oversize quick release flm. Unit Size: 100mm x 15m

A white, flame retardant, flexible sealant supplied in 380ml cartridges. Unit Size: 380ml

Wykamol CM20 is a high capacity waterproofing membrane

Unit Size: 2mx20m roll

Ardex DPM 1 C can be applied to protect the floor covering installation from residual construction moisture and ground bearing moisture. Unit Size: 25kg

Flexcrete Cementitious Coating 851 is a two component, polymer modified, cementitious waterproof coating for internal or external structural waterproofing of concrete and other mineral substrates.

Unit Size: 30kg composite packs, 2 part product

A reuseable metal sleeve to be used as part of the Proofex EFS range. Unit Size: Each

IKO-Pro SA Bitumen Primer is a fast drying rubber modified bituminous priming solution used to prepare substrates for application self-adhesive bitumen waterproofing membranes.

Unit Size: 25L