Waterproofing

A thixotropic, polymer modified, cement based, waterproof, engineering quality fairing coat. Unit Size: 20kg

A thixotropic, polymer modified, cement based, waterproof, rapid hardening, high build repair mortar. Unit Size: 20kg

A two component, polymer modified, flexible, cement based, waterproof coating for concrete and masonry. Unit Size: 20kg

An advanced, elastomeric, highly tear resistant, breathable, waterproof composite tape. Unit Size: 120mm wide x 10m long roll

A two component, polymer modified, cement based, waterproof coating for concrete and masonry. Unit Size: 15kg (two part)

A multi-functional, water based primer/curing agent, formulated on an aqueous acrylic copolymer. Unit Size: 5ltr bottle

A aromatic hydrocarbon solvent; Contains Xylene. Unit Size: 5 ltr tin

A cold applied combination of impermeable high density polyethylene sheet and permeable geotextile filter fabric. Unit Size: 2m x 20m long rolls This product is not purchasable on the website. Please call or email to place your order.

.

A two pack solvent free polymer modified epoxide coating which cures to give a continuous tough but flexible waterproof coating. Unit Size: 5kg (2-part)

A two pack solvent free polymer modified epoxide coating which cures to give a continuous tough but flexible waterproof coating. Unit Size: 5kg (2-part)

A two-pack solvent free black liquid modified epoxide surface conditioner that can be applied to damp surfaces. Unit Size: 5ltr or 15 ltr (2-part)

A two-pack solvent free black liquid modified epoxide surface conditioner that can be applied to damp surfaces. Unit Size: 5ltr or 15 ltr (2-part)

A two pack solvent free polymer modified epoxide coating which cures to give a continuous tough but flexible waterproof coating. Unit Size: 20kg (2-part)

A cold applied, high density polyethylene film bonded to aluminium foil and coated with bitumen/rubber self adhesive layer with a removable reinforced silicone release paper. Unit Size: 1m x 20m long

A cold applied, high density polyethylene film bonded to aluminium foil and coated with bitumen/rubber self adhesive layer with a removable reinforced silicone release paper. Unit Size: 300mm x 20m

RIW Granules are chemically treated sodium bentonite granules, which are used as a detailing accessory product, with the Structureseal system. Unit Size: 20kg bag

A cold applied, bitumen based coating, which dries to form a uniform UV resistant and waterproof layer. The coating is a fibre and mineral filled solution of natural and petroleum bitumens in white spirit. Unit Size: 20 ltr

A cold applied, fast drying, two coat black bitumen coating, which dries to form a water and water vapour barrier. Unit Sizes: 25 ltr and 205 ltr

A cold applied, fast drying, two coat black bitumen coating, which dries to form a water and water vapour barrier. Unit Sizes: 25 ltr and 205 ltr

.

A crystalline grout used to create an internal or external waterstop at construction joints, pipe penetrations, tie-holes and control joints. Unit Size: 25kg

A cementitious crystalline slurry that is applied to horizontal and vertical construction joints to provide additional waterproofing protection, and protect rebar from corrosion. Unit Size: 25kg

.

KIM contains Krystol technology, when added to concrete, Krystol chemically reacts with water and dehydrated cement particles to form insoluble needle-shaped crystals that fill capillary pores and micro-cracks in the concrete and block the pathways for water and waterborne contaminants. Unit Size: 8kg Bags

RIW Krytonite Adhesive is specially designed to adhere Krytonite Swelling Waterstop to concrete construction joints and penetrations that require waterproofing. Krytonite Adhesive has incredible bonding strength, even on damp concrete surfaces and can be used in all seasons. Unit Size: 290ml

A synthetic rubber waterstop that uses swelling pressure to seal concrete construction joints and stops water. Unit Size: 10m roll

A two coat, cold applied damp proof membrane, which dries to a uniform gloss black finish. The coating is a solution of natural and petroleum bitumens in white spirit. Unit Sizes: 25 ltr

A two coat, cold applied damp proof membrane, which dries to a uniform gloss black finish. The coating is a solution of natural and petroleum bitumens in white spirit. Unit Sizes: 5 ltr and 25 ltr

Pre-fabricated 'top-hat' sections for use around incoming pipes. Unit Size: 110mm diameter, 130mm diameter, 160mm diameter

Pre-fabricated 'top-hat' sections for use around incoming pipes. Unit Size: 110mm diameter, 130mm diameter, 160mm diameter

Pre-fabricated 'top-hat' sections for use around incoming pipes. Unit Size: 110mm diameter, 130mm diameter, 160mm diameter

.

A flat sheet, made of organic fibres saturated with bitumen. The board is resistant to water, ground salts and most corrosive chemicals. Unit Size: 3mm x 900mm x 2020

RIW R20 Cavity Drain is manufactured from 1mm thick black high density polyethylene with studs approximately 20mm high. Unit Size: 2m wide x 20m long

RIW Cavity Drain R7 is manufactured from 0.5mm translucent virgin high density polyethylene with studs approximately 8mm high. Unit Size: 2m wide x 20m long

A trowel-grade, sodium bentonite/butyl-rubber based sealant, designed for use with the Structureseal system. Unit Size: 15 ltr tub

A cold applied, high density polyethylene film, coated with a bitumen/rubber self adhesive layer with a removable reinforced silicone paper. Unit Sizes: 150mm x 20m long 300mm x 20m long

A cold applied, high density polyethylene film, coated with a bitumen/rubber self adhesive layer with a removable reinforced silicone paper. Unit Sizes: 150mm x 20m long 300mm x 20m long

RIW Sheetseal Primer is a bitumen solution. Unit Size: 5 ltr, 25ltr

RIW Sheetseal Primer is a bitumen solution. Unit Size: 5 ltr, 25ltr

A high performance polymeric material, available in widths from 100mm to 1000mm, supplied in rolls 20m long. Unit Size: Length 20m long rolls Widths (various available) 100,150, 225, 300, 375, 450, 600, & 1000mm

A high performance polymeric material, available in widths from 100mm to 1000mm, supplied in rolls 20m long. Unit Size: Length 20m long rolls Widths (various available) 100,150, 225, 300, 375, 450, 600, & 1000mm

A high performance polymeric material, available in widths from 100mm to 1000mm, supplied in rolls 20m long. Unit Size: Length 20m long rolls Widths (various available) 100,150, 225, 300, 375, 450, 600, & 1000mm

A high performance polymeric material, available in widths from 100mm to 1000mm, supplied in rolls 20m long. Unit Size: Length 20m long rolls Widths (various available) 100,150, 225, 300, 375, 450, 600, & 1000mm

A high performance polymeric material, available in widths from 100mm to 1000mm, supplied in rolls 20m long. Unit Size: Length 20m long rolls Widths (various available) 100,150, 225, 300, 375, 450, 600, & 1000mm

A high performance polymeric material, available in widths from 100mm to 1000mm, supplied in rolls 20m long. Unit Size: Length 20m long rolls Widths (various available) 100,150, 225, 300, 375, 450, 600, & 1000mm

A high performance polymeric material, available in widths from 100mm to 1000mm, supplied in rolls 20m long. Unit Size: Length 20m long rolls Widths (various available) 100,150, 225, 300, 375, 450, 600, & 1000mm

A high performance polymeric material, available in widths from 100mm to 1000mm, supplied in rolls 20m long. Unit Size: Length 20m long rolls Widths (various available) 100,150, 225, 300, 375, 450, 600, & 1000mm

A solvent free polymer modified epoxide coating, supplied as a two part pack of base and hardener in pre-measured proportions. Unit Sizes: 5ltr & 20ltr packs (two part product) Grey or Black

A solvent free polymer modified epoxide coating, supplied as a two part pack of base and hardener in pre-measured proportions. Unit Sizes: 5ltr

A solvent free polymer modified epoxide coating, supplied as a two part pack of base and hardener in pre-measured proportions. Unit Sizes: 5ltr & 20ltr packs (two part product) Grey or Black

A solvent free polymer modified epoxide coating, supplied as a two part pack of base and hardener in pre-measured proportions. Unit Sizes: 5ltr & 20ltr packs (two part product) Grey or Black

A bitumen/rubber self-adhesive tape for use over Toughseal when reinforcing joints etc internally, prior to tiling. Unit Size: 100mm wide x 20m long roll

A self-adhesive vinyl tape. Unit Size: 48mm wide rolls x 50m long

A sodium bentonite based material designed to stop water infiltration through insitu concrete construction joints. Unit Size: 25 x 19mm, supplied in 5m long coils

.

A normal setting liquid waterproofing admixture for mortar and concrete. Unit Sizes: 25 ltr

A normal setting liquid waterproofing admixture for mortar and concrete. Unit Sizes: 5ltr and 25 ltr

An extra-quick setting liquid waterproofing admixture that causes almost immediate setting and very rapid hardening of Ordinary Portland Cement. Unit Size: 5ltr

Sika 4 Rapid Setting is used to aid the quick setting of cement based renders and concretes where low water pressure or slow moving water exists. Unit Size: 5 ltr

A rapid setting waterproofing admixture, which when mixed with ordinary Portland cement and water, sets rapidly to seal areas of severe water infiltration through concrete, rock or masonry. Unit Size: 5ltr

The Sika Bentoshield Fixing Nose Piece is designed to support the washer on the end of the gun and hold it in place for safe and correct fixing of the Sika Bentoshield membrane system. Unit Size:

Sika Bentoshield fixing washers are special plastic washers used to fix Sika Bentoshield membrane to vertical surfaces and horizontal laps. Unit Size:

Sika Bentoshield Granules are polymer modified natural sodium bentonite granules, when wetted these granules form a dense waterproof paste. Unit Size: 25kg

A self healing waterproofing membrane that is resistant to contaminated soils, forming an automatic mechanical bond to freshly poured concrete. Unit Size: 1.1m x 5m rolls

A single component mastic consisting of polymer modified natural sodium bentonite and further polymer additives. Trowel applied and thixotropic in nature. Unit Size: 15ltr

A galvanised steel bonding strip with 5mm holes at 15mm centres in a solid plastic holder. Unit Size: 12mm wide x 10m long x 1mm thick

A bitumen solution to be used in conjunction with Sika BituSeal S-115. Unit Sizes: 25ltr, 5ltr

A bitumen solution to be used in conjunction with Sika BituSeal S-115. Unit Sizes: 25ltr, 5ltr

A post applied self-adhesive waterproofing sheet membrane. It is based on a top layer of polyethylene film bonded to a layer of bitumen/polymer adhesive carried on a release paper, with a selvedge strip. Unit Size: 1.05m x 19.05m

A blend of high-grade silicates and wetting agents, held in suspension with water as a carrier. Once applied to the concrete surface, this unique product seals the concrete surface. Unit Size: 25kg

The Sika Cavity Drainage System Corner Piece is installed at the corners of a perimeter drainage channel system to allow continuity of the drainage system.

The Sika Cavity Drainage System Channel T Piece is installed at the junction between wall and cross channel drainage system to allow continuity of the drainage system.

A 150mm wide tape which has many uses but is mostly used to seal membrane from walls to floors and the channel system. Tacky on one side only, this can also be used to overtape external joints and used on floor oversealing. Unit Size: 150mm x 20m

.

A 10mm bead of butyl rope, which is used to either wrap around the head of plugs in membrane installation, or to form a jointing waterproof seal on walls and floor membrane systems. Unit Size: 10mm wide x 5m long

A PVC drainage conduit for the control of water ingress in below ground waterproofing situations. It has a flange upstand and is fitted around the perimeter of the floor at the vulnerable wall to floor junction, directly any ingress of water towards a sump chamber or drain. Unit Size: each

A drainage outlet that can be used to get water from the channels to the sump chamber or existing drain. The angle bend on the underside of the channel takes water through a 32mm connection.

A flexible waterproofing tape based on modified flexible Polyolefin (FPO) with advanced adhesion properties. It has red masking tape on one side for easier application over expansion joits. Unit Size: 1 roll of 25m length Varying widths available: 10, 20, 30cm

A flexible waterproofing tape based on modified flexible Polyolefin (FPO) with advanced adhesion properties. It has red masking tape on one side for easier application over expansion joits. Unit Size: 1 roll of 25m length Varying widths available: 10, 20, 30cm

A flexible waterproofing tape based on modified flexible Polyolefin (FPO) with advanced adhesion properties. It has red masking tape on one side for easier application over expansion joits. Unit Size: 1 roll of 25m length, thickness 1mm Varying widths available: 10, 20, 30cm

A flexible waterproofing tape based on modified flexible Polyolefin (FPO) with advanced adhesion properties. It has red masking tape on one side for easier application over expansion joints. Unit Size: 25m long x 2mm thick x 200mm width

A 2 part, polyurea/polyurethane-hybrid primer for cementitious substrates. The rapid curing performance allows overcoating of Sika Liquid Applied Membrane (LAM) roofing systems after 30 minutes. Unit Size: 11.5ltr (Part A=9ltr, Part B=2.5ltr)

A one part polymer modified cement based waterproof coating comprising of special cement based components and admixtures. When mixed with water a slurry or mortar material is produced for direct application to a variety of construction substrates. Unit Size: 25kg bag

A flexible waterproofing tape on polyvinyl chloride (PVC) with advanced adhesion properties. The tape seals construction and connection joints on concrete or metal substrates. Unit Sizes: 1.6mm thickness x 30m length x 220mm width

A high density polyethylene (HDPE), heavy duty drainage and protection sheet with 10mm high dimples on the bottom layer and a bonded geotextile (PP) filtration layer on the top layer. Unit Size: 2,44m width x 12,50m length

Sika 1 Finishing Mortar is part of the Sika 1 Pre-Bagged Structural Waterproofing System. These special mortars are pre-bagged kiln dried blends of specially graded aggregates and cements, with waterproofing admixtures, packaged in 4 grades at the appropriate mix ratios for optimum application performance and durability. Unit Size: 25kg

The Sika flexible jetting eye has been designed to allow cleaning of the channel system and also an inspection port. The unique flexible upstand jetting point can be easily bent to allow the channel to be used in a wall port system. It also has the benefit of allowing slabs to be laid whilst still being easily accessible afterwards.

The Sika Fuko Injection Junction Box can be installed in concrete construction joints to waterproof them and also to seal any cracks or voids in the joint areas. Unit Size: Box of 5

A re-injectable hose for sealing various construction and connection joints in watertight concrete structures. Unit Size: Supplied as a Combi-pack in a cardboard box containing: ▹ 200m SikaFuko VT 1 ▹ 10m green PVC-hose (inlet) ▹ 10m white PVC-hose (outlet) ▹ Accessories: (2m connecting pipe, 4m heat shrink sleeve, x 50 closure plugs, 1 can of glue, 1 roll of tape, x 800 fasttening clips)

A high-density polyethylene, high capacity cavity drainage membrane. Unit Size: 2m x 20m long

A 1-part, polymer modified, ready to use bitumen emulsion primer. Unit Size: 10 ltr

A 2 component polymer modified bituminous flexible thick coating extended with fibre for waterproofing against dampness and moisture ingress. Unit Size: 32kg (Part A-Liquid=24kg, Part B-Powder=8kg)