Cetco Aquadrain ICD 20mm is the highest drainage capacity membrane in the Aquadrain ICD range giving a void volume of 14 litres/m².
Unit Size: 2.0m x 20m*
*including flat overlapping edge (flange) without studs, working area ca. 40m²
Cetco Aquadrain ICD 8mm is a medium capacity drainage membrane (4 litres/m²) for floors and walls both above and below ground level.
Unit Size: 2.07m x 20m*
*including flat overlapping edge (flange) without studs, working area ca. 40m²
Cetco Cetbit 300 is a self-adhering waterproofing membrane consisting of 1.4mm of rubberised bitumen integrally bonded to a 0.1mm cross-laminated HDPE protective film. These two components combine to offer an extremely effective waterproofing barrier with a factory controlled thickness to ensure uniform application.
Unit Size:
Roll Width 1m, Roll Length 20m, Roll Area 20 sqm, Roll Weight 32kg
Cetco DS30 Butyl Tape is a double-sided high-tack butyl tape, used for sealing inside GB-600 membrane overlaps as applicable.
Unit Size: 30mm wide x 30lnm roll
Cetco SS80 Seamtape is a synthetic rubber-based general purpose preformed strip sealant with laminated polyester film.
Colour: White
Unit Size: 80mm x 35m rolls.
Cetco Cetseal is a multi-purpose, single component polyether moisture cure sealant/adhesive.
Cetseal is a low VOC, 100% solids, non-shrinking product with excellent UV resistance.
Unit Size: 290ml cartridge
Cetco Coredisc is a nominal 100mm (4") round x 1.5mm (60 mil) thcik non-reinforced thermoplastic disc.
Coredisc is also resistant to most forms of fungus, algae and micro-biolocial attack.
Unit Size: 100 Corediscs per box.
Cetco Coreflash NR is a nominal 1.5mm thick non-reinforced solid white thermoplastic flashing membrane with excellent UV, tear, puncture and flame resistance.
Coreflash NR is also resistant to most forms of fungus, algae and micro-biological attack.
Unit Size: 1.55m x 12.9m rolls
Cetco Coreflash UV is a nominal 1.5mm thick reinforced thermoplastic flashing membrane with excellent UV, tear, puncture and flame resistance.
Coreflash UV is also resistant to most forms of fungua, algae and microbiological attack.
Unit Size: 1.55m x 12.9m rolls
Cetco Coreflex Universal Corners are preformed injection molded thermoplastic flashings that will accommodate inside and outside corner details of any dimension.
Coreflex Universal Corners come in one size, in one piece and can be trimmed to fit the appropriate condition.
Cetco Coreflex XP is a 1.5mm nominal thermoplastic membrane reinforced with a 90 gram/sqm polyester reinforcing scrim integrally bonded to an XP Technology Core.
Unit Size:1.7m x 12.9m rolls; 1.55m wide thermoplastic membrane with XP Technology Core offset by 150mm along the long roll edge.
Cetco CS-300 is a highly penetrative solution specially formulated to react with hydrated cement both at the surface and to a depth of up to 15mm.
Unit Size: 25ltr
Cetco Hydrofix 600 is a single part, rapid curing, modified polyurethane waterproofing membrane that can be applied directly to dry concrete surfaces.
Unit Size: 15ltr drum
Cetco Maxbit SKW is a cold applied bitumen rubber compound designed for excellent adhesion of Swelltite membranes to structural substrates and as a damp-proof coating.
Unit Size: 20kg pails
Cetco Waterstop RX101 is a hydrophilic strip waterstop designed to stop water infiltration through cast-in-place concrete construction joints by expanding upon contact with water to form a positive seal against the concrete.
Waterstop RX101 is produced in a rectangular shape measuring 25x20mm
Cetco Waterstop RX103 is a hydrophilic strip waterstop designed to stop water infiltration through cast-in-place concrete construction joints by expanding upon contact with water to form a positive seal against the concrete.
Waterstop RX103 is produced in a rectangular shape measuring 15x10mm.
Cetco Seal XXP is trowel-grade mastic designed for a variety of surface preparation and detailing work with Ultraseal XP and other Cetco active waterproofing membranes.
Unit Size: 15kg pail