Waterproofing

The Triton Aqua Outlet Pipe clips on to the end of the Aquachannel run and provides conversion to 50mm solvent weld ABS waste pipe. Used with gravity fed drainage or as one of at least two connections to a sump.

The Triton Aqua Channel Connector is a simple connector piece to formly hold together lengths of Aquachannel

Triton Aqua Channel is part of a cavity drain system and designed to be used in conjunction with Platon cavity drain membranes. Unit Size: 2m

Extra hard nails for use with the Trak-It C5 gas fixing tool. Unit Size: Sold per box, 700 in a box

Trak-It C5 Fuel cells are spare fuel cells to power the Trak-It C5 gas fixing tool. Each fuel cell contains enough gas to install over 800 fasteners. Unit Size: each

Heydi Powder is a plugging compound which rapidly hardens when exposed to water. Unit Size: 5kg

A two part polymer modified cementitious waterproof mortar slurry comprising of a liquid polymer and a cement based mix incorporating special admixtures. Unit Sizes: 25kg (20kg bag & 5kg pail)

A 1-part polyurethane hydrophilic sealant which swells in contact with water to seal all types of construction joints and penetrations in concrete structures. Unit Size: 600ml

An acrylic sealing ring profile. It swells in contact with water to seal spacer bars / tie bars / tie rods. Unit Size: Internal Diameter=43mm, External diameter=45mm

An acrylic sealing ring profile. It swells in contact with water to seal spacer bars / tie bars / tie rods. Unit Size: Internal Diameter=26mm, External diameter=28mm

An acrylic sealing ring profile. It swells in contact with water to seal spacer bars / tie bars / tie rods. Unit Size: Internal Diameter=18mm, External diameter=20mm

A rectangular acrylic sealing profile. It swells in contact with water to seal all types of construction joints and penetrations in concrete structures. Unit Size: 20mm x 10mm x 10m

A rectangular acrylic sealing profile. It swells in contact with water to seal all types of construction joints and penetrations in concrete structures. Unit Size: 20mm x 5mm x 20m

A fast curing, non-swelling, 1-part adhesive with very high initial grab which bonds most common construction substrates. Can be used for adhering SikasSwell® Profiles within construction joints. Unit Size: 600ml sausage

A self-adhesive tape, with a carrier film and release liner, for internal jointing of Sikaproof A+ waterproofing system. Unit Size: 25m roll

A self‐adhesive tape, based on a polyacrylate adhesive on a yellow carrier film coated with the SikaProof A fully bonded system. Unit Sizes: 150mm x 25m roll

A double-sided adhesive overlap tape based on a polyacrylic adhesive sandwiched between release liners. Unit Size: Each

A synthetic rubber based, solvent-dispersed primer. Designed to be used as an integral component of the SikaProof®/ SikaBits® self-adhesive sheet membrane waterproofing systems. Unit Sizes: 5kg

A synthetic rubber based, solvent-dispersed, primer for use as an integral component of the SikaProof®/ SikaBits® self-adhesive sheet membrane waterproofing systems. Unit Sizes: 12.5kg

A single-sided, self-adhesive tape based on SikaProof® membrane, laminated with a butyl adhesive covered with a release liner. Unit Size: 200mm x 20m

A flexible polyolefin (FPO) self-adhesive sheet membrane. Designed to be used for post-applied fully bonded below ground waterproofing of existing reinforced concrete structures. Unit Size: 1m x 20m

A double-sided, self-adhesive tape based on a butyl rubber adhesive covered with a release liner Unit Size: 50mm x 20m

A self-adhesive tape based on a butyl adhesive for external jointing and detailing on SikaProof® A & P membrane systems. The tape is composed of a yellow carrier film and a divided release liner. Unit Size: Length 20m x Width 150mm

A preformed L-shaped SikaProof® A membrane sheet in 1.0 m width folded in 50/50 cm with a self-adhesive strip on both sides for a faster and easier application of perimeter edges, corners and connections. Unit Size: 1m x 25m

An embossed polyolefin FPO sheet membrane for pre-applied fully bonded below ground waterproofing of reinforced concrete structures. Unit Sizes: 2m x 25m This product is not purchasable on the website. Please call or email to place your order.