Waterproofing

A heavy duty, traditional DPC and cavity tray system manufactured with a polyester reinforced carrier, rubber modifed bituminous coating and surfaced on both sides with a fne silica sand. Unit Size: Supplied in 8m length rolls 600mm wide

A heavy duty, traditional DPC and cavity tray system manufactured with a polyester reinforced carrier, rubber modifed bituminous coating and surfaced on both sides with a fne silica sand. Unit Size: Supplied in 8m length rolls 450mm wide

A heavy duty, traditional DPC and cavity tray system manufactured with a polyester reinforced carrier, rubber modifed bituminous coating and surfaced on both sides with a fne silica sand. Unit Size: Supplied in 8m length rolls 1000mm wide

Visqueen Gas Resistant Self Adhesive Membrane is a foil lined modifed bitumen rubber membrane with a self adhesive coating protected by a removable polyethylene release flm. Unit Size: 1m x 20m

A flexible black plastic strip, 2m long, 25mm high and 2mm thick. The strip is pre-drilled at 150mm centres with 8mm diameter holes (13 holes per strip). The strip are supplied individually.

Visqueen EcoMembrane DPM is manufactured from a minimum 90% recycled polyethylene. Unit Sizes: 0.3mm x 4m x 25m roll, 0.5mm x 4m x 12.5m

Visqueen EcoMembrane DPM is manufactured from a minimum 90% recycled polyethylene. All rolls are supplied multi folded. Unit Size: 4m x 25m

A single sided butyl rubber self adhesive tape. Unit Size: 150mm x 10m

A PVC moulded unit used to provide cleaning, inspection, and maintenance access to the water channel system.

A small PVC moulded connector piece to link two lengths of CD Channel.

A PVC moulded drainage conduit, which should be fitted around the periphery of an internal floor at the vulnerable wall/floor junction. . Any water entering the building through walls or curved softs is controlled behind the membrane and enters the channel through the pre-drilled 19mm holes before being diverted to the mechanical (sump and pump) or natural drainage point. Unit Size: 2m lengths, 80mm wide, 50mm deep

A two component system both supplied in the same tin. The first component (Part A) is a bitumen-extended polyurethane fluid (15kg). The second component (Part B) is an accelerator hardener (0.6kg). Unit Size: 15.6kg

A clear, single component polyurethane based primer. Unit Size: 4kg tin

A grey, single component liquid damp proof and waterproof membrane. Unit Size: 20kg tins

A blend of high-grade silicates and wetting agents, held in suspension with water as a carrier. Unit Size: 25kg drums

Visqueen Ultimate Double Sided Jointing Tape is a double sided butyl based compound with an oversize quick release fm. Unit Size: 100mm x 15m roll

Triton TT Super is applied to the surface of concrete or concrete blinding to provide in-depth waterproof protection by blocking the movement of moisture through capillaries and hairline cracks. Unit Size: 25kg

Used to form a seal between separate P8 membrane drops. Unit Size: 2mmx30mmx20m

Used to form a seal around the neck of the Platon Brick Plug and the membrane when the plug is driven home into the substrate. Unit Size: 5m

Triton Platon P20 Cavity Drain is a high capacity drainage membrane recommended for use on all floor applications below ground due to its ability to control free flowing water. Unit Size: 2m x 20m x 20mm roll

Required for the installation of Platon P8 membrane.

Drainage and protection cavity membrane used externally against retaining walls and across terraces and podiums. Unit Size: 2m x 15m x 7mm roll