Waterproofing

Cetco CS-300 is a highly penetrative solution specially formulated to react with hydrated cement both at the surface and to a depth of up to 15mm. Unit Size: 25ltr

.

Cetco Coreflex XP is a 1.5mm nominal thermoplastic membrane reinforced with a 90 gram/sqm polyester reinforcing scrim integrally bonded to an XP Technology Core. Unit Size:1.7m x 12.9m rolls; 1.55m wide thermoplastic membrane with XP Technology Core offset by 150mm along the long roll edge.

Cetco Coreflex Universal Corners are preformed injection molded thermoplastic flashings that will accommodate inside and outside corner details of any dimension. Coreflex Universal Corners come in one size, in one piece and can be trimmed to fit the appropriate condition.

.

Cetco Coreflash UV is a nominal 1.5mm thick reinforced thermoplastic flashing membrane with excellent UV, tear, puncture and flame resistance. Coreflash UV is also resistant to most forms of fungua, algae and microbiological attack. Unit Size: 1.55m x 12.9m rolls

Cetco Coreflash NR is a nominal 1.5mm thick non-reinforced solid white thermoplastic flashing membrane with excellent UV, tear, puncture and flame resistance. Coreflash NR is also resistant to most forms of fungus, algae and micro-biological attack. Unit Size: 1.55m x 12.9m rolls

Cetco Coredisc is a nominal 100mm (4") round x 1.5mm (60 mil) thcik non-reinforced thermoplastic disc. Coredisc is also resistant to most forms of fungus, algae and micro-biolocial attack. Unit Size: 100 Corediscs per box.

Cetco Cetseal is a multi-purpose, single component polyether moisture cure sealant/adhesive. Cetseal is a low VOC, 100% solids, non-shrinking product with excellent UV resistance. Unit Size: 290ml cartridge

Cetco SS80 Seamtape is a synthetic rubber-based general purpose preformed strip sealant with laminated polyester film. Colour: White Unit Size: 80mm x 35m rolls.

Cetco DS30 Butyl Tape is a double-sided high-tack butyl tape, used for sealing inside GB-600 membrane overlaps as applicable. Unit Size: 30mm wide x 30lnm roll

Cetco Cetbit 300 is a self-adhering waterproofing membrane consisting of 1.4mm of rubberised bitumen integrally bonded to a 0.1mm cross-laminated HDPE protective film. These two components combine to offer an extremely effective waterproofing barrier with a factory controlled thickness to ensure uniform application. Unit Size: Roll Width 1m, Roll Length 20m, Roll Area 20 sqm, Roll Weight 32kg

Cetco Aquadrain ICD 8mm is a medium capacity drainage membrane (4 litres/m²) for floors and walls both above and below ground level. Unit Size: 2.07m x 20m* *including flat overlapping edge (flange) without studs, working area ca. 40m²

Cetco Aquadrain ICD 20mm is the highest drainage capacity membrane in the Aquadrain ICD range giving a void volume of 14 litres/m². Unit Size: 2.0m x 20m* *including flat overlapping edge (flange) without studs, working area ca. 40m²

CD Flexible Jetting Eye for maintenance access L: 200mm H: 106mm D: 85mm Jetting Eye: 150-250mm

CD Channel outlet to 38mm pipe L: 200mm H: 106mm D: 85mm + outlet

CD Channel to encourage collected water to sump chambers or gravity fed outlets. L: 2m H: 106mm D: 85mm

For the reinforcement of angles, corners and joints underneath ARDEX WPM 200 Solvent Free Multi Purpose Epoxide Liquid Waterproof Membrane. Unit : Each

Ardex WPM 200 provides a surface applied water and vapour barrier or priming layer to concrete, screeded, rendered or masonry surfaces, steel and other vertical as well as horizontal hard surfaces. Unit Size: 5ltr

Ardex WPM 200 provides a surface applied water and vapour barrier or priming layer to concrete, screeded, rendered or masonry surfaces, steel and other vertical as well as horizontal hard surfaces. Unit Size: 20ltr

Ardex WPM 200 provides a surface applied water and vapour barrier or priming layer to concrete, screeded, rendered or masonry surfaces, steel and other vertical as well as horizontal hard surfaces. Unit Size: 5ltr