Waterproofing

A reinforcing mesh for use in conjunction with Proofex LM for angles and pipe penetrations etc. Unit Size: 100mm x 50m

A two component bituminous liquid membrane for waterproofing of underground structures and intricate details in conjunction with Proofex waterproofing systems. Unit Size: 28kg pack

A 10m long x 250mm wide section of polyethylene with 2butyl selvedge strips. It is used by bending at 90° along its length for application between horizontal and vertical membrane to provide waterproofing continuity and it also connects with internal and external corner pieces. Proofex L section is supplied with a butyl "closure" strip at each end. Unit Size: 125mm x 125mm x 10m

A 125mm corner piece made from polyethylene membrane with a 100mm butyl selvedge for use in conjuction with Proofex L Section.

A 125mm corner piece made from polyethylene membrane with a 100mm butyl selvedge for use in conjuction with Proofex L Section.

A reinforced, double sided waterproof adhesive tape for sealing and jointing roll ends, cut edges and corner pieces. Unit Size: 200mm x 10m x 1.5mm

A robust, pre-applied, fully bonded, gas-resistant, waterproofing membrane for use in below ground, reinforced concrete structures. Unit Size: 1.27m x 30m

A two-component, fast-setting, flexible and tough epoxy system. Unit Size: 6 x 560ml sachet units (includes 3 static mixers)

Fosroc Cavitydrain membranes are manufactured from chemically resistant high density polyethylene in a range of stud depths designed to permit high water flow through a permanent void formed against a substrate. Fosroc Proofex Cavitydrain 80 is a space saving solution for vertical applications in conjunction with internal blockwork walls and dry lining systems. Unit Size: 2.07m x 20m

Fosroc Proofex Angle Fillets are strips fixed at all floor and wall junctions with a 6mm bead of Nitoseal MB175.

A high performance methane, radon and carbon dioxide resisting, self-adhesive waterproof membrane for basements and below ground structures. It incorporates an aluminium layer and a polymer modified bitumen compound on a high strength polymer backing film. Unit Size: 1m x 20m

A cold applied, flexible, high performance waterproofing and radon barrier membrane, incorporating a cross laminated HDPE carrier film with a polymer modified bitumen compound. Unit Size: 1m x 20m

A 600ml gun to be used as part of the Proofex EFS range. Unit Size: Each

A reuseable metal sleeve to be used as part of the Proofex EFS range. Unit Size: Each

Flexcrete Cemprotec Elastic is an elastomeric, cementitious modified, polymer-rich coating which maintains its flexibility under permanent immersion and when exposed externally.

Unit Size: 30kg

.

Flexcrete Cemprotec E942 incorporates the benefits of copolymer and epoxy resin technologies into a water based cementitious system to give a hard, durable coating with excellent resistance to water, chloride ions, oxygen and aggressive chemicals.

Unit Size: 30kg

Flexcrete Cementitious Coating 851 is a two component, polymer modified, cementitious waterproof coating for internal or external structural waterproofing of concrete and other mineral substrates.

Unit Size: 30kg composite packs, 2 part product

Cetco Bentoseal is trowel-grade, sodium bentonite/butyl-rubber based mastic designed for a variety of surface preparation and waterproof detailing work with select Cetco waterproofing membranes. Unit Size: 15kg Pail

Cetco Waterstop XP is an Expanding Waterstop for Concrete Construction Joints Unit Size: 10mm x 15mm x 6m roll