Waterproofing

Juta GP Titantech DPC is a unique single layer, embossed high performance, gas and hydrocarbon resistant DPC. Unit Size: 900mm x 20m

JUTA GP Titanbond Edge Strip is a specially designed narrow width roll of the GP Titanbond for use on kicker details, or transitions areas from horizontal to vertical. Unit Size: 1m x 25m

Juta GP Primer is a quick drying, cold applied bituminous solution designed to penetrate and seal porous surfaces prior to the application of covering materials. Unit Size: 5 ltr and 25 ltr

Juta GP Primer is a quick drying, cold applied bituminous solution designed to penetrate and seal porous surfaces prior to the application of covering materials. Unit Size: 5 ltr and 25 ltr

Juta GP Crystalline Active Barrier (CAB) Flex 2C is a two-component, fast drying waterproofing coating system. Component A is a cement-based powder and Component B is a liquid polymer. Due to the polymer CAB Flex 2C is semi-flexible. Unit Size: 33kg units (25kg comp.A & 8kg comp. B)

IKO-Pro SA Bitumen Primer is a fast drying rubber modified bituminous priming solution used to prepare substrates for application self-adhesive bitumen waterproofing membranes.

Unit Size: 5L

IKO-Pro SA Bitumen Primer is a fast drying rubber modified bituminous priming solution used to prepare substrates for application self-adhesive bitumen waterproofing membranes.

Unit Size: 25L

IKO Synthaprufe is a blend of bitumen emulsion and synethic rubber latex used in damp proof structures, at or above ground level.

Unit Size: 25L

Hyload Tanking 2000SA a self adhesive modified bitumen sheet material used within a structural waterproofing system.

Unit Size: 1m x 15m rolls

Hyload Gastite is a cold applied self-adhesive membrane protecting structures against the ingress of moisture and methane radon gasses.

Unit Size: 1m x 20m rolls

GCP Bituthene Primer W2 is a water-based surface conditioner specially formulated to prepare concrete, masonry and wood surfaces for the systems. Primer W2 is a low VOC water-based alternative primer for all GCP post-applied membranes. Unit Size: 5 litre can

GCP Slipstrip 2 is low capacity bearing slips made from dense extruded polyethylene sheet for fixed end rotation joints or as a low friction, structural slip membrane. Unit Size: 300mm wide, 1.5mmn thick x 25m rolls

An economical low capacity, low friction bearing strip which can be used under in-situ or precast concrete slabs and beams, structural steelwork bearing plates and pipe support to form a thin sliding joint.

Unit Size: Roll

GCP Serviseal Exp Coil is a passive external PVC waterstop system manufactured in a range of sizes Unit Size: Each

GCP Serviseal AT 240 is an important advance in concrete joint protection which combines Active Technology with the conventional mechancial properties of PVC waterstops, developed for water exclusing and retaining structures such as basements, reservoirs, sewage treatment works etc. Unit Size: 7.5 m long coil

GCP Preprufe SC1 Primer is a non-bituminous, quick drying, damp and green concrete tolerant, solvent based primer for use with Preprufe 800PA cold applied, self-adhesive waterproof membrane. Unit Size: 20 litre can

GCP Bituthene Primer S2 is a rubber-based primer in solvent, specially formulated to provide good initial adhesion, for use with the Bituthene range of cold applied, self adhesive waterproof membranes. Unit Size: 5 ltr can

GCP Bituthene Primer S2 is a rubber-based primer in solvent, specially formulated to provide good initial adhesion, for use with the Bituthene range of cold applied, self adhesive waterproof membranes. Unit Size: 25 ltr can

GCP Preprufe Tape is a reinforced pressure sensitive tape incorporating Preprufe coating for continuous concrete adhesion at taped edges and details. Preprufe Tape LT is for temperatures between -5°c and 30°C. Unit Size: 100mm x 15m roll

GCP Preprufe 800PA LT is an advanced, self-adhesive Preprufe Membrane for protection of below ground structures. Preprufe 800PA Low Temperature (LT) Membrane for low temperature applications when surface and ambient temperatures are between -5°C and 20°C. Unit Size: 1.2m x 35m roll

GCP Preprufe 300R is unique composite sheets comprised of a thick HDPE film, pressure sensitive adhesive, and weather resistant protecting coating. Unit Size: Roll

GCP Preprufe 300 LT Plus is the latest generation of Preprufe membranes with the unique Preprufe ZipLap seam. Unit Size: Roll

GCP Preprufe 160 Flex is a pre-applied flexible waterproof membrane that develops an adhesive bond to poured concrete for irregular permanent formwork. Unit Size: 1.2m x 35m roll

GCP Preprufe 160R is unique composite sheets comprised of a thick HDPE film, pressure sensitive adhesive, and weather resistant protecting coating. Unit Size: Roll