Waterproofing

Juta GP Primer is a quick drying, cold applied bituminous solution designed to penetrate and seal porous surfaces prior to the application of covering materials. Unit Size: 5 ltr and 25 ltr

JUTA GP Titanbond Edge Strip is a specially designed narrow width roll of the GP Titanbond for use on kicker details, or transitions areas from horizontal to vertical. Unit Size: 1m x 25m

Juta GP Titantech DPC is a unique single layer, embossed high performance, gas and hydrocarbon resistant DPC. Unit Size: 900mm x 20m

Juta Hydrolock is a mechanically bonded Geosynthetic Clay Liner (GCL) composite of pulverised bentonite embedded between two layers of geotextile. The internal 5kg of natural sodium bentonite swells in contact with water to form a low permeability waterproofing barrier. Unit Size: 1.15m x 5.1m

Juta Hydrolock Paste is a plastic bentonite paste which is specifically designed for structural waterproofing. It is easy to use, has excellent water absorption capacity and is biologically harmless, weather resistant, solvent free and frost resistant. Unit Size: 25kg

Juta Hydrolock Rail is a galvanised steel wire mesh used for preventing displacement of the Hydrolock strip during concrete pouring. Unit Size: 30mm wide, 1m long

Juta Hydrolock Strip is a swellable bentonite joint sealing tape with crystallisation additives. Hydrolock Strip is used as a waterstop in concrete construction joints, and is tested and approved up to 7 bar water pressure. Unit Size: 5m x 20mm x 25mm

Juta PD1700 includes a high compressive strength Cuspate High Density Polyethylene (HDPE) Drainage core with a geotextile filter bonded to one side. It is designed as a high flow medium to alleviate hydrostatic pressure on below ground structures, as well as providing protection to the underlying membrane (gas/waterproofing). Unit Size: 8mm x 2m x 20m

Juta Pile Head Sealer is a crystalline cementitious waterproof slurry which creates a monolithic bond to the structure and seals the pile head. Unit Size: 20kg

Juta GP Titanflex gas and hydrocarbon barrier is a multi-layer, polyethylene membrane. It is specifically designed, manufactured, tested and certified to perform as a methane, carbon dioxide, radon ground gas, VOC, air moisture and hydrocarbon protection system. Unit Size: 0.5mm x 2m x 50m

Juta GP Titantank is a self adhesive version of the GP Titanflex; composed of self-adhesive with an upper surface finish of GP Titanflex, and a lower surface finish of siliconised polypropylene release film. Unit Size: 1.2mm x 0.9m x 20m

Juta GP Titantech DPC is a unique single layer, embossed high performance, gas and hydrocarbon resistant DPC. Unit Size: 1.3m x 20m

MasterLife WP 754 JT is a butyl rubber coated tape. Unit Size: 20m Roll

MasterLife WP 754 PC Tape is a double sided butyl tape which is used for Masterseal 754 pre-applied waterproofing applications at critical details and damaged areas. Unit Size: 100mm X 100m

Masterlife WP 754 is a post-applied sheet membrane waterproofing system consisting of a highly flexible polyolefin membrane with self adhesive backing. Unit Size: 1m x 20m

Masterlife WP 754 is a pre-applied sheet membrane waterproofing system consisting of highly flexible polyolefin membrane and a designed non-woven fleece. Unit Size: 1.6MM X 1.0M X 20M

MasterLife WP 754 RT is a waterproofing repair tape with butyl rubber coating. Unit Size: 200mm X 20m

Masterlife WP 910 Waterbar provides simple but efficient waterproofing of construction joints. Unit Size: 10m ROLL

Masterlife WP 912 Hydroswelling Mastic is a one-component, moisture curing pre-polymer which is reswellable when in contact with water. Unit Size: 310ml Cartridges

MasterSeal 583 Cement Based Slurry is a blend of Portland cements, selected aggregrates and spray dried polymer modifying agents. Unit Size: 25kg

Masterseal 590 when mixed with clean water, provides a ready to use rapid setting durable plugging mortar for active water leaks in concrete and masonry.

Unit Size: 25kg

Masterseal 590 when mixed with clean water, provides a ready to use rapid setting durable plugging mortar for active water leaks in concrete and masonry. Unit Size: 5kg

Minova CarboStop 102 is a water-reactive, CFC and solvent free, one-component polyurethane resin.

It is an easy to use way of stopping water inflow under high pressure.

Unit Size: Kit - consists of part A (102 20kg tin) & B (102 Acc 1kg tin)

Longseal 100 is a high-performance, CE certified, cold-applied waterproof membrane. Unit Size: 1m x 20m roll

Longseal 100 is a high-performance, CE certified, cold-applied waterproof membrane. Unit Size: 150mm x 20m roll

Longseal 100 is a high-performance, CE certified, cold-applied waterproof membrane. Unit Size: 300m x 20m roll

Petrolatum Tape provides anti-corrosion protection of gas, water, oil and other pipes, pipeline valves and fittings, structural steel pipework and any other exposed metal parts Unit Size: Roll

Petrolatum Tape provides anti-corrosion protection of gas, water, oil and other pipes, pipeline valves and fittings, structural steel pipework and any other exposed metal parts Unit Size: Roll

Petrolatum Tape provides anti-corrosion protection of gas, water, oil and other pipes, pipeline valves and fittings, structural steel pipework and any other exposed metal parts Unit Size: Roll

Power Flowstop Adhesive is a single-component solvent-free high-pressure adhesive for bonding of MASTERSTOP and FLOWSTOP swelling tapes. Unit Size: 310ml cartridge

A tough, high quality modified bituminous Protection Board for waterproofing insulation. Unit Size: 1m x 2m

PUDLO Membrane BW is a high strength waterproofing material, comprised of geotextiles and sodium bentonite

Unit Size: 1.1m X 5m

PUDLO Membrane Seal is a sodium bentonite/butyl rubber based mastic designed for a variety of surface preparation. When it comes into contact with water it swells to prevent water ingress.

Unit Size: 15kg tub

PUDLO Render Seal is a Type A cementitious ready mixed surface waterproofer.

Unit Size: 25kg

PUDLO Self Seal is a self-adhesive, high performance, cold applied waterproof membrane manufactured from tough HDPE film and a layer of rubber modified bitumen adhesive.

Unit Size: 1.05M X 19.05M

Surestop BWB is a red hydrophilic strip made of sodium bentonite and butyl rubber with a silicone-treated back paper.

Unit Size: 25x20mm X 5m

A cold applied, high density polyethylene film, coated with a bitumen/rubber self-adhesive layer with a removable reinforced silicone paper.

Unit Size: 1m x 20m roll

A double-sided butyl tape. Unit Size: 100mm wide rolls x 15m long

A double-sided bitumen/rubber self-adhesive tape with a removable silicone release paper one side and a thin polyethylene removable sheet on the other. Unit Size: 150mm wide rolls x 15m long

RIW Aqua Channel is pre-formed in a pentagonal shape, with pre-drilled 19mm holes at 70mm centres along its length. Aqua Channel is an internal peripheral PVC drainage conduit that has been specifically designed for the control of water ingress in below ground situations. Unit Size: 2m lengths

Used to join two pieces of Aqua Channel together.

Used at changes in direction of the Aqua Channel.

RIW Aqua Channel Outlet consists of a 90° bend, with a male coupling, which is fitted to the base of a 200mm length of Aqua Channel; allowing water to be taken from the channel to the water collection point.

.

.

Brick plugs fitted with watertight seal. Unit Size: Pack of 100

Unit Size: Roll

A thixotropic, polymer modified, cement based, waterproof, engineering quality fairing coat. Unit Size: 20kg

A thixotropic, polymer modified, cement based, waterproof, rapid hardening, high build repair mortar. Unit Size: 20kg

A two component, polymer modified, flexible, cement based, waterproof coating for concrete and masonry. Unit Size: 20kg

An advanced, elastomeric, highly tear resistant, breathable, waterproof composite tape. Unit Size: 120mm wide x 10m long roll

A two component, polymer modified, cement based, waterproof coating for concrete and masonry. Unit Size: 15kg (two part)

A multi-functional, water based primer/curing agent, formulated on an aqueous acrylic copolymer. Unit Size: 5ltr bottle

A aromatic hydrocarbon solvent; Contains Xylene. Unit Size: 5 ltr tin

A cold applied combination of impermeable high density polyethylene sheet and permeable geotextile filter fabric. Unit Size: 2m x 20m long rolls This product is not purchasable on the website. Please call or email to place your order.

.

A two pack solvent free polymer modified epoxide coating which cures to give a continuous tough but flexible waterproof coating. Unit Size: 5kg (2-part)

A two pack solvent free polymer modified epoxide coating which cures to give a continuous tough but flexible waterproof coating. Unit Size: 5kg (2-part)

A two-pack solvent free black liquid modified epoxide surface conditioner that can be applied to damp surfaces. Unit Size: 5ltr or 15 ltr (2-part)

A two-pack solvent free black liquid modified epoxide surface conditioner that can be applied to damp surfaces. Unit Size: 5ltr or 15 ltr (2-part)

A two pack solvent free polymer modified epoxide coating which cures to give a continuous tough but flexible waterproof coating. Unit Size: 20kg (2-part)

A cold applied, high density polyethylene film bonded to aluminium foil and coated with bitumen/rubber self adhesive layer with a removable reinforced silicone release paper. Unit Size: 1m x 20m long

A cold applied, high density polyethylene film bonded to aluminium foil and coated with bitumen/rubber self adhesive layer with a removable reinforced silicone release paper. Unit Size: 300mm x 20m

RIW Granules are chemically treated sodium bentonite granules, which are used as a detailing accessory product, with the Structureseal system. Unit Size: 20kg bag

A cold applied, bitumen based coating, which dries to form a uniform UV resistant and waterproof layer. The coating is a fibre and mineral filled solution of natural and petroleum bitumens in white spirit. Unit Size: 20 ltr

A cold applied, fast drying, two coat black bitumen coating, which dries to form a water and water vapour barrier. Unit Sizes: 25 ltr and 205 ltr

A cold applied, fast drying, two coat black bitumen coating, which dries to form a water and water vapour barrier. Unit Sizes: 25 ltr and 205 ltr

.

A crystalline grout used to create an internal or external waterstop at construction joints, pipe penetrations, tie-holes and control joints. Unit Size: 25kg

A cementitious crystalline slurry that is applied to horizontal and vertical construction joints to provide additional waterproofing protection, and protect rebar from corrosion. Unit Size: 25kg

.

KIM contains Krystol technology, when added to concrete, Krystol chemically reacts with water and dehydrated cement particles to form insoluble needle-shaped crystals that fill capillary pores and micro-cracks in the concrete and block the pathways for water and waterborne contaminants. Unit Size: 8kg Bags

RIW Krytonite Adhesive is specially designed to adhere Krytonite Swelling Waterstop to concrete construction joints and penetrations that require waterproofing. Krytonite Adhesive has incredible bonding strength, even on damp concrete surfaces and can be used in all seasons. Unit Size: 290ml

A synthetic rubber waterstop that uses swelling pressure to seal concrete construction joints and stops water. Unit Size: 10m roll

A two coat, cold applied damp proof membrane, which dries to a uniform gloss black finish. The coating is a solution of natural and petroleum bitumens in white spirit. Unit Sizes: 25 ltr

A two coat, cold applied damp proof membrane, which dries to a uniform gloss black finish. The coating is a solution of natural and petroleum bitumens in white spirit. Unit Sizes: 5 ltr and 25 ltr

Pre-fabricated 'top-hat' sections for use around incoming pipes. Unit Size: 110mm diameter, 130mm diameter, 160mm diameter

Pre-fabricated 'top-hat' sections for use around incoming pipes. Unit Size: 110mm diameter, 130mm diameter, 160mm diameter

Pre-fabricated 'top-hat' sections for use around incoming pipes. Unit Size: 110mm diameter, 130mm diameter, 160mm diameter

.

A flat sheet, made of organic fibres saturated with bitumen. The board is resistant to water, ground salts and most corrosive chemicals. Unit Size: 3mm x 900mm x 2020