Waterproofing

Minova CarboStop 102 is a water-reactive, CFC and solvent free, one-component polyurethane resin.

It is an easy to use way of stopping water inflow under high pressure.

Unit Size: Kit - consists of part A (102 20kg tin) & B (102 Acc 1kg tin)

Juta GP Crystalline Active Barrier (CAB) Flex 2C is a two-component, fast drying waterproofing coating system. Component A is a cement-based powder and Component B is a liquid polymer. Due to the polymer CAB Flex 2C is semi-flexible. Unit Size: 33kg units (25kg comp.A & 8kg comp. B)

Juta Hydrolock Rail is a galvanised steel wire mesh used for preventing displacement of the Hydrolock strip during concrete pouring. Unit Size: 30mm wide, 1m long

A fast curing, non-swelling, 1-part adhesive with very high initial grab which bonds most common construction substrates. Can be used for adhering SikasSwell® Profiles within construction joints. Unit Size: 600ml sausage

A flexible 0.6mm composite damp proof course and cavity tray system. It is supplied in 20m rolls and available in a wide-variety of widths. Unit Size: 300mm x 20m roll

A flexible 0.6mm composite damp proof course and cavity tray system. It is supplied in 20m rolls and available in a wide-variety of widths. Unit Size: 225mm x 20m roll

A flexible 0.6mm composite damp proof course and cavity tray system. It is supplied in 20m rolls and available in a wide-variety of widths. Unit Size: 150mm x 20m roll

A flexible 0.6mm composite damp proof course and cavity tray system. It is supplied in 20m rolls and available in a wide-variety of widths. Unit Size: 100mm x 20m roll

Febtank Plug, when mixed with clean water, provides a ready to use rapid-setting durable plugging compound for active leaks in masonry and concrete. Unit Size: 5kg

A polyolefin (FPO) based sheet membrane for pre-applied fully bonded below ground waterproofing of reinforced concrete structures. Unit Size: 2m x 20m

A polyolefin (FPO) based sheet membrane for pre-applied fully bonded below ground waterproofing of reinforced concrete structures. Unit Size: 1m x 20m

A double-sided adhesive overlap tape based on a polyacrylic adhesive sandwiched between release liners. Unit Size: Each

A self-adhesive tape, with a carrier film and release liner, for internal jointing of Sikaproof A+ waterproofing system. Unit Size: 25m roll

A polyolefin (FPO) based sheet membrane for below waterproofing of reinforced concrete structures. Unit Size: 2m x 25m roll

A polyolefin (FPO) based sheet membrane for below waterproofing of reinforced concrete structures. Unit Size: 1m x 25m roll

A single-sided adhesive tape. It consists of a butyl rubber adhesive that is covered with a release liner. Unit Size: 10m roll

.

.

.

.

.

Heydi Powder is a plugging compound which rapidly hardens when exposed to water. Unit Size: 5kg

Heydi Powder is a plugging compound which rapidly hardens when exposed to water. Unit Size: 15kg

Flexcrete Cementitious Coating 851 is a two component, polymer modified, cementitious waterproof coating for internal or external structural waterproofing of concrete and other mineral substrates.

Unit Size: 30kg composite packs, 2 part product

Surestop BWB is a red hydrophilic strip made of sodium bentonite and butyl rubber with a silicone-treated back paper.

Unit Size: 25x20mm X 5m

PUDLO Membrane BW is a high strength waterproofing material, comprised of geotextiles and sodium bentonite

Unit Size: 1.1m X 5m

PUDLO Render Seal is a Type A cementitious ready mixed surface waterproofer.

Unit Size: 25kg

PUDLO Membrane Seal is a sodium bentonite/butyl rubber based mastic designed for a variety of surface preparation. When it comes into contact with water it swells to prevent water ingress.

Unit Size: 15kg tub

PUDLO Self Seal is a self-adhesive, high performance, cold applied waterproof membrane manufactured from tough HDPE film and a layer of rubber modified bitumen adhesive.

Unit Size: 1.05M X 19.05M

Petrolatum Tape provides anti-corrosion protection of gas, water, oil and other pipes, pipeline valves and fittings, structural steel pipework and any other exposed metal parts Unit Size: Roll

Petrolatum Tape provides anti-corrosion protection of gas, water, oil and other pipes, pipeline valves and fittings, structural steel pipework and any other exposed metal parts Unit Size: Roll

Petrolatum Tape provides anti-corrosion protection of gas, water, oil and other pipes, pipeline valves and fittings, structural steel pipework and any other exposed metal parts Unit Size: Roll

Wykamol Tape is a high quality 28mm wide butyl double sided tape.

Unit Size: 28mm x 22.5m roll

Wykamol Surefix Plugs are fixings to apply cavity drain membranes to the walls of both above and below ground structures.

Unit Size: pack

Wykamol flexible jetting eye is designed to allow cleaning of the channel system and also as an inspection port.

Unit Size: each

Wykamol CM8 Geotextile membrane is a twin layered cavity drain membrane and non-woven geotextile fabric.

Unit Size: 2m x 20m roll

Wykamol Waterguard drainage outlet is used to get water from the channels to the sump chamber or existing drain.

Unit Size: Each

Wykamol Corner Strip is a tape used to seal membranes at walls and floors and to fix perimeter drainage channels in place.

Unit Size: 150mm x 20m roll

Wykamol CM8 Membrane is a waterproofing Membrane for use on walls, floors, vaults and tunnels with minimal surface preparation required.

Unit Size: 2m x 20m roll

Wykamol CM20 is a high capacity waterproofing membrane

Unit Size: 2mx20m roll

Wykamol Waterguard Channel is a PVC drainage conduit for the control of water ingress in below ground waterproofing situations.

Unit Size: 2 metres

A reuseable metal sleeve to be used as part of the Proofex EFS range. Unit Size: Each

A 600ml gun to be used as part of the Proofex EFS range. Unit Size: Each

Visqueen EcoMembrane DPM is manufactured from a minimum 90% recycled polyethylene. All rolls are supplied multi folded. Unit Size: 4m x 25m

Power Flowstop Adhesive is a single-component solvent-free high-pressure adhesive for bonding of MASTERSTOP and FLOWSTOP swelling tapes. Unit Size: 310ml cartridge

Triton TT Super is applied to the surface of concrete or concrete blinding to provide in-depth waterproof protection by blocking the movement of moisture through capillaries and hairline cracks. Unit Size: 25kg

Used to form a seal between separate P8 membrane drops. Unit Size: 2mmx30mmx20m

Used to form a seal around the neck of the Platon Brick Plug and the membrane when the plug is driven home into the substrate. Unit Size: 5m

Triton Platon P20 Cavity Drain is a high capacity drainage membrane recommended for use on all floor applications below ground due to its ability to control free flowing water. Unit Size: 2m x 20m x 20mm roll

Required for the installation of Platon P8 membrane.

Drainage and protection cavity membrane used externally against retaining walls and across terraces and podiums. Unit Size: 2m x 15m x 7mm roll

The Triton Aqua Outlet Pipe clips on to the end of the Aquachannel run and provides conversion to 50mm solvent weld ABS waste pipe. Used with gravity fed drainage or as one of at least two connections to a sump.

The Triton Aqua Channel Connector is a simple connector piece to formly hold together lengths of Aquachannel

Triton Aqua Channel is part of a cavity drain system and designed to be used in conjunction with Platon cavity drain membranes. Unit Size: 2m

Sika Screeding Mortar when mixed with water provides the multicoat components for the structural waterproofing systems Unit Size: 25kg bag

A mechanical plug specifically designed to seal the void formed in a concrete wall by the removal of a taper tie rod or pass through tie sleeve.

A galvanised metal sheet with a special coating applied on one side to increase its adhesion to fresh concrete Unit Size: 15m rolls

A highly flexible waterstop made from PVC/NBR copolymer for sealing expansion and construction joints in watertight concrete structures. Unit Size: Roll

Sika Tricosal BV DA240 is highly flexible waterstops made from PVC/NBR copolymer for sealing expansion and construction joints in watertight concrete structures. Unit Size: Roll

Extra hard nails for use with the Trak-It C5 gas fixing tool. Unit Size: Sold per box, 700 in a box

Trak-It C5 Fuel cells are spare fuel cells to power the Trak-It C5 gas fixing tool. Each fuel cell contains enough gas to install over 800 fasteners. Unit Size: each

Sikadrainage Membrane consists of molded high-density polyethylene and polypropylene membranes and fixing/sealing materials. Unit Size: Roll

A glass fibre mat reinforcement for Decothane and Sikalastic Liquid Applied Membrane Systems. Unit Size: Roll

.

Longseal 100 is a high-performance, CE certified, cold-applied waterproof membrane. Unit Size: 300m x 20m roll

Longseal 100 is a high-performance, CE certified, cold-applied waterproof membrane. Unit Size: 150mm x 20m roll

Longseal 100 is a high-performance, CE certified, cold-applied waterproof membrane. Unit Size: 1m x 20m roll

A tough, high quality modified bituminous Protection Board for waterproofing insulation. Unit Size: 1m x 2m

MasterSeal 583 Cement Based Slurry is a blend of Portland cements, selected aggregrates and spray dried polymer modifying agents. Unit Size: 25kg

MasterLife WP 754 RT is a waterproofing repair tape with butyl rubber coating. Unit Size: 200mm X 20m

MasterLife WP 754 PC Tape is a double sided butyl tape which is used for Masterseal 754 pre-applied waterproofing applications at critical details and damaged areas. Unit Size: 100mm X 100m

MasterLife WP 754 JT is a butyl rubber coated tape. Unit Size: 20m Roll

Masterlife WP 912 Hydroswelling Mastic is a one-component, moisture curing pre-polymer which is reswellable when in contact with water. Unit Size: 310ml Cartridges

Masterlife WP 910 Waterbar provides simple but efficient waterproofing of construction joints. Unit Size: 10m ROLL

Masterlife WP 754 is a post-applied sheet membrane waterproofing system consisting of a highly flexible polyolefin membrane with self adhesive backing. Unit Size: 1m x 20m

Masterlife WP 754 is a pre-applied sheet membrane waterproofing system consisting of highly flexible polyolefin membrane and a designed non-woven fleece. Unit Size: 1.6MM X 1.0M X 20M

Masterseal 590 when mixed with clean water, provides a ready to use rapid setting durable plugging mortar for active water leaks in concrete and masonry. Unit Size: 5kg

Masterseal 590 when mixed with clean water, provides a ready to use rapid setting durable plugging mortar for active water leaks in concrete and masonry.

Unit Size: 25kg