Waterproofing

.

.

.

.

.

.

GCP Hydroduct CF is a high density polyethylene combined cavity former and vapour barriers for drained BS 8102:2009 Type C basement construction. Hydroduct CF 20 is used for forming drained cavities horizontally and vertically. Unit Size: 2m x 20m roll This product is not purchasable on the website. Please call or email to place your order.

GCP Hydroduct CF is a high density polyethylene combined cavity former and vapour barriers for drained BS 8102:2009 Type C basement construction. Hydroduct CF 20 is used for forming drained cavities horizontally and vertically. Hydroduct CF 08 is used for forming drained cavities horizontally and vertically in lower risk applications. Unit Size: Hydroduct CF 20: 2m x 20m roll Hydroduct CF 08: 2.4m x 20m roll

.

GCP Hydroduct 200 is a polypropylene non-woven filter fabric on one face of a 12mm studded drainage core with a pressure dissipation plastic film bonded to the other face. Applied to walls of basements that have been waterproofed with Bituthene membranes. Also applied to existing basement walls and permanent shuttering prior to the application of Preprufe membranes. Unit Size: 1.25m x 32m x 12mm

GCP Hydroduct 200 is a polypropylene non-woven filter fabric on one face of a 12mm studded drainage core. Applied to walls of basements that have been waterproofed with Bituthene membranes and Servipak protection boards. Unit Size: 1.25m x 32m x 12mm

GCP GGM400 Tape is a butyl tape for sealing laps

GCP GGM400 Gas Membrane is a loose laid sheet membrane system designed to protect buildings against the ingress of methane, radon, carbon dioxide, hydrocarbon vapours and water vapour. Unit Size: 2m x 50m roll This product is not purchasable on the website. Please call or email to place your order.

GCP Aquatec Super XA is a rigid, cement based coating and dry broadcast system for crystalline waterproofing of concrete trough saturation of the capillaries. Unit Size: 20kg

GCP Bituthene Mastic is a trowel applied bituminous mastic for use with GCP waterproofing membranes Unit Size: 4.5 litre can

GCP Bituthene LM is a two component elastomeric liquid applied detailing compound for use with GCP Applied Technologies waterproof membranes. Unit Size: 5.7 litre pack (Parts A & B)

GCP Bituthene GP is a self-adhesive rubber bitumen/HDPE waterproof membrane for low risk applications. Unit Size: 1m x 25m roll

GCP Bituthene 8000 is an advanced, self-adhesive membrane with unique HDPE composite film that provides superior physical properties for water and vapour proof application in sub-structures. Unit Size: 1m x 20m roll

GCP Bituthene 4000 is a self-adhesive, cross-laminated HDPE waterproofing membrane with enhanced bonding characteristics. Unit Size: 1m x 20m roll

GCP Bitustik Standard is double sided, self adhesive, cold applied, waterproofing tape for membrane detailing and sealing. Unit Size: 150mm x 12m roll

GCP Bitustik BT is a double sided, self adhesive, cold applied, waterproofing tape for membrane detailing and sealing. Unit Size: 150mm x 10m or 240mm x 10m

GCP Bitustik BT is a double sided, self adhesive, cold applied, waterproofing tape for membrane detailing and sealing. Unit Size: 150mm x 10m or 240mm x 10m

GCP Betec Seal is a one component, cementitious coating for waterproofing/dampproofing of new and existing structures. Unit Size: 25kg

GCP Betec Plug is a quick setting, cementitious, waterproof plugging compound for stopping flowing/seeping water entry into sub-structures. Unit Size: 10kg

GCP Betec NSM is a polymer-modified, fibre-reinforced, cementitious mortar for repairing and restoring concrete and masonry surfaces. The incorporation of plastic fibres minimises the risk of shrinkage cracking and the polymers ensure density and durability in the hardened mortar. Unit Size: 25kg

GCP Betec NSM is a polymer-modified, fibre-reinforced, cementitious mortar for repairing and restoring concrete and masonry surfaces. The incorporation of plastic fibres minimises the risk of shrinkage cracking and the polymers ensure density and durability in the hardened mortar. Unit Size: 25kg

GCP Betec Mesh is a reinforcing mesh for use where substreate cracking has or is likely to occur.

GCP Betec Flex is a two component flexible crack bridging cement based coating designed for the waterproofing of new and existing structures such as basements, elevator pits, concrete tanks, reservoirs and planter boxes. Unit Size: A Component: 9kg plastic pails B Component: 23kg bags

GCP Betec Flex is a two component flexible crack bridging cement based coating designed for the waterproofing of new and existing structures such as basements, elevator pits, concrete tanks, reservoirs and planter boxes. Unit Size: A Component: 9kg plastic pails B Component: 23kg bags

GCP Betec Band is an elastomeric tape for use at all designed movement joints, construction joints and horizontal to vertical joints

GCP Betec 350 is a single component cementitious compound which is polymer modified and fibre reinforced. It is a rapid setting, high strength, waterproof compound used to seal tieholes that are created by formwork tie bars. Unit Size: 8kg

.

GCP Bentorub MS Fixer is a 1 component, caulk applied elastic MS-polymer adhesive. MS Fixer cures into an elastic compound with very good adhesion to most construction materials. MS Fixer is specially developed as adhesive for the Colflex range of EPDM membranes. Unit Size: 400cm³ sausages

GCP Bituthene Primer B1 is a quick drying all temperature primer to enable same hour application of Bituthene membranes. Unit Size: 5 ltr can

GCP Bituthene Primer B1 is a quick drying all temperature primer to enable same hour application of Bituthene membranes. Unit Size: 25 ltr can

GCP Armour tape is a great alternative to duct tape and works great as a site tape. Unit Size: Roll

GCP Aerofil 2 is a high density, compressible closed cell, polyethylene filler for movement joints in civil/structural works and water retaining structures Unit Size: 50mm x 0.8m x 2m (1.6m²)

GCP Aerofil 2 is a high density, compressible closed cell, polyethylene filler for movement joints in civil/structural works and water retaining structures Unit Size: 25mm x 0.8m x 2m (1.6m²)

GCP Aerofil 2 is a high density, compressible closed cell, polyethylene filler for movement joints in civil/structural works and water retaining structures Unit Size: 20mm x 0.8m x 2m (1.6m²)

GCP Aerofil 2 is a high density, compressible closed cell, polyethylene filler for movement joints in civil/structural works and water retaining structures Unit Size: 10mm x 0.8m x 2m (1.6m²)

GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades. Unit Size: 25mm x 0.8m x 2m (1.6m²)

GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades. Unit Size: 20mm x 0.8m x 2m (1.6m²)

GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades. Unit Size: 10mm x 0.8m x 2m (1.6m²)

GCP Adcore Mastic is a hydrophilic mastic for use as a bedding bead on irregular concrete surfaces prior to the application of Adcor 500S or Adcor 500T. Unit Size: 310ml cartridge

GCP Adcor Adhesive is for gluing Adcor 500S & Adcor 500T to smooth concrete, steel and plastic substrates. Supplied in cartridges for gun applications. Unit Size: 310ml cartridge

GCP Adcor 500T is a thick sectioned, conformable, hydro-expansive waterstop for preventing saline and brackish water entry throughjoints in concrete substructures. Unit Size: 25mm x 20mm waterstop strip, supplied in 5m rolls

GCP Adcor 500S is a thick sectioned, conformable, hydro-expansive waterstop for preventing water entry through joints in concrete substructures. Unit Size: 25mm x 20mm waterstop strip, supplied in 5m rolls

GCP Servipak protection boards are robust, bitumen impregnated boards, designed for permanent protection of Servidek. The boards are laid into "wet" Servidek liquid membrane to provide protection against damage from hot and cold applied finishes. Unit Size: 6mm x 1m 1.5m (1.5sqm)

GCP Adcor 550MI kit is a double protection system for construction joints using 2-in-1 pre-applied, post injectable hydrophilic waterstop. Unit Size: Each box contains: Adcor 500MI 8 x 5m rolls (40m) Reinforced PVC tube 4m + 16 caps Blue Trumpets 16 pieces Adcor 550MI clips 175 pieces PVC tube clips 16 pieces

Cetco Coredisc is a nominal 100mm (4") round x 1.5mm (60 mil) thcik non-reinforced thermoplastic disc. Coredisc is also resistant to most forms of fungus, algae and micro-biolocial attack. Unit Size: 100 Corediscs per box.

Cetco Cetbit 300 is a self-adhering waterproofing membrane consisting of 1.4mm of rubberised bitumen integrally bonded to a 0.1mm cross-laminated HDPE protective film. These two components combine to offer an extremely effective waterproofing barrier with a factory controlled thickness to ensure uniform application. Unit Size: Roll Width 1m, Roll Length 20m, Roll Area 20 sqm, Roll Weight 32kg

Cetco Cetseal is a multi-purpose, single component polyether moisture cure sealant/adhesive. Cetseal is a low VOC, 100% solids, non-shrinking product with excellent UV resistance. Unit Size: 290ml cartridge

Cetco Bentoseal is trowel-grade, sodium bentonite/butyl-rubber based mastic designed for a variety of surface preparation and waterproof detailing work with select Cetco waterproofing membranes. Unit Size: 15kg Pail

CD Flexible Jetting Eye for maintenance access L: 200mm H: 106mm D: 85mm Jetting Eye: 150-250mm

CD Channel outlet to 38mm pipe L: 200mm H: 106mm D: 85mm + outlet

CD Channel to encourage collected water to sump chambers or gravity fed outlets. L: 2m H: 106mm D: 85mm

Cetco Ultraseal XP is an active waterproofing membrane for exceptional performance in a wide-range of contaminated environments. Unit Size: 1.15m x 8.7m (10m²) roll

Flexcrete Cemprotec E942 incorporates the benefits of copolymer and epoxy resin technologies into a water based cementitious system to give a hard, durable coating with excellent resistance to water, chloride ions, oxygen and aggressive chemicals.

Unit Size: 30kg

Flexcrete Cemprotec Elastic is an elastomeric, cementitious modified, polymer-rich coating which maintains its flexibility under permanent immersion and when exposed externally.

Unit Size: 30kg

Cetco Voltex Granules are an active granular material used at detail areas that acquire additional protection. Unit Size: 20kg

.

Cetco Voltex DS is a proven waterproofing membrane ideal for vertical and horizontal foundation surfaces. Unit Size: 1.1 x 5m roll

Cetco Voltex is a proven waterproofing membrane ideal for vertical and horizontal foundation surfaces. Unit Size: 1.1 x 5m roll

Cetco Voltex is a proven waterproofing membrane ideal for vertical and horizontal foundation surfaces. Unit Size: 1.1 x 5m roll

Cetco Volsheet FB is a synthetic rubber based strip sealant with a fixed foil backing. It offers good adhesion to a wide range of building substrates has excellent tear and puncture resistance and remains flexible for the duration of its service life. Unit Size: 200mm x 10m roll

High Performance Polymeric DPC Cetco Volsheet DPC is a high performance polymeric Damp Proof Course (DPC). The product does not contain pitch or bitumen. Unit Size: Volsheet DPC is supplied in two roll sizes: 650mm x 20m 1m x 20m

Cetco Volsheet DPC is a high performance polymeric Damp Proof Course (DPC). The product does not contain pitch or bitumen. Unit Size: 1000mm x 20m roll

Cetco Volsheet DPM is a traditional Damp Proof Membrane and a gas impermeable membrane consisting of high quality environmentally friendly recycled polythene

Cetco Volseal 250 is a highly elastic waterproof coating consisting of aggregates, cement-based binders and acrylic polymers. Unit Size: 25kg bag (Part A Powder) and 10kg Pails (Part B Liquid)

.

Cetco Coreflash UV is a nominal 1.5mm thick reinforced thermoplastic flashing membrane with excellent UV, tear, puncture and flame resistance. Coreflash UV is also resistant to most forms of fungua, algae and microbiological attack. Unit Size: 1.55m x 12.9m rolls

Cetco Coreflash NR is a nominal 1.5mm thick non-reinforced solid white thermoplastic flashing membrane with excellent UV, tear, puncture and flame resistance. Coreflash NR is also resistant to most forms of fungus, algae and micro-biological attack. Unit Size: 1.55m x 12.9m rolls

Cetco Coreflex XP is a 1.5mm nominal thermoplastic membrane reinforced with a 90 gram/sqm polyester reinforcing scrim integrally bonded to an XP Technology Core. Unit Size:1.7m x 12.9m rolls; 1.55m wide thermoplastic membrane with XP Technology Core offset by 150mm along the long roll edge.

Cetco Volseal 200 is a single component, surface applied material, which waterproofs and protects concrete in-depth. Unit Size: 25kg plastic tubs.

Cetco Swelltite is a highly effective waterproofing membrane consisting of a sodium bentonite compound integrally bonded to a geomembrane liner. Unit Size: 1.02m x 10m; 10.2 sqm per roll

Cetco SS80 Seamtape is a synthetic rubber-based general purpose preformed strip sealant with laminated polyester film. Colour: White Unit Size: 80mm x 35m rolls.

Cetco Seal XXP is trowel-grade mastic designed for a variety of surface preparation and detailing work with Ultraseal XP and other Cetco active waterproofing membranes. Unit Size: 15kg pail

Cetco Sealmat is a self-bonding damp-proofing membrane, approximately 6.5mm thick, consisting of two polypropylene geotextiles, one woven and one non-woven, enclosing granular sodium bentonite at a minimum eight of 4.0kgm¯². Unit Size: 1.1m wide x 5m long

Cetco Waterstop RX103 is a hydrophilic strip waterstop designed to stop water infiltration through cast-in-place concrete construction joints by expanding upon contact with water to form a positive seal against the concrete. Waterstop RX103 is produced in a rectangular shape measuring 15x10mm.

Cetco Waterstop RX101 is a hydrophilic strip waterstop designed to stop water infiltration through cast-in-place concrete construction joints by expanding upon contact with water to form a positive seal against the concrete. Waterstop RX101 is produced in a rectangular shape measuring 25x20mm

Cetco Maxbit SKW is a cold applied bitumen rubber compound designed for excellent adhesion of Swelltite membranes to structural substrates and as a damp-proof coating. Unit Size: 20kg pails

Cetco Aquadrain ICD 8mm is a medium capacity drainage membrane (4 litres/m²) for floors and walls both above and below ground level. Unit Size: 2.07m x 20m* *including flat overlapping edge (flange) without studs, working area ca. 40m²

Cetco Aquadrain ICD 20mm is the highest drainage capacity membrane in the Aquadrain ICD range giving a void volume of 14 litres/m². Unit Size: 2.0m x 20m* *including flat overlapping edge (flange) without studs, working area ca. 40m²

Cetco Hydrofix 600 is a single part, rapid curing, modified polyurethane waterproofing membrane that can be applied directly to dry concrete surfaces. Unit Size: 15ltr drum

Cetco DS30 Butyl Tape is a double-sided high-tack butyl tape, used for sealing inside GB-600 membrane overlaps as applicable. Unit Size: 30mm wide x 30lnm roll

Cetco CS-300 is a highly penetrative solution specially formulated to react with hydrated cement both at the surface and to a depth of up to 15mm. Unit Size: 25ltr

Cetco Coreflex Universal Corners are preformed injection molded thermoplastic flashings that will accommodate inside and outside corner details of any dimension. Coreflex Universal Corners come in one size, in one piece and can be trimmed to fit the appropriate condition.

Cetco Waterstop XP is an Expanding Waterstop for Concrete Construction Joints Unit Size: 10mm x 15mm x 6m roll

Ardex DPM 1 C can be applied to protect the floor covering installation from residual construction moisture and ground bearing moisture. Unit Size: 25kg

Ardex DPM 1 C can be applied to protect the floor covering installation from residual construction moisture and ground bearing moisture. Unit Size: 10kg

For the reinforcement of angles, corners and joints underneath ARDEX WPM 200 Solvent Free Multi Purpose Epoxide Liquid Waterproof Membrane. Unit : Each

Ardex WPM 200 provides a surface applied water and vapour barrier or priming layer to concrete, screeded, rendered or masonry surfaces, steel and other vertical as well as horizontal hard surfaces. Unit Size: 5ltr