Waterproofing

A flexible 0.6mm composite damp proof course and cavity tray system. It is supplied in 20m rolls and available in a wide-variety of widths. Unit Size: 450mm x 20m roll

A double sided butyl based compound with an oversize quick release flm. Unit Size: 100mm x 15m

A swellable hydrophilic polymer waterstop. Manufactured from thermoplastic synthetic rubber, the product is lightweight and highly flexible. The strap is coloured orange for ease of recognition. Visqueen IGW Pipe Strap is supplied in packs of 5 straps.

A crystalline waterproofing admixture powder consisting of a blend of specially selected chemicals. When combined with ready mix concrete at batching plant, it produces a crystalline reaction which enhances water resistance and durability of the cured concrete. Unit Size: A tub consisting of six 4.1 kg soluble bags and used in the ratio of 1:1 i.e. one 4.1kg bag for each 1m³ of concrete.

Swellable hydrophilic polymer waterstops. Manufactured from thermoplastic synthetic rubber, the products are lightweight and highly flexible. Unit Size: 10m long strips, 20mm wide and 10mm high.

Swellable hydrophilic polymer waterstops. Manufactured from thermoplastic synthetic rubber, the products are lightweight and highly flexible. Unit Sizes: IGW5 Waterstop = 10m long strips, 20mm wide and 5mm high.

A black elastomeric bituminous priming solution. Unit Size: 5ltr tin

A robust co-polymer thermoplastic membrane, 0.5mm thick, yellow in colour. Unit Size: 4m x 12.5m center folded roll

A heavy duty, traditional DPC and cavity tray system manufactured with a polyester reinforced carrier, rubber modifed bituminous coating and surfaced on both sides with a fne silica sand. Unit Size: Supplied in 8m length rolls 600mm wide

A heavy duty, traditional DPC and cavity tray system manufactured with a polyester reinforced carrier, rubber modifed bituminous coating and surfaced on both sides with a fne silica sand. Unit Size: Supplied in 8m length rolls 450mm wide

A heavy duty, traditional DPC and cavity tray system manufactured with a polyester reinforced carrier, rubber modifed bituminous coating and surfaced on both sides with a fne silica sand. Unit Size: Supplied in 8m length rolls 1000mm wide

Visqueen Ultimate Gas DPC utilises Visqueen's Advanced Barrier Technology. The DPC is a 0.5mm thick, flexible 7 layer co-extruded film providing volatile organic compound (VOC) and ground gas resistance. Unit Size: 850mm x 20m

Visqueen Ultimate Gas DPC utilises Visqueen's Advanced Barrier Technology. The DPC is a 0.5mm thick, flexible 7 layer co-extruded film providing volatile organic compound (VOC) and ground gas resistance. Unit Size: 600mm x 20m

Visqueen Gas Resistant Self Adhesive Membrane is a foil lined modifed bitumen rubber membrane with a self adhesive coating protected by a removable polyethylene release flm. Unit Size: 1m x 20m

A flexible black plastic strip, 2m long, 25mm high and 2mm thick. The strip is pre-drilled at 150mm centres with 8mm diameter holes (13 holes per strip). The strip are supplied individually.

Visqueen EcoMembrane DPM is manufactured from a minimum 90% recycled polyethylene. Unit Sizes: 0.3mm x 4m x 25m roll, 0.5mm x 4m x 12.5m

A single sided butyl rubber self adhesive tape. Unit Size: 150mm x 10m

A PVC moulded unit used to provide cleaning, inspection, and maintenance access to the water channel system.

A small PVC moulded connector piece to link two lengths of CD Channel.

A PVC moulded drainage conduit, which should be fitted around the periphery of an internal floor at the vulnerable wall/floor junction. . Any water entering the building through walls or curved softs is controlled behind the membrane and enters the channel through the pre-drilled 19mm holes before being diverted to the mechanical (sump and pump) or natural drainage point. Unit Size: 2m lengths, 80mm wide, 50mm deep

A two component system both supplied in the same tin. The first component (Part A) is a bitumen-extended polyurethane fluid (15kg). The second component (Part B) is an accelerator hardener (0.6kg). Unit Size: 15.6kg

A clear, single component polyurethane based primer. Unit Size: 4kg tin

A grey, single component liquid damp proof and waterproof membrane. Unit Size: 20kg tins

A blend of high-grade silicates and wetting agents, held in suspension with water as a carrier. Unit Size: 25kg drums

BASF Masterseal 933 Adhesive is a joint waterproofing bandage and epoxy resin adhesive. Unit Size: 5kg

BASF Masterseal 930 is a joint waterproofing bandage and epoxy resin adhesive. Unit Size: 200 x 1mm x 20m

Adocoat LAC is a bitumen based compound for application as a damp proof membrane in solid floor construction, sandwiching damp proof membranes under concrete and roof screeds, external waterproofing to buried concrete or as a tanking membrane. Unit Size: 25ltr

Adocoat is an alkali resistant cold applied rubberised bitumen emulsion which imparts excellent adhesion to sound building materials, including asphalt. Unit Size: 205ltr

Bitument Rubber Latex Waterproof Coating Adocoat is an alkali resistant cold applied rubberised bitumen emulsion which imparts excellent adhesion to sound building materials, including asphalt. Unit Size: 25ltr

A high performance epoxy waterproof resin for detailing of waterproofing and ground gas protection systems. It is a three component system consisting of base resin, liquid hardener and specially graded inert fillers. It is suitable for thicknesses from 20-100mm. Unit Size: 15 ltr packs containing liquid, base and hardener.

A 50mm wide double-sided butyl tape for sealing lap joint and for use in detailing work. Unit Size: 50mm x 30m x 1.5mm

A BBA approved high performance, totally gas-impervious, reinforced membrane. It is a black/white, multi-layer, low density polyethylene, ground gas resistant based membrane with an integral aluminium foil layer and a polypropylene reinforcing grid. Unit Size: 2m x 50m roll This product is not purchasable on the website. Please call or email to place your order.

A pre-formed pipe collar with a flat based to simplify pipe penetration details. Available in standard diameters 110mm and 160mm.

A pre-formed pipe collar with a flat based to simplify pipe penetration details. Available in standard diameters 110mm and 160mm.

A geocomposite drainage sheet with a 8mm thick HDPE cuspated core and non-woven polypropylene geotextiles, recommended for most building and civil engineering drainage applications. Unit Size: 2.4m x 20m roll

A bitumen impregnated board, designed to protect membranes from damage through backfilling and trafficking.

A reinforcing mesh for use in conjunction with Proofex LM for angles and pipe penetrations etc. Unit Size: 100mm x 50m

A two component bituminous liquid membrane for waterproofing of underground structures and intricate details in conjunction with Proofex waterproofing systems. Unit Size: 28kg pack

A 10m long x 250mm wide section of polyethylene with 2butyl selvedge strips. It is used by bending at 90° along its length for application between horizontal and vertical membrane to provide waterproofing continuity and it also connects with internal and external corner pieces. Proofex L section is supplied with a butyl "closure" strip at each end. Unit Size: 125mm x 125mm x 10m

A 125mm corner piece made from polyethylene membrane with a 100mm butyl selvedge for use in conjuction with Proofex L Section.

A 125mm corner piece made from polyethylene membrane with a 100mm butyl selvedge for use in conjuction with Proofex L Section.

A reinforced, double sided waterproof adhesive tape for sealing and jointing roll ends, cut edges and corner pieces. Unit Size: 200mm x 10m x 1.5mm

A robust, pre-applied, fully bonded, gas-resistant, waterproofing membrane for use in below ground, reinforced concrete structures. Unit Size: 1.27m x 30m

A two-component, fast-setting, flexible and tough epoxy system. Unit Size: 6 x 560ml sachet units (includes 3 static mixers)

Fosroc Cavitydrain membranes are manufactured from chemically resistant high density polyethylene in a range of stud depths designed to permit high water flow through a permanent void formed against a substrate. Fosroc Proofex Cavitydrain 80 is a space saving solution for vertical applications in conjunction with internal blockwork walls and dry lining systems. Unit Size: 2.07m x 20m

Fosroc Proofex Angle Fillets are strips fixed at all floor and wall junctions with a 6mm bead of Nitoseal MB175.

A high performance methane, radon and carbon dioxide resisting, self-adhesive waterproof membrane for basements and below ground structures. It incorporates an aluminium layer and a polymer modified bitumen compound on a high strength polymer backing film. Unit Size: 1m x 20m

A cold applied, flexible, high performance waterproofing and radon barrier membrane, incorporating a cross laminated HDPE carrier film with a polymer modified bitumen compound. Unit Size: 1m x 20m

A grey, elastomeric water-swellable paste which is applied like a sealant. The hydrophilic properties of supercast SWX display good consistency in swell rate during repeated wet/dry cycling. Expansion of the product on contact with water creates a positive pressure against the faces of the concrete joint, thus preventing the passage of water. Unit Size: 600ml

A 10mm x 20mm swellable waterstop that can be installed and positively linked into conventional Supercast PVC waterstop networks. Supercast SW20 is made from high performance synthetic elastomeric strips. Unit Size: 10mm x 20mm x 5m roll

A 5mm x 20mm swellable waterstop that can be installed and positively linked into conventional Supercast PVC waterstop networks. Supercast SW10 is made from high performance synthetic elastomeric strips. Unit Size: 5mm x 20mm x 15m roll

A gun grade adhesive for bonding of supercast SW Unit Size: 380ml cartridge

Fosroc Supercast Rearguard sections incorporate a flat top center box, allowing movement to be accommodated in expansion joints. They also provide a seat to support joint fillers. Unit Size: 250mm x 12m Roll

Fosroc Supercast Rearguard sections incorporate a flat top center box, allowing movement to be accommodated in expansion joints. They also provide a seat to support joint fillers. Unit Size: 200mm x 12m Roll

Fosroc Supercast Rearguard sections incorporate a flat top center box, allowing movement to be accommodated in expansion joints. They also provide a seat to support joint fillers. Unit Size: 150mm x 12m Roll

Fosroc Supercast Rearguard sections incorporate a flat top center box, allowing movement to be accommodated in expansion joints. They also provide a seat to support joint fillers. Unit Size: 150mm x 12m Roll

Fosroc Supercast Predimax Injection Hose comprises of a double-walled, patented PVC hose specially formulated to be durable, robust and fully resistant to continuous immersion in ground water, saline, sewage, alkalis, acids, petrol, diesel and alcohol. Unit Size: 100m roll plus kit items detailed in TDS

An externally placed waterstop for use where the joint line coincides with a change in level of the slab soffit. Unit Size: 3m lengths

IKO-Pro SA Bitumen Primer is a fast drying rubber modified bituminous priming solution used to prepare substrates for application self-adhesive bitumen waterproofing membranes.

Unit Size: 5L

IKO-Pro SA Bitumen Primer is a fast drying rubber modified bituminous priming solution used to prepare substrates for application self-adhesive bitumen waterproofing membranes.

Unit Size: 25L

IKO Synthaprufe is a blend of bitumen emulsion and synethic rubber latex used in damp proof structures, at or above ground level.

Unit Size: 25L

Hyload Tanking 2000SA a self adhesive modified bitumen sheet material used within a structural waterproofing system.

Unit Size: 1m x 15m rolls

Hyload Gastite is a cold applied self-adhesive membrane protecting structures against the ingress of moisture and methane radon gasses.

Unit Size: 1m x 20m rolls

Juta GP Titantech DPC is a unique single layer, embossed high performance, gas and hydrocarbon resistant DPC. Unit Size: 900mm x 20m

Juta GP Titantech DPC is a unique single layer, embossed high performance, gas and hydrocarbon resistant DPC. Unit Size: 1.3m x 20m

Juta GP Titantank is a self adhesive version of the GP Titanflex; composed of self-adhesive with an upper surface finish of GP Titanflex, and a lower surface finish of siliconised polypropylene release film. Unit Size: 1.2mm x 0.9m x 20m

Juta GP Titanflex gas and hydrocarbon barrier is a multi-layer, polyethylene membrane. It is specifically designed, manufactured, tested and certified to perform as a methane, carbon dioxide, radon ground gas, VOC, air moisture and hydrocarbon protection system. Unit Size: 0.5mm x 2m x 50m

Juta Pile Head Sealer is a crystalline cementitious waterproof slurry which creates a monolithic bond to the structure and seals the pile head. Unit Size: 20kg

Juta PD1700 includes a high compressive strength Cuspate High Density Polyethylene (HDPE) Drainage core with a geotextile filter bonded to one side. It is designed as a high flow medium to alleviate hydrostatic pressure on below ground structures, as well as providing protection to the underlying membrane (gas/waterproofing). Unit Size: 8mm x 2m x 20m

Juta Hydrolock Strip is a swellable bentonite joint sealing tape with crystallisation additives. Hydrolock Strip is used as a waterstop in concrete construction joints, and is tested and approved up to 7 bar water pressure. Unit Size: 5m x 20mm x 25mm

Juta Hydrolock Paste is a plastic bentonite paste which is specifically designed for structural waterproofing. It is easy to use, has excellent water absorption capacity and is biologically harmless, weather resistant, solvent free and frost resistant. Unit Size: 25kg

Juta Hydrolock is a mechanically bonded Geosynthetic Clay Liner (GCL) composite of pulverised bentonite embedded between two layers of geotextile. The internal 5kg of natural sodium bentonite swells in contact with water to form a low permeability waterproofing barrier. Unit Size: 1.15m x 5.1m

JUTA GP Titanbond Edge Strip is a specially designed narrow width roll of the GP Titanbond for use on kicker details, or transitions areas from horizontal to vertical. Unit Size: 1m x 25m

Juta GP Primer is a quick drying, cold applied bituminous solution designed to penetrate and seal porous surfaces prior to the application of covering materials. Unit Size: 5 ltr and 25 ltr

Juta GP Primer is a quick drying, cold applied bituminous solution designed to penetrate and seal porous surfaces prior to the application of covering materials. Unit Size: 5 ltr and 25 ltr

GCP Bituthene Primer W2 is a water-based surface conditioner specially formulated to prepare concrete, masonry and wood surfaces for the systems. Primer W2 is a low VOC water-based alternative primer for all GCP post-applied membranes. Unit Size: 5 litre can

GCP Slipstrip 2 is low capacity bearing slips made from dense extruded polyethylene sheet for fixed end rotation joints or as a low friction, structural slip membrane. Unit Size: 300mm wide, 1.5mmn thick x 25m rolls

GCP Serviseal Exp Coil is a passive external PVC waterstop system manufactured in a range of sizes Unit Size: Each

GCP Serviseal AT 240 is an important advance in concrete joint protection which combines Active Technology with the conventional mechancial properties of PVC waterstops, developed for water exclusing and retaining structures such as basements, reservoirs, sewage treatment works etc. Unit Size: 7.5 m long coil

GCP Preprufe SC1 Primer is a non-bituminous, quick drying, damp and green concrete tolerant, solvent based primer for use with Preprufe 800PA cold applied, self-adhesive waterproof membrane. Unit Size: 20 litre can

GCP Bituthene Primer S2 is a rubber-based primer in solvent, specially formulated to provide good initial adhesion, for use with the Bituthene range of cold applied, self adhesive waterproof membranes. Unit Size: 5 ltr can

GCP Bituthene Primer S2 is a rubber-based primer in solvent, specially formulated to provide good initial adhesion, for use with the Bituthene range of cold applied, self adhesive waterproof membranes. Unit Size: 25 ltr can

GCP Preprufe Tape is a reinforced pressure sensitive tape incorporating Preprufe coating for continuous concrete adhesion at taped edges and details. Preprufe Tape LT is for temperatures between -5°c and 30°C. Unit Size: 100mm x 15m roll

GCP Preprufe 800PA LT is an advanced, self-adhesive Preprufe Membrane for protection of below ground structures. Preprufe 800PA Low Temperature (LT) Membrane for low temperature applications when surface and ambient temperatures are between -5°C and 20°C. Unit Size: 1.2m x 35m roll

GCP Preprufe 300R is unique composite sheets comprised of a thick HDPE film, pressure sensitive adhesive, and weather resistant protecting coating. Unit Size: Roll

GCP Preprufe 300 LT Plus is the latest generation of Preprufe membranes with the unique Preprufe ZipLap seam. Unit Size: Roll

GCP Preprufe 160 Flex is a pre-applied flexible waterproof membrane that develops an adhesive bond to poured concrete for irregular permanent formwork. Unit Size: 1.2m x 35m roll

GCP Preprufe 160R is unique composite sheets comprised of a thick HDPE film, pressure sensitive adhesive, and weather resistant protecting coating. Unit Size: Roll

GCP Preprufe 160 LT Plus is the latest generation of Preprufe membranes with the unique Preprufe ZipLap seam. Unit Size: Roll

.