Waterproofing

A thixotropic, polymer modified, cement based, waterproof, rapid hardening, high build repair mortar. Unit Size: 20kg

.

Used at changes in direction of the Aqua Channel.

Used to join two pieces of Aqua Channel together.

RIW Aqua Channel is pre-formed in a pentagonal shape, with pre-drilled 19mm holes at 70mm centres along its length. Aqua Channel is an internal peripheral PVC drainage conduit that has been specifically designed for the control of water ingress in below ground situations. Unit Size: 2m lengths

A double-sided bitumen/rubber self-adhesive tape with a removable silicone release paper one side and a thin polyethylene removable sheet on the other. Unit Size: 150mm wide rolls x 15m long

.

A self-adhesive vinyl tape. Unit Size: 48mm wide rolls x 50m long

A solvent free polymer modified epoxide coating, supplied as a two part pack of base and hardener in pre-measured proportions. Unit Sizes: 5ltr & 20ltr packs (two part product) Grey or Black

A solvent free polymer modified epoxide coating, supplied as a two part pack of base and hardener in pre-measured proportions. Unit Sizes: 5ltr & 20ltr packs (two part product) Grey or Black

A solvent free polymer modified epoxide coating, supplied as a two part pack of base and hardener in pre-measured proportions. Unit Sizes: 5ltr

A solvent free polymer modified epoxide coating, supplied as a two part pack of base and hardener in pre-measured proportions. Unit Sizes: 5ltr & 20ltr packs (two part product) Grey or Black

Unit Size: Roll

A trowel-grade, sodium bentonite/butyl-rubber based sealant, designed for use with the Structureseal system. Unit Size: 15 ltr tub

.

Pre-fabricated 'top-hat' sections for use around incoming pipes. Unit Size: 110mm diameter, 130mm diameter, 160mm diameter

Pre-fabricated 'top-hat' sections for use around incoming pipes. Unit Size: 110mm diameter, 130mm diameter, 160mm diameter

Pre-fabricated 'top-hat' sections for use around incoming pipes. Unit Size: 110mm diameter, 130mm diameter, 160mm diameter

A two coat, cold applied damp proof membrane, which dries to a uniform gloss black finish. The coating is a solution of natural and petroleum bitumens in white spirit. Unit Sizes: 25 ltr

A two coat, cold applied damp proof membrane, which dries to a uniform gloss black finish. The coating is a solution of natural and petroleum bitumens in white spirit. Unit Sizes: 5 ltr and 25 ltr

A cementitious crystalline slurry that is applied to horizontal and vertical construction joints to provide additional waterproofing protection, and protect rebar from corrosion. Unit Size: 25kg

A crystalline grout used to create an internal or external waterstop at construction joints, pipe penetrations, tie-holes and control joints. Unit Size: 25kg

A synthetic rubber waterstop that uses swelling pressure to seal concrete construction joints and stops water. Unit Size: 10m roll

KIM contains Krystol technology, when added to concrete, Krystol chemically reacts with water and dehydrated cement particles to form insoluble needle-shaped crystals that fill capillary pores and micro-cracks in the concrete and block the pathways for water and waterborne contaminants. Unit Size: 8kg Bags

.

.

RIW Krytonite Adhesive is specially designed to adhere Krytonite Swelling Waterstop to concrete construction joints and penetrations that require waterproofing. Krytonite Adhesive has incredible bonding strength, even on damp concrete surfaces and can be used in all seasons. Unit Size: 290ml

A cold applied, bitumen based coating, which dries to form a uniform UV resistant and waterproof layer. The coating is a fibre and mineral filled solution of natural and petroleum bitumens in white spirit. Unit Size: 20 ltr

RIW Granules are chemically treated sodium bentonite granules, which are used as a detailing accessory product, with the Structureseal system. Unit Size: 20kg bag

A cold applied, high density polyethylene film bonded to aluminium foil and coated with bitumen/rubber self adhesive layer with a removable reinforced silicone release paper. Unit Size: 300mm x 20m

A cold applied, high density polyethylene film bonded to aluminium foil and coated with bitumen/rubber self adhesive layer with a removable reinforced silicone release paper. Unit Size: 1m x 20m long

.

Brick plugs fitted with watertight seal. Unit Size: Pack of 100

.

A cold applied combination of impermeable high density polyethylene sheet and permeable geotextile filter fabric. Unit Size: 2m x 20m long rolls This product is not purchasable on the website. Please call or email to place your order.

RIW Cavity Drain R7 is manufactured from 0.5mm translucent virgin high density polyethylene with studs approximately 8mm high. Unit Size: 2m wide x 20m long

RIW R20 Cavity Drain is manufactured from 1mm thick black high density polyethylene with studs approximately 20mm high. Unit Size: 2m wide x 20m long

RIW Aqua Channel Outlet consists of a 90° bend, with a male coupling, which is fitted to the base of a 200mm length of Aqua Channel; allowing water to be taken from the channel to the water collection point.

A double-sided butyl tape. Unit Size: 100mm wide rolls x 15m long

A high performance polymeric material, available in widths from 100mm to 1000mm, supplied in rolls 20m long. Unit Size: Length 20m long rolls Widths (various available) 100,150, 225, 300, 375, 450, 600, & 1000mm

A high performance polymeric material, available in widths from 100mm to 1000mm, supplied in rolls 20m long. Unit Size: Length 20m long rolls Widths (various available) 100,150, 225, 300, 375, 450, 600, & 1000mm

A high performance polymeric material, available in widths from 100mm to 1000mm, supplied in rolls 20m long. Unit Size: Length 20m long rolls Widths (various available) 100,150, 225, 300, 375, 450, 600, & 1000mm

A high performance polymeric material, available in widths from 100mm to 1000mm, supplied in rolls 20m long. Unit Size: Length 20m long rolls Widths (various available) 100,150, 225, 300, 375, 450, 600, & 1000mm

A high performance polymeric material, available in widths from 100mm to 1000mm, supplied in rolls 20m long. Unit Size: Length 20m long rolls Widths (various available) 100,150, 225, 300, 375, 450, 600, & 1000mm

A high performance polymeric material, available in widths from 100mm to 1000mm, supplied in rolls 20m long. Unit Size: Length 20m long rolls Widths (various available) 100,150, 225, 300, 375, 450, 600, & 1000mm

A high performance polymeric material, available in widths from 100mm to 1000mm, supplied in rolls 20m long. Unit Size: Length 20m long rolls Widths (various available) 100,150, 225, 300, 375, 450, 600, & 1000mm

A high performance polymeric material, available in widths from 100mm to 1000mm, supplied in rolls 20m long. Unit Size: Length 20m long rolls Widths (various available) 100,150, 225, 300, 375, 450, 600, & 1000mm

A flat sheet, made of organic fibres saturated with bitumen. The board is resistant to water, ground salts and most corrosive chemicals. Unit Size: 3mm x 900mm x 2020

RIW Sheetseal Primer is a bitumen solution. Unit Size: 5 ltr, 25ltr

RIW Sheetseal Primer is a bitumen solution. Unit Size: 5 ltr, 25ltr

A cold applied, high density polyethylene film, coated with a bitumen/rubber self adhesive layer with a removable reinforced silicone paper. Unit Sizes: 150mm x 20m long 300mm x 20m long

A cold applied, high density polyethylene film, coated with a bitumen/rubber self adhesive layer with a removable reinforced silicone paper. Unit Sizes: 150mm x 20m long 300mm x 20m long

A cold applied, high density polyethylene film, coated with a bitumen/rubber self-adhesive layer with a removable reinforced silicone paper.

Unit Size: 1m x 20m roll

A black, flexible 0.6mm damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 600mm x 20m roll

A black, flexible 0.6mm damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 450mm x 20m roll

A black, flexible 0.6mm damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 150mm x 20m roll

A a black, flexible 0.6mm damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers.

Unit Sizes: 100mm x 20m

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 900mm x 20m roll

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 750mm x 20m roll

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 600mm x 20 roll

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 450mm x 20m roll

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 337.5mm x 20m roll

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 300mm x 20m roll

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 225mm x 20m roll

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 150mm x 20m rolls

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 112.5mm x 20m roll

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 1000mm x 20m roll

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Size: 100mm x 20m roll

A swellable high performance, one component, of-white polyurethane adhesive supplied in 310ml cartridges. Unit Size: 310ml

A high performance sodium bentonite and butyl rubber. Unit Size: The waterstop bar is 20mm x 25mm x 5m long

A single sided high strength aluminium tape coated with a high bond acrylic adhesive and a removable release flm protecting the adhesive coating. Unit Size: 75mm x 15m

A double-sided butyl rubber tape Unit Size: 25mm x 20m

A 0.5mm thick high density polyethylene (HDPE) profiled sheet with approximate 7 mm high studs. Unit Size: roll of 2.07m x 20m with a 70mm flange edge on one side to aid jointing

A double-sided butyl rubber tape. Unit Size: 10mm x 5m - 2 per box

A 1.0mm thick high density polyethylene (HDPE) profiled sheet with approximate 20 mm high studs . Unit Size: 2m x 20m roll

Visqueen Ultimate Gas DPC utilises Visqueen's Advanced Barrier Technology. The DPC is a 0.5mm thick, flexible 7 layer co-extruded film providing volatile organic compound (VOC) and ground gas resistance. The DPC has an embossed/debossed fnish, is coloured gold/white and can be installed with either surface facing upwards. Unit Size: 900mm X 20m roll

Visqueen Ultimate Gas DPC utilises Visqueen's Advanced Barrier Technology. The DPC is a 0.5mm thick, flexible 7 layer co-extruded film providing volatile organic compound (VOC) and ground gas resistance. The DPC has an embossed/debossed fnish, is coloured gold/white and can be installed with either surface facing upwards. Unit Size: 750mm X 20m roll

Visqueen Ultimate Gas DPC utilises Visqueen's Advanced Barrier Technology. The DPC is a 0.5mm thick, flexible 7 layer co-extruded film providing volatile organic compound (VOC) and ground gas resistance. The DPC has an embossed/debossed fnish, is coloured gold/white and can be installed with either surface facing upwards. Unit Size: 20m x 600mm rolls

Visqueen Ultimate Gas DPC utilises Visqueen's Advanced Barrier Technology. The DPC is a 0.5mm thick, flexible 7 layer co-extruded film providing volatile organic compound (VOC) and ground gas resistance. The DPC has an embossed/debossed fnish, is coloured gold/white and can be installed with either surface facing upwards. Unit Size: 20m x 500mm rolls

Visqueen Ultimate Double Sided Jointing Tape is a double sided butyl based compound with an oversize quick release fm. Unit Size: 100mm x 15m roll

Visqueen High Performance Urban Drainage Geomembrane is a robust thermoplastic geomembrane, black in colour, 1mm thick and supplied in single wound rolls (not folded). Unit Size: 1.4m x 50m

Visqueen Urban Drainage Geomembrane is a 100% recycled polyethylene geomembrane, black in colour, 0.5mm thick and supplied in multi folded rolls. Unit Size: 4m x 12.5m

Visqueen UDG Corner Units (unit dimension 150mm x 150mm x 150mm) should be positioned at the external corners of the crate system

A modifed bitumen rubber tanking membrane. It has a sanded fnish to the top surface and a heat dispersible flm on the underside. Unit Size: 1m x 8m roll

A modifed bitumen rubber membrane with a self adhesive coating protected by a removable polyethylene release flm. It is dark grey on the upper surface. Unit Size: 1m x 20m roll

A 1mm thick, robust co-extruded waterproofng membrane. It is coloured grey on the upper surface and black on the reverse. The grey surface is textured to aid adhesion to cast concrete. Unit Size: 2.44m x 41m

Visqueen Masonry Plugs are made from Polyoxymethylene (10mm diameter and 75mm in length) Unit Size: 100 per box

A grey cementitious compound containing portland cement, graded quartz sands, aggregates and chemical additives. Unit Size: 25kg tin

A fexible stainless steel strip, 1240mm long, 25mm high, with 8mm pre-drilled holes spaced at 150mm centres. There are 9 holes per strip and the strips are supplied in packs of 17 items. Unit Size: 21m pk

A white, flame retardant, flexible sealant supplied in 380ml cartridges. Unit Size: 380ml

Aa flexible 0.6mm composite damp proof course and cavity tray system. It is supplied in 20m rolls and available in a wide-variety of widths. Unit Size: 900mm x 20m roll

A flexible 0.6mm composite damp proof course and cavity tray system. It is supplied in 20m rolls and available in a wide-variety of widths. Unit Size: 800mm x 20m roll

A flexible 0.6mm composite damp proof course and cavity tray system. It is supplied in 20m rolls and available in a wide-variety of widths. Unit Size: 700mm x 20m roll

A flexible 0.6mm composite damp proof course and cavity tray system. It is supplied in 20m rolls and available in a wide-variety of widths. Unit Size: 600mm x 20m roll

A flexible 0.6mm composite damp proof course and cavity tray system. It is supplied in 20m rolls and available in a wide-variety of widths. Unit Size: 500mm x 20m roll