Waterproofing

A self-adhesive tape, with a carrier film and release liner, for internal jointing of Sikaproof A+ waterproofing system. Unit Size: 25m roll

A 2 part, polyurea/polyurethane-hybrid primer for cementitious substrates. The rapid curing performance allows overcoating of Sika Liquid Applied Membrane (LAM) roofing systems after 30 minutes. Unit Size: 11.5ltr (Part A=9ltr, Part B=2.5ltr)

Cetco Coredisc is a nominal 100mm (4") round x 1.5mm (60 mil) thcik non-reinforced thermoplastic disc. Coredisc is also resistant to most forms of fungus, algae and micro-biolocial attack. Unit Size: 100 Corediscs per box.

Cetco Swelltite is a highly effective waterproofing membrane consisting of a sodium bentonite compound integrally bonded to a geomembrane liner. Unit Size: 1.02m x 10m; 10.2 sqm per roll

Hyload Tanking 2000SA a self adhesive modified bitumen sheet material used within a structural waterproofing system.

Unit Size: 1m x 15m rolls

Visqueen Ultimate Gas DPC utilises Visqueen's Advanced Barrier Technology. The DPC is a 0.5mm thick, flexible 7 layer co-extruded film providing volatile organic compound (VOC) and ground gas resistance. The DPC has an embossed/debossed fnish, is coloured gold/white and can be installed with either surface facing upwards. Unit Size: 20m x 600mm rolls

A two-pack solvent free black liquid modified epoxide surface conditioner that can be applied to damp surfaces. Unit Size: 5ltr or 15 ltr (2-part)

Cetco Waterstop RX103 is a hydrophilic strip waterstop designed to stop water infiltration through cast-in-place concrete construction joints by expanding upon contact with water to form a positive seal against the concrete. Waterstop RX103 is produced in a rectangular shape measuring 15x10mm.

IKO-Pro SA Bitumen Primer is a fast drying rubber modified bituminous priming solution used to prepare substrates for application self-adhesive bitumen waterproofing membranes.

Unit Size: 25L

A synthetic rubber based, solvent-dispersed, primer for use as an integral component of the SikaProof®/ SikaBits® self-adhesive sheet membrane waterproofing systems. Unit Sizes: 12.5kg

GCP Preprufe SC1 Primer is a non-bituminous, quick drying, damp and green concrete tolerant, solvent based primer for use with Preprufe 800PA cold applied, self-adhesive waterproof membrane. Unit Size: 20 litre can

A bitumen solution to be used in conjunction with Sika BituSeal S-115. Unit Sizes: 25ltr, 5ltr

GCP Bituthene GP is a self-adhesive rubber bitumen/HDPE waterproof membrane for low risk applications. Unit Size: 1m x 25m roll

GCP Bituthene Primer B1 is a quick drying all temperature primer to enable same hour application of Bituthene membranes. Unit Size: 25 ltr can

Cetco Volsheet DPC is a high performance polymeric Damp Proof Course (DPC). The product does not contain pitch or bitumen. Unit Size: 1000mm x 20m roll

A 600ml gun to be used as part of the Proofex EFS range. Unit Size: Each

MasterLife WP 754 RT is a waterproofing repair tape with butyl rubber coating. Unit Size: 200mm X 20m

A rectangular acrylic sealing profile. It swells in contact with water to seal all types of construction joints and penetrations in concrete structures. Unit Size: 20mm x 10mm x 10m

A double-sided adhesive overlap tape based on a polyacrylic adhesive sandwiched between release liners. Unit Size: Each

GCP Bitustik BT is a double sided, self adhesive, cold applied, waterproofing tape for membrane detailing and sealing. Unit Size: 150mm x 10m or 240mm x 10m

Masterseal 590 when mixed with clean water, provides a ready to use rapid setting durable plugging mortar for active water leaks in concrete and masonry.

Unit Size: 25kg

A blend of high-grade silicates and wetting agents, held in suspension with water as a carrier. Unit Size: 25kg drums

A flexible 0.6mm composite damp proof course and cavity tray system. It is supplied in 20m rolls and available in a wide-variety of widths. Unit Size: 100mm x 20m roll