Waterproofing

Wykamol CM8 Geotextile membrane is a twin layered cavity drain membrane and non-woven geotextile fabric.

Unit Size: 2m x 20m roll

.

GCP Bituthene 4000 is a self-adhesive, cross-laminated HDPE waterproofing membrane with enhanced bonding characteristics. Unit Size: 1m x 20m roll

A rapid drying one coat surface damp proof membrane, ideal for fast track installations, apply ARDEX DPM 1 C R to protect the floorcovering installation from residual construction moisture and ground water vapour. Unit Size: 6kg

Fosroc Proofex Angle Fillets are strips fixed at all floor and wall junctions with a 6mm bead of Nitoseal MB175.

A heavy duty, traditional DPC and cavity tray system manufactured with a polyester reinforced carrier, rubber modifed bituminous coating and surfaced on both sides with a fne silica sand. Unit Size: Supplied in 8m length rolls 1000mm wide

A two pack solvent free polymer modified epoxide coating which cures to give a continuous tough but flexible waterproof coating. Unit Size: 5kg (2-part)

A cold applied, high density polyethylene film bonded to aluminium foil and coated with bitumen/rubber self adhesive layer with a removable reinforced silicone release paper. Unit Size: 300mm x 20m

Sikadrainage Membrane consists of molded high-density polyethylene and polypropylene membranes and fixing/sealing materials. Unit Size: Roll

GCP Betec Flex is a two component flexible crack bridging cement based coating designed for the waterproofing of new and existing structures such as basements, elevator pits, concrete tanks, reservoirs and planter boxes. Unit Size: A Component: 9kg plastic pails B Component: 23kg bags

PUDLO Self Seal is a self-adhesive, high performance, cold applied waterproof membrane manufactured from tough HDPE film and a layer of rubber modified bitumen adhesive.

Unit Size: 1.05M X 19.05M

GCP Bituthene LM is a two component elastomeric liquid applied detailing compound for use with GCP Applied Technologies waterproof membranes. Unit Size: 5.7 litre pack (Parts A & B)

A high performance sodium bentonite and butyl rubber. Unit Size: The waterstop bar is 20mm x 25mm x 5m long

GCP Serviseal Exp Coil is a passive external PVC waterstop system manufactured in a range of sizes Unit Size: Each

A high performance polymeric material, available in widths from 100mm to 1000mm, supplied in rolls 20m long. Unit Size: Length 20m long rolls Widths (various available) 100,150, 225, 300, 375, 450, 600, & 1000mm

A normal setting liquid waterproofing admixture for mortar and concrete. Unit Sizes: 25 ltr

A 10m long x 250mm wide section of polyethylene with 2butyl selvedge strips. It is used by bending at 90° along its length for application between horizontal and vertical membrane to provide waterproofing continuity and it also connects with internal and external corner pieces. Proofex L section is supplied with a butyl "closure" strip at each end. Unit Size: 125mm x 125mm x 10m

Flexcrete Cementitious Coating 851 is a two component, polymer modified, cementitious waterproof coating for internal or external structural waterproofing of concrete and other mineral substrates.

Unit Size: 30kg composite packs, 2 part product

A two pack solvent free polymer modified epoxide coating which cures to give a continuous tough but flexible waterproof coating. Unit Size: 5kg (2-part)

Juta Hydrolock Paste is a plastic bentonite paste which is specifically designed for structural waterproofing. It is easy to use, has excellent water absorption capacity and is biologically harmless, weather resistant, solvent free and frost resistant. Unit Size: 25kg