Waterproofing

A cold applied, flexible, high performance waterproofing and radon barrier membrane, incorporating a cross laminated HDPE carrier film with a polymer modified bitumen compound. Unit Size: 1m x 20m

GCP Aerofil 2 is a high density, compressible closed cell, polyethylene filler for movement joints in civil/structural works and water retaining structures Unit Size: 50mm x 0.8m x 2m (1.6m²)

A modifed bitumen rubber membrane with a self adhesive coating protected by a removable polyethylene release flm. It is dark grey on the upper surface. Unit Size: 1m x 20m roll

A trowel-grade, sodium bentonite/butyl-rubber based sealant, designed for use with the Structureseal system. Unit Size: 15 ltr tub

A post applied self-adhesive waterproofing sheet membrane. It is based on a top layer of polyethylene film bonded to a layer of bitumen/polymer adhesive carried on a release paper, with a selvedge strip. Unit Size: 1.05m x 19.05m

Visqueen Ultimate Gas DPC utilises Visqueen's Advanced Barrier Technology. The DPC is a 0.5mm thick, flexible 7 layer co-extruded film providing volatile organic compound (VOC) and ground gas resistance. Unit Size: 600mm x 20m

A modifed bitumen rubber tanking membrane. It has a sanded fnish to the top surface and a heat dispersible flm on the underside. Unit Size: 1m x 8m roll

Visqueen Ultimate Gas DPC utilises Visqueen's Advanced Barrier Technology. The DPC is a 0.5mm thick, flexible 7 layer co-extruded film providing volatile organic compound (VOC) and ground gas resistance. The DPC has an embossed/debossed fnish, is coloured gold/white and can be installed with either surface facing upwards. Unit Size: 750mm X 20m roll

.

Extra hard nails for use with the Trak-It C5 gas fixing tool. Unit Size: Sold per box, 700 in a box

Cetco Cetbit 300 is a self-adhering waterproofing membrane consisting of 1.4mm of rubberised bitumen integrally bonded to a 0.1mm cross-laminated HDPE protective film. These two components combine to offer an extremely effective waterproofing barrier with a factory controlled thickness to ensure uniform application. Unit Size: Roll Width 1m, Roll Length 20m, Roll Area 20 sqm, Roll Weight 32kg

A blend of high-grade silicates and wetting agents, held in suspension with water as a carrier. Once applied to the concrete surface, this unique product seals the concrete surface. Unit Size: 25kg

A two coat, cold applied damp proof membrane, which dries to a uniform gloss black finish. The coating is a solution of natural and petroleum bitumens in white spirit. Unit Sizes: 25 ltr

A two-component, low odour, rapid curing, high solids, PUA/PU hybrid primer for consistent and durable adhesion of Sikalastic® Systems on cement based substrates. Unit Sizes: 11.5ltr (Part A=8.89ltr, Part B=2.61ltr)

Cetco Volseal 250 is a highly elastic waterproof coating consisting of aggregates, cement-based binders and acrylic polymers. Unit Size: 25kg bag (Part A Powder) and 10kg Pails (Part B Liquid)

Juta GP Titantech DPC is a unique single layer, embossed high performance, gas and hydrocarbon resistant DPC. Unit Size: 900mm x 20m

A two component, polymer modified, flexible, cement based, waterproof coating for concrete and masonry. Unit Size: 20kg

Cetco Aquadrain ICD 8mm is a medium capacity drainage membrane (4 litres/m²) for floors and walls both above and below ground level. Unit Size: 2.07m x 20m* *including flat overlapping edge (flange) without studs, working area ca. 40m²

Sikadrainage Membrane consists of molded high-density polyethylene and polypropylene membranes and fixing/sealing materials. Unit Size: Roll

A crystalline grout used to create an internal or external waterstop at construction joints, pipe penetrations, tie-holes and control joints. Unit Size: 25kg

A cementitious crystalline slurry that is applied to horizontal and vertical construction joints to provide additional waterproofing protection, and protect rebar from corrosion. Unit Size: 25kg

Juta PD1700 includes a high compressive strength Cuspate High Density Polyethylene (HDPE) Drainage core with a geotextile filter bonded to one side. It is designed as a high flow medium to alleviate hydrostatic pressure on below ground structures, as well as providing protection to the underlying membrane (gas/waterproofing). Unit Size: 8mm x 2m x 20m

A two component bituminous liquid membrane for waterproofing of underground structures and intricate details in conjunction with Proofex waterproofing systems. Unit Size: 28kg pack