Waterproofing

GCP Preprufe 160R is unique composite sheets comprised of a thick HDPE film, pressure sensitive adhesive, and weather resistant protecting coating. Unit Size: Roll

Sika Tricosal BV DA240 is highly flexible waterstops made from PVC/NBR copolymer for sealing expansion and construction joints in watertight concrete structures. Unit Size: Roll

.

GCP Preprufe 300R is unique composite sheets comprised of a thick HDPE film, pressure sensitive adhesive, and weather resistant protecting coating. Unit Size: Roll

A preformed L-shaped SikaProof® A membrane sheet in 1.0 m width folded in 50/50 cm with a self-adhesive strip on both sides for a faster and easier application of perimeter edges, corners and connections. Unit Size: 1m x 20m

GCP Hydroduct 200 is a polypropylene non-woven filter fabric on one face of a 12mm studded drainage core with a pressure dissipation plastic film bonded to the other face. Applied to walls of basements that have been waterproofed with Bituthene membranes. Also applied to existing basement walls and permanent shuttering prior to the application of Preprufe membranes. Unit Size: 1.25m x 32m x 12mm

Juta GP Titanflex gas and hydrocarbon barrier is a multi-layer, polyethylene membrane. It is specifically designed, manufactured, tested and certified to perform as a methane, carbon dioxide, radon ground gas, VOC, air moisture and hydrocarbon protection system. Unit Size: 0.5mm x 2m x 50m

A flexible 0.6mm composite damp proof course and cavity tray system. It is supplied in 20m rolls and available in a wide-variety of widths. Unit Size: 600mm x 20m roll

A flexible polyolefin (FPO) self-adhesive sheet membrane. Designed to be used for post-applied fully bonded below ground waterproofing of existing reinforced concrete structures. Unit Size: 1m x 20m

GCP Hydroduct 200 is a polypropylene non-woven filter fabric on one face of a 12mm studded drainage core. Applied to walls of basements that have been waterproofed with Bituthene membranes and Servipak protection boards. Unit Size: 1.25m x 32m x 12mm

A preformed L-shaped SikaProof® A membrane sheet in 1.0 m width folded in 50/50 cm with a self-adhesive strip on both sides for a faster and easier application of perimeter edges, corners and connections. Unit Size: 1m x 25m

A cold applied, fast drying, two coat black bitumen coating, which dries to form a water and water vapour barrier. Unit Sizes: 25 ltr and 205 ltr

Swellable hydrophilic polymer waterstops. Manufactured from thermoplastic synthetic rubber, the products are lightweight and highly flexible. Unit Size: 10m long strips, 20mm wide and 10mm high.

A flexible waterproofing tape on polyvinyl chloride (PVC) with advanced adhesion properties. The tape seals construction and connection joints on concrete or metal substrates. Unit Sizes: 1.6mm thickness x 30m length x 220mm width

A flexible waterproofing tape based on modified flexible Polyolefin (FPO) with advanced adhesion properties. It has red masking tape on one side for easier application over expansion joits. Unit Size: 1 roll of 25m length Varying widths available: 10, 20, 30cm

GCP Preprufe 800PA LT is an advanced, self-adhesive Preprufe Membrane for protection of below ground structures. Preprufe 800PA Low Temperature (LT) Membrane for low temperature applications when surface and ambient temperatures are between -5°C and 20°C. Unit Size: 1.2m x 35m roll

A flexible 0.6mm composite damp proof course and cavity tray system. It is supplied in 20m rolls and available in a wide-variety of widths. Unit Size: 500mm x 20m roll

.

Cetco Coreflash NR is a nominal 1.5mm thick non-reinforced solid white thermoplastic flashing membrane with excellent UV, tear, puncture and flame resistance. Coreflash NR is also resistant to most forms of fungus, algae and micro-biological attack. Unit Size: 1.55m x 12.9m rolls

Ardex WPM 200 provides a surface applied water and vapour barrier or priming layer to concrete, screeded, rendered or masonry surfaces, steel and other vertical as well as horizontal hard surfaces. Unit Size: 20ltr

Ardex WPM 200 provides a surface applied water and vapour barrier or priming layer to concrete, screeded, rendered or masonry surfaces, steel and other vertical as well as horizontal hard surfaces. Unit Size: 20ltr

GCP GGM400 Gas Membrane is a loose laid sheet membrane system designed to protect buildings against the ingress of methane, radon, carbon dioxide, hydrocarbon vapours and water vapour. Unit Size: 2m x 50m roll This product is not purchasable on the website. Please call or email to place your order.

A polyolefin (FPO) based sheet membrane for pre-applied fully bonded below ground waterproofing of reinforced concrete structures. Unit Size: 1m x 20m

Cetco Coreflash UV is a nominal 1.5mm thick reinforced thermoplastic flashing membrane with excellent UV, tear, puncture and flame resistance. Coreflash UV is also resistant to most forms of fungua, algae and microbiological attack. Unit Size: 1.55m x 12.9m rolls