Waterproofing

GCP Bituthene Primer B1 is a quick drying all temperature primer to enable same hour application of Bituthene membranes. Unit Size: 5 ltr can

A rapid setting waterproofing admixture, which when mixed with ordinary Portland cement and water, sets rapidly to seal areas of severe water infiltration through concrete, rock or masonry. Unit Size: 5ltr

Pre-fabricated 'top-hat' sections for use around incoming pipes. Unit Size: 110mm diameter, 130mm diameter, 160mm diameter

Juta GP Primer is a quick drying, cold applied bituminous solution designed to penetrate and seal porous surfaces prior to the application of covering materials. Unit Size: 5 ltr and 25 ltr

Visqueen EcoMembrane DPM is manufactured from a minimum 90% recycled polyethylene. All rolls are supplied multi folded. Unit Size: 4m x 25m

Wykamol flexible jetting eye is designed to allow cleaning of the channel system and also as an inspection port.

Unit Size: each

MasterSeal 583 Cement Based Slurry is a blend of Portland cements, selected aggregrates and spray dried polymer modifying agents. Unit Size: 25kg

Heydi Powder is a plugging compound which rapidly hardens when exposed to water. Unit Size: 5kg

Pre-fabricated 'top-hat' sections for use around incoming pipes. Unit Size: 110mm diameter, 130mm diameter, 160mm diameter

Sika®-1 Pre-bag Spritz Mortar is part of the Sika® 1 Pre Bagged Structural Waterproofing System. Unit Size: 25kg

Juta Hydrolock Strip is a swellable bentonite joint sealing tape with crystallisation additives. Hydrolock Strip is used as a waterstop in concrete construction joints, and is tested and approved up to 7 bar water pressure. Unit Size: 5m x 20mm x 25mm

CD Channel to encourage collected water to sump chambers or gravity fed outlets. L: 2m H: 106mm D: 85mm

RIW Aqua Channel is pre-formed in a pentagonal shape, with pre-drilled 19mm holes at 70mm centres along its length. Aqua Channel is an internal peripheral PVC drainage conduit that has been specifically designed for the control of water ingress in below ground situations. Unit Size: 2m lengths

A black, flexible 0.6mm damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 450mm x 20m roll

Pre-fabricated 'top-hat' sections for use around incoming pipes. Unit Size: 110mm diameter, 130mm diameter, 160mm diameter

RIW Sheetseal Primer is a bitumen solution. Unit Size: 5 ltr, 25ltr

Triton Aqua Channel is part of a cavity drain system and designed to be used in conjunction with Platon cavity drain membranes. Unit Size: 2m

Sika Screeding Mortar when mixed with water provides the multicoat components for the structural waterproofing systems Unit Size: 25kg bag

Sika 1 Finishing Mortar is part of the Sika 1 Pre-Bagged Structural Waterproofing System. These special mortars are pre-bagged kiln dried blends of specially graded aggregates and cements, with waterproofing admixtures, packaged in 4 grades at the appropriate mix ratios for optimum application performance and durability. Unit Size: 25kg

Sika®-1 Pre-bag Render Mortar is part of the Sika® 1 Pre-Bagged Structural Waterproofing System. Unit Size: 25kg