Waterproofing

A mechanical plug specifically designed to seal the void formed in a concrete wall by the removal of a taper tie rod or pass through tie sleeve.

A flexible black plastic strip, 2m long, 25mm high and 2mm thick. The strip is pre-drilled at 150mm centres with 8mm diameter holes (13 holes per strip). The strip are supplied individually.

Petrolatum Tape provides anti-corrosion protection of gas, water, oil and other pipes, pipeline valves and fittings, structural steel pipework and any other exposed metal parts Unit Size: Roll

A tough, high quality modified bituminous Protection Board for waterproofing insulation. Unit Size: 1m x 2m

A a black, flexible 0.6mm damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers.

Unit Sizes: 100mm x 20m

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Size: 100mm x 20m roll

A galvanised steel bonding strip with 5mm holes at 15mm centres in a solid plastic holder. Unit Size: 12mm wide x 10m long x 1mm thick

Petrolatum Tape provides anti-corrosion protection of gas, water, oil and other pipes, pipeline valves and fittings, structural steel pipework and any other exposed metal parts Unit Size: Roll

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 112.5mm x 20m roll

Cetco Cetseal is a multi-purpose, single component polyether moisture cure sealant/adhesive. Cetseal is a low VOC, 100% solids, non-shrinking product with excellent UV resistance. Unit Size: 290ml cartridge

A gun grade adhesive for bonding of supercast SW Unit Size: 380ml cartridge

Wykamol Waterguard drainage outlet is used to get water from the channels to the sump chamber or existing drain.

Unit Size: Each

A black, flexible 0.6mm damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 150mm x 20m roll

Petrolatum Tape provides anti-corrosion protection of gas, water, oil and other pipes, pipeline valves and fittings, structural steel pipework and any other exposed metal parts Unit Size: Roll

A small PVC moulded connector piece to link two lengths of CD Channel.

Visqueen UDG Corner Units (unit dimension 150mm x 150mm x 150mm) should be positioned at the external corners of the crate system

A self-adhesive vinyl tape. Unit Size: 48mm wide rolls x 50m long

The Triton Aqua Channel Connector is a simple connector piece to formly hold together lengths of Aquachannel

.

Used to join two pieces of Aqua Channel together.

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 150mm x 20m rolls

Febtank Plug, when mixed with clean water, provides a ready to use rapid-setting durable plugging compound for active leaks in masonry and concrete. Unit Size: 5kg

A one part polymer modified cement based waterproof coating comprising of special cement based components and admixtures. When mixed with water a slurry or mortar material is produced for direct application to a variety of construction substrates. Unit Size: 25kg bag

A single-sided adhesive tape. It consists of a butyl rubber adhesive that is covered with a release liner. Unit Size: 10m roll

RIW Krytonite Adhesive is specially designed to adhere Krytonite Swelling Waterstop to concrete construction joints and penetrations that require waterproofing. Krytonite Adhesive has incredible bonding strength, even on damp concrete surfaces and can be used in all seasons. Unit Size: 290ml

Used to form a seal around the neck of the Platon Brick Plug and the membrane when the plug is driven home into the substrate. Unit Size: 5m

GCP Bentorub MS Fixer is a 1 component, caulk applied elastic MS-polymer adhesive. MS Fixer cures into an elastic compound with very good adhesion to most construction materials. MS Fixer is specially developed as adhesive for the Colflex range of EPDM membranes. Unit Size: 400cm³ sausages

Power Flowstop Adhesive is a single-component solvent-free high-pressure adhesive for bonding of MASTERSTOP and FLOWSTOP swelling tapes. Unit Size: 310ml cartridge

A swellable high performance, one component, of-white polyurethane adhesive supplied in 310ml cartridges. Unit Size: 310ml

Masterlife WP 912 Hydroswelling Mastic is a one-component, moisture curing pre-polymer which is reswellable when in contact with water. Unit Size: 310ml Cartridges

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 225mm x 20m roll

A double-sided butyl rubber tape. Unit Size: 10mm x 5m - 2 per box

A flat sheet, made of organic fibres saturated with bitumen. The board is resistant to water, ground salts and most corrosive chemicals. Unit Size: 3mm x 900mm x 2020

A white, flame retardant, flexible sealant supplied in 380ml cartridges. Unit Size: 380ml

Visqueen Masonry Plugs are made from Polyoxymethylene (10mm diameter and 75mm in length) Unit Size: 100 per box

Wykamol Waterguard Channel is a PVC drainage conduit for the control of water ingress in below ground waterproofing situations.

Unit Size: 2 metres

A 10mm bead of butyl rope, which is used to either wrap around the head of plugs in membrane installation, or to form a jointing waterproof seal on walls and floor membrane systems. Unit Size: 10mm wide x 5m long

A PVC moulded unit used to provide cleaning, inspection, and maintenance access to the water channel system.