Waterproofing

Cetco Coredisc is a nominal 100mm (4") round x 1.5mm (60 mil) thcik non-reinforced thermoplastic disc. Coredisc is also resistant to most forms of fungus, algae and micro-biolocial attack. Unit Size: 100 Corediscs per box.

A 2 part, polyurea/polyurethane-hybrid primer for cementitious substrates. The rapid curing performance allows overcoating of Sika Liquid Applied Membrane (LAM) roofing systems after 30 minutes. Unit Size: 11.5ltr (Part A=9ltr, Part B=2.5ltr)

A self-adhesive tape, with a carrier film and release liner, for internal jointing of Sikaproof A+ waterproofing system. Unit Size: 25m roll

Juta Hydrolock Paste is a plastic bentonite paste which is specifically designed for structural waterproofing. It is easy to use, has excellent water absorption capacity and is biologically harmless, weather resistant, solvent free and frost resistant. Unit Size: 25kg

A two pack solvent free polymer modified epoxide coating which cures to give a continuous tough but flexible waterproof coating. Unit Size: 5kg (2-part)

Flexcrete Cementitious Coating 851 is a two component, polymer modified, cementitious waterproof coating for internal or external structural waterproofing of concrete and other mineral substrates.

Unit Size: 30kg composite packs, 2 part product

A 10m long x 250mm wide section of polyethylene with 2butyl selvedge strips. It is used by bending at 90° along its length for application between horizontal and vertical membrane to provide waterproofing continuity and it also connects with internal and external corner pieces. Proofex L section is supplied with a butyl "closure" strip at each end. Unit Size: 125mm x 125mm x 10m

A normal setting liquid waterproofing admixture for mortar and concrete. Unit Sizes: 25 ltr

A high performance polymeric material, available in widths from 100mm to 1000mm, supplied in rolls 20m long. Unit Size: Length 20m long rolls Widths (various available) 100,150, 225, 300, 375, 450, 600, & 1000mm

GCP Serviseal Exp Coil is a passive external PVC waterstop system manufactured in a range of sizes Unit Size: Each

A high performance sodium bentonite and butyl rubber. Unit Size: The waterstop bar is 20mm x 25mm x 5m long

GCP Bituthene LM is a two component elastomeric liquid applied detailing compound for use with GCP Applied Technologies waterproof membranes. Unit Size: 5.7 litre pack (Parts A & B)

PUDLO Self Seal is a self-adhesive, high performance, cold applied waterproof membrane manufactured from tough HDPE film and a layer of rubber modified bitumen adhesive.

Unit Size: 1.05M X 19.05M

GCP Betec Flex is a two component flexible crack bridging cement based coating designed for the waterproofing of new and existing structures such as basements, elevator pits, concrete tanks, reservoirs and planter boxes. Unit Size: A Component: 9kg plastic pails B Component: 23kg bags

Sikadrainage Membrane consists of molded high-density polyethylene and polypropylene membranes and fixing/sealing materials. Unit Size: Roll

A cold applied, high density polyethylene film bonded to aluminium foil and coated with bitumen/rubber self adhesive layer with a removable reinforced silicone release paper. Unit Size: 300mm x 20m

A two pack solvent free polymer modified epoxide coating which cures to give a continuous tough but flexible waterproof coating. Unit Size: 5kg (2-part)

A heavy duty, traditional DPC and cavity tray system manufactured with a polyester reinforced carrier, rubber modifed bituminous coating and surfaced on both sides with a fne silica sand. Unit Size: Supplied in 8m length rolls 1000mm wide

Fosroc Proofex Angle Fillets are strips fixed at all floor and wall junctions with a 6mm bead of Nitoseal MB175.

A rapid drying one coat surface damp proof membrane, ideal for fast track installations, apply ARDEX DPM 1 C R to protect the floorcovering installation from residual construction moisture and ground water vapour. Unit Size: 6kg

GCP Bituthene 4000 is a self-adhesive, cross-laminated HDPE waterproofing membrane with enhanced bonding characteristics. Unit Size: 1m x 20m roll

.

Wykamol CM8 Geotextile membrane is a twin layered cavity drain membrane and non-woven geotextile fabric.

Unit Size: 2m x 20m roll

A blend of high-grade silicates and wetting agents, held in suspension with water as a carrier. Once applied to the concrete surface, this unique product seals the concrete surface. Unit Size: 25kg

A two component bituminous liquid membrane for waterproofing of underground structures and intricate details in conjunction with Proofex waterproofing systems. Unit Size: 28kg pack

Juta PD1700 includes a high compressive strength Cuspate High Density Polyethylene (HDPE) Drainage core with a geotextile filter bonded to one side. It is designed as a high flow medium to alleviate hydrostatic pressure on below ground structures, as well as providing protection to the underlying membrane (gas/waterproofing). Unit Size: 8mm x 2m x 20m

A crystalline grout used to create an internal or external waterstop at construction joints, pipe penetrations, tie-holes and control joints. Unit Size: 25kg

A cementitious crystalline slurry that is applied to horizontal and vertical construction joints to provide additional waterproofing protection, and protect rebar from corrosion. Unit Size: 25kg

Cetco Aquadrain ICD 8mm is a medium capacity drainage membrane (4 litres/m²) for floors and walls both above and below ground level. Unit Size: 2.07m x 20m* *including flat overlapping edge (flange) without studs, working area ca. 40m²

Juta GP Titantech DPC is a unique single layer, embossed high performance, gas and hydrocarbon resistant DPC. Unit Size: 900mm x 20m

A two component, polymer modified, flexible, cement based, waterproof coating for concrete and masonry. Unit Size: 20kg

A post applied self-adhesive waterproofing sheet membrane. It is based on a top layer of polyethylene film bonded to a layer of bitumen/polymer adhesive carried on a release paper, with a selvedge strip. Unit Size: 1.05m x 19.05m

Cetco Volseal 250 is a highly elastic waterproof coating consisting of aggregates, cement-based binders and acrylic polymers. Unit Size: 25kg bag (Part A Powder) and 10kg Pails (Part B Liquid)

Flexcrete Cemprotec E942 incorporates the benefits of copolymer and epoxy resin technologies into a water based cementitious system to give a hard, durable coating with excellent resistance to water, chloride ions, oxygen and aggressive chemicals.

Unit Size: 30kg

A two-component, low odour, rapid curing, high solids, PUA/PU hybrid primer for consistent and durable adhesion of Sikalastic® Systems on cement based substrates. Unit Sizes: 11.5ltr (Part A=8.89ltr, Part B=2.61ltr)

A two coat, cold applied damp proof membrane, which dries to a uniform gloss black finish. The coating is a solution of natural and petroleum bitumens in white spirit. Unit Sizes: 25 ltr

Cetco Cetbit 300 is a self-adhering waterproofing membrane consisting of 1.4mm of rubberised bitumen integrally bonded to a 0.1mm cross-laminated HDPE protective film. These two components combine to offer an extremely effective waterproofing barrier with a factory controlled thickness to ensure uniform application. Unit Size: Roll Width 1m, Roll Length 20m, Roll Area 20 sqm, Roll Weight 32kg

Extra hard nails for use with the Trak-It C5 gas fixing tool. Unit Size: Sold per box, 700 in a box

GCP Aerofil 2 is a high density, compressible closed cell, polyethylene filler for movement joints in civil/structural works and water retaining structures Unit Size: 50mm x 0.8m x 2m (1.6m²)

.

Visqueen Ultimate Gas DPC utilises Visqueen's Advanced Barrier Technology. The DPC is a 0.5mm thick, flexible 7 layer co-extruded film providing volatile organic compound (VOC) and ground gas resistance. The DPC has an embossed/debossed fnish, is coloured gold/white and can be installed with either surface facing upwards. Unit Size: 750mm X 20m roll

A modifed bitumen rubber tanking membrane. It has a sanded fnish to the top surface and a heat dispersible flm on the underside. Unit Size: 1m x 8m roll

Visqueen Ultimate Gas DPC utilises Visqueen's Advanced Barrier Technology. The DPC is a 0.5mm thick, flexible 7 layer co-extruded film providing volatile organic compound (VOC) and ground gas resistance. Unit Size: 600mm x 20m