Waterproofing

A normal setting liquid waterproofing admixture for mortar and concrete. Unit Sizes: 5ltr and 25 ltr

CD Flexible Jetting Eye for maintenance access L: 200mm H: 106mm D: 85mm Jetting Eye: 150-250mm

Sika 4 Rapid Setting is used to aid the quick setting of cement based renders and concretes where low water pressure or slow moving water exists. Unit Size: 5 ltr

Juta Pile Head Sealer is a crystalline cementitious waterproof slurry which creates a monolithic bond to the structure and seals the pile head. Unit Size: 20kg

A reinforcing mesh for use in conjunction with Proofex LM for angles and pipe penetrations etc. Unit Size: 100mm x 50m

A pre-formed pipe collar with a flat based to simplify pipe penetration details. Available in standard diameters 110mm and 160mm.

A two coat, cold applied damp proof membrane, which dries to a uniform gloss black finish. The coating is a solution of natural and petroleum bitumens in white spirit. Unit Sizes: 5 ltr and 25 ltr

GCP Aquatec Super XA is a rigid, cement based coating and dry broadcast system for crystalline waterproofing of concrete trough saturation of the capillaries. Unit Size: 20kg

Wykamol Corner Strip is a tape used to seal membranes at walls and floors and to fix perimeter drainage channels in place.

Unit Size: 150mm x 20m roll

The Sika Fuko Injection Junction Box can be installed in concrete construction joints to waterproof them and also to seal any cracks or voids in the joint areas. Unit Size: Box of 5

GCP Adcore Mastic is a hydrophilic mastic for use as a bedding bead on irregular concrete surfaces prior to the application of Adcor 500S or Adcor 500T. Unit Size: 310ml cartridge

Cetco Voltex DS is a proven waterproofing membrane ideal for vertical and horizontal foundation surfaces. Unit Size: 1.1 x 5m roll

PUDLO Render Seal is a Type A cementitious ready mixed surface waterproofer.

Unit Size: 25kg

A double-sided, self-adhesive tape based on a butyl rubber adhesive covered with a release liner Unit Size: 50mm x 20m

GCP Betec Plug is a quick setting, cementitious, waterproof plugging compound for stopping flowing/seeping water entry into sub-structures. Unit Size: 10kg

Cetco Voltex is a proven waterproofing membrane ideal for vertical and horizontal foundation surfaces. Unit Size: 1.1 x 5m roll

GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades. Unit Size: 25mm x 0.8m x 2m (1.6m²)

Wykamol Surefix Plugs are fixings to apply cavity drain membranes to the walls of both above and below ground structures.

Unit Size: pack

Used to form a seal between separate P8 membrane drops. Unit Size: 2mmx30mmx20m

A one part flowable shrinkage compensated general purpose cementitious mortar for waterproofing applications. Unit Size: 25kg

PUDLO Membrane BW is a high strength waterproofing material, comprised of geotextiles and sodium bentonite

Unit Size: 1.1m X 5m

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 750mm x 20m roll

Cetco SS80 Seamtape is a synthetic rubber-based general purpose preformed strip sealant with laminated polyester film. Colour: White Unit Size: 80mm x 35m rolls.

A sodium bentonite based material designed to stop water infiltration through insitu concrete construction joints. Unit Size: 25 x 19mm, supplied in 5m long coils

A single sided butyl rubber self adhesive tape. Unit Size: 150mm x 10m

.

A high performance polymeric material, available in widths from 100mm to 1000mm, supplied in rolls 20m long. Unit Size: Length 20m long rolls Widths (various available) 100,150, 225, 300, 375, 450, 600, & 1000mm

A grey, elastomeric water-swellable paste which is applied like a sealant. The hydrophilic properties of supercast SWX display good consistency in swell rate during repeated wet/dry cycling. Expansion of the product on contact with water creates a positive pressure against the faces of the concrete joint, thus preventing the passage of water. Unit Size: 600ml

Required for the installation of Platon P8 membrane.

GCP Adcor 500S is a thick sectioned, conformable, hydro-expansive waterstop for preventing water entry through joints in concrete substructures. Unit Size: 25mm x 20mm waterstop strip, supplied in 5m rolls

Masterlife WP 910 Waterbar provides simple but efficient waterproofing of construction joints. Unit Size: 10m ROLL

KIM contains Krystol technology, when added to concrete, Krystol chemically reacts with water and dehydrated cement particles to form insoluble needle-shaped crystals that fill capillary pores and micro-cracks in the concrete and block the pathways for water and waterborne contaminants. Unit Size: 8kg Bags

.

A swellable hydrophilic polymer waterstop. Manufactured from thermoplastic synthetic rubber, the product is lightweight and highly flexible. The strap is coloured orange for ease of recognition. Visqueen IGW Pipe Strap is supplied in packs of 5 straps.

Unit Size: Roll

A cold applied, high density polyethylene film, coated with a bitumen/rubber self adhesive layer with a removable reinforced silicone paper. Unit Sizes: 150mm x 20m long 300mm x 20m long

GCP Bituthene Primer W2 is a water-based surface conditioner specially formulated to prepare concrete, masonry and wood surfaces for the systems. Primer W2 is a low VOC water-based alternative primer for all GCP post-applied membranes. Unit Size: 5 litre can

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 900mm x 20m roll

GCP Betec NSM is a polymer-modified, fibre-reinforced, cementitious mortar for repairing and restoring concrete and masonry surfaces. The incorporation of plastic fibres minimises the risk of shrinkage cracking and the polymers ensure density and durability in the hardened mortar. Unit Size: 25kg

Visqueen Urban Drainage Geomembrane is a 100% recycled polyethylene geomembrane, black in colour, 0.5mm thick and supplied in multi folded rolls. Unit Size: 4m x 12.5m

A double-sided bitumen/rubber self-adhesive tape with a removable silicone release paper one side and a thin polyethylene removable sheet on the other. Unit Size: 150mm wide rolls x 15m long

.

GCP Betec 350 is a single component cementitious compound which is polymer modified and fibre reinforced. It is a rapid setting, high strength, waterproof compound used to seal tieholes that are created by formwork tie bars. Unit Size: 8kg