Waterproofing

Pre-fabricated 'top-hat' sections for use around incoming pipes. Unit Size: 110mm diameter, 130mm diameter, 160mm diameter

GCP Bituthene Primer B1 is a quick drying all temperature primer to enable same hour application of Bituthene membranes. Unit Size: 5 ltr can

.

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 450mm x 20m roll

An extra-quick setting liquid waterproofing admixture that causes almost immediate setting and very rapid hardening of Ordinary Portland Cement. Unit Size: 5ltr

RIW Aqua Channel Outlet consists of a 90° bend, with a male coupling, which is fitted to the base of a 200mm length of Aqua Channel; allowing water to be taken from the channel to the water collection point.

.

A 1-part, polymer modified, ready to use bitumen emulsion primer. Unit Size: 10 ltr

Cetco Sealmat is a self-bonding damp-proofing membrane, approximately 6.5mm thick, consisting of two polypropylene geotextiles, one woven and one non-woven, enclosing granular sodium bentonite at a minimum eight of 4.0kgm¯². Unit Size: 1.1m wide x 5m long

A single sided high strength aluminium tape coated with a high bond acrylic adhesive and a removable release flm protecting the adhesive coating. Unit Size: 75mm x 15m

Used at changes in direction of the Aqua Channel.

A double-sided butyl rubber tape Unit Size: 25mm x 20m

Cetco Voltex Granules are an active granular material used at detail areas that acquire additional protection. Unit Size: 20kg

Cetco DS30 Butyl Tape is a double-sided high-tack butyl tape, used for sealing inside GB-600 membrane overlaps as applicable. Unit Size: 30mm wide x 30lnm roll

GCP GGM400 Tape is a butyl tape for sealing laps

A pre-formed pipe collar with a flat based to simplify pipe penetration details. Available in standard diameters 110mm and 160mm.

Cetco Waterstop XP is an Expanding Waterstop for Concrete Construction Joints Unit Size: 10mm x 15mm x 6m roll

A black, flexible 0.6mm damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 600mm x 20m roll

GCP Aerofil 2 is a high density, compressible closed cell, polyethylene filler for movement joints in civil/structural works and water retaining structures Unit Size: 10mm x 0.8m x 2m (1.6m²)

Visqueen EcoMembrane DPM is manufactured from a minimum 90% recycled polyethylene. Unit Sizes: 0.3mm x 4m x 25m roll, 0.5mm x 4m x 12.5m

IKO-Pro SA Bitumen Primer is a fast drying rubber modified bituminous priming solution used to prepare substrates for application self-adhesive bitumen waterproofing membranes.

Unit Size: 5L

Longseal 100 is a high-performance, CE certified, cold-applied waterproof membrane. Unit Size: 300m x 20m roll

.

A high performance polymeric material, available in widths from 100mm to 1000mm, supplied in rolls 20m long. Unit Size: Length 20m long rolls Widths (various available) 100,150, 225, 300, 375, 450, 600, & 1000mm

The Sika Cavity Drainage System Corner Piece is installed at the corners of a perimeter drainage channel system to allow continuity of the drainage system.

The Sika Cavity Drainage System Channel T Piece is installed at the junction between wall and cross channel drainage system to allow continuity of the drainage system.

A reuseable metal sleeve to be used as part of the Proofex EFS range. Unit Size: Each

Juta Hydrolock is a mechanically bonded Geosynthetic Clay Liner (GCL) composite of pulverised bentonite embedded between two layers of geotextile. The internal 5kg of natural sodium bentonite swells in contact with water to form a low permeability waterproofing barrier. Unit Size: 1.15m x 5.1m

A 125mm corner piece made from polyethylene membrane with a 100mm butyl selvedge for use in conjuction with Proofex L Section.

.

GCP Armour tape is a great alternative to duct tape and works great as a site tape. Unit Size: Roll

.

The Sika flexible jetting eye has been designed to allow cleaning of the channel system and also an inspection port. The unique flexible upstand jetting point can be easily bent to allow the channel to be used in a wall port system. It also has the benefit of allowing slabs to be laid whilst still being easily accessible afterwards.

For the reinforcement of angles, corners and joints underneath ARDEX WPM 200 Solvent Free Multi Purpose Epoxide Liquid Waterproof Membrane. Unit : Each

GCP Aerofil 1 is a low density, compressible, closed cell polyethylene filler for structural expansion joints and building facades. Unit Size: 20mm x 0.8m x 2m (1.6m²)

A black elastomeric bituminous priming solution. Unit Size: 5ltr tin

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 600mm x 20 roll

Sika Plaster Plugs can be used with Sika mesh membrane systems and have a serrated head which can take plaster or dot and dab.

Cetco Voltex is a proven waterproofing membrane ideal for vertical and horizontal foundation surfaces. Unit Size: 1.1 x 5m roll

.

Surestop BWB is a red hydrophilic strip made of sodium bentonite and butyl rubber with a silicone-treated back paper.

Unit Size: 25x20mm X 5m

A 125mm corner piece made from polyethylene membrane with a 100mm butyl selvedge for use in conjuction with Proofex L Section.

GCP Bituthene Primer S2 is a rubber-based primer in solvent, specially formulated to provide good initial adhesion, for use with the Bituthene range of cold applied, self adhesive waterproof membranes. Unit Size: 5 ltr can

A 50mm wide double-sided butyl tape for sealing lap joint and for use in detailing work. Unit Size: 50mm x 30m x 1.5mm